| LY/T 1343-2014 English PDFLY/T 1343: Historical versions
 Basic dataStandard ID: LY/T 1343-2014 (LY/T1343-2014)Description (Translated English): Regulations of apparatus performance on tree seed testing Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B61 Classification of International Standard: 65.020.20 Word Count Estimation: 6,660 Date of Issue: 8/21/2014 Date of Implementation: 12/1/2014 Older Standard (superseded by this standard): LY/T 1343-1999 Quoted Standard: GB 2772 Regulation (derived from): State Forestry Bulletin No. 12 2014 Issuing agency(ies): State Forestry Administration Summary: This standard specifies the use of forest tree seed testing equipment, infrastructure and performance requirements. This standard applies to tree seed quality testing equipment and technical conditions. LY/T 1343-2014: Regulations of apparatus performance on tree seed testing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Regulations of apparatus performance on tree seed testing ICS 65.020.20 B61 People's Republic of China Forestry Industry Standard Replacing LY/T 1343-1999 Forest seed testing equipment technical conditions Published on.2014-08-21 2014-12-01 implementation State Forestry Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. Publication of this document The organization is not responsible for identifying these patents. This standard replaces LY/T 1343-1999 "Technical Conditions for Forest Seed Testing Instruments". This standard has been modified as follows. --- Revised the regulations on the use, basic structure and technical conditions of the instrument, including. sampler use, technical conditions, sample separator Way, basic structure, technical conditions, basic structure of germination box, technical conditions, oven use, basic structure, technical conditions, etc.; --- Increased electronic balance and incubator items; --- Removed the net type, inspection mirror and seed inspection necessary equipment, optional instrument items. This standard is under the jurisdiction of the National Forest Seed Standardization Technical Committee (SAC/TC115). This standard was drafted. China Forestry Research Institute, Nanjing Forestry University, Beijing Forestry University, Yunnan Forest Seedling Station, Gan Sustained forest seedlings workstation. The main drafters of this standard. Li Qingmei, Shen Yongbao, Gao Weidong, Peng Yudeng, Li Jiping, Wang Sang. The previous versions of the standard replaced by this standard are. ---LY/T 1343-1999. Forest seed testing equipment technical conditions1 ScopeThis standard specifies the use, basic structure and performance requirements of forest seed testing equipment. This standard applies to the technical conditions of the instrument for quality inspection of forest seeds.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB 2772 forest seed inspection procedures3 sampler3.1 Use In the implementation of GB 2772 for forest seed sampling, it is used for the extraction of the first sample of bagged small seeds. 3.2 Basic structure It is a metal tube with a pointed tip, a tube inner diameter of 10mm~14mm, and a pointed length of 60mm. There is a long oval hole near the tip. tube The length should be able to reach the center of the seed bag. 3.3 Performance requirements The tube is smooth and has no edges and corners. The tip and the body are tightly connected and the transition is gentle.4 sampler4.1 Cone Spectrometer 4.1.1 Use When performing GB 2772 for forest seed sampling, the sample to be taken from the mixed sample or the sample to be taken from the sample to be sent is taken. Product, suitable for seeds with high mobility. 4.1.2 Basic structure It consists of a funnel, a funnel bottom flap, a cone and a partition that divides the seed into two outlets. 4.1.3 Performance requirements a) The surface of the cone is smooth, the tip of the cone and the center of the funnel are on a vertical line, and the movable switch at the bottom of the funnel is flexible and tight. b) The weight error of the two seeds passing through the sampler shall not exceed 5% of the average weight of the two seeds. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1343-2014_English be delivered?Answer: Upon your order, we will start to translate LY/T 1343-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1343-2014_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1343-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version LY/T 1343-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1343-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |