LY/T 1285-2011 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 1285-2011: Sawn timber for ship Status: Valid LY/T 1285: Historical versions
Basic dataStandard ID: LY/T 1285-2011 (LY/T1285-2011)Description (Translated English): Sawn timber for ship Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B69 Classification of International Standard: 79.040 Word Count Estimation: 6,686 Date of Issue: 2011-06-10 Date of Implementation: 2011-07-01 Older Standard (superseded by this standard): LY/T 1285-1998 Quoted Standard: GB/T 449; GB/T 4822; GB/T 4823; GB/T 17659.2 Regulation (derived from): State Forestry Administration in 2011 Notice No. 9 Issuing agency(ies): State Forestry Administration Summary: This standard specifies the technical requirements of a ship timber, test methods. This standard applies to shipbuilding and repair. LY/T 1285-2011: Sawn timber for ship---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Sawn timber for ship ICS 79.040 B69 People's Republic of China Forestry Industry Standard Replacing LY/T 1285-1998 Ship sawn timber Published on.2011-06-10 2011-07-01 implementation State Forestry Administration released ForewordThis standard replaces LY/T 1285-1998 "Ship Sawn Timber". Compared with LY/T 1285-1998, the main technical changes of this standard are as follows. ---Specified the main tree species of ship sawn timber; --- Delete the "3.2 size, upgrade" in the original standard; --- Increased the material requirements for the main components of the ship and adjusted the allowable limits of defects; --- Increased sampling methods for products. This standard was proposed by the State Forestry Administration. This standard is under the jurisdiction of the National Timber Standardization Technical Committee. This standard was drafted. National Timber Standardization Technical Committee, Log Saw Timber Subcommittee, National Fishery Ship Standardization Technical Committee, Dandong Forestry Bureau. The main drafters of the standard. Song Runhui, Wei Guangdong, Guan Fang, Wang Yiqi, Li Chunyu, Wang Tieli, Wang Hongjuan, Ma Pengcheng, Xu Hongxing, Yang Liangqing, Yuan Weijing, Cui Hongzhu. The previous versions of the standards replaced by this standard are. ---ZBB69001-1988; ---LY/T 1285-1998. Ship sawn timber1 ScopeThis standard specifies the technical requirements and inspection methods for ship sawn timber. This standard applies to shipbuilding and maintenance.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 449 sawn timber volume table GB/T 4822 sawn timber inspection GB/T 4823 sawn timber defect GB/T 17659.2 Sampling and determination of wood sawings - Part 2. Sampling and sampling method3 Technical requirements3.1 Applicable species Mainly. Pinuskoraiensis, Piceasperata, Abiesfabric, Larch (Larixgme- Lini), Chinese fir (Cunninghamialanceolata), Pinus massoniana (Pinus massoniana), Pinus sylvestris (Pinussylvestrisvar. Mongolica), Ulmusspp., Eucalyptusspp., Quercusmongolica, Acer Spp.), Fraxinus mandshurica, Robiniapseudoacacia, Dipterocarpusspp. Dipterocarpusspp., Neobalanocarpusspp., Gambas (Kings) Spp.), Eusideroxylonspp., Intsiaspp. and other suitable species. 3.2 Dimensional deviation The dimensional deviation is shown in Table 1. Table 1 Dimensional deviation Type size range deviation length < 2.0m 3cm-1cm ≥2.0m 6cm-2cm Width, thickness < 30mm ±1mm ≥30mm ±2mm 3.3 Limitation of defects See Table 2 for the allowable limits of defects. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1285-2011_English be delivered?Answer: Upon your order, we will start to translate LY/T 1285-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1285-2011_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1285-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version LY/T 1285-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1285-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
