JJG 856-2015 English PDFUS$919.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. JJG 856-2015: Verification Regulation of Radiation Thermometers Status: Valid JJG 856: Historical versions
Basic dataStandard ID: JJG 856-2015 (JJG856-2015)Description (Translated English): Verification Regulation of Radiation Thermometers Sector / Industry: Metrology & Measurement Industry Standard Classification of Chinese Standard: A54 Classification of International Standard: 17.200 Word Count Estimation: 40,429 Date of Issue: 2015-12-07 Date of Implementation: 2016-06-07 Older Standard (superseded by this standard): JJG 856-1994; JJG 415-2001; JJG 67-2003 Quoted Standard: JJF 1001-2011; JJF 1007-2007; IEC/TS 62492-1-2008; ASTM E2847-2013 Regulation (derived from): ?AQSIQ 2015 Nian (No.148) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine Summary: This standard is applicable to the first verification and follow-up verification of the working radiation thermometer within the temperature range (-50 ~ 3000) ��. The working radiation thermometer of this standard refers to a single-band radiation thermometer with an emissivity setting of 1 and a colorimetric thermometer whose emissivity ratio can be set to 1, excluding infrared ear thermometer, infrared thermometer and contact type thermometer Radiation thermometer. JJG 856-2015: Verification Regulation of Radiation Thermometers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Verification Regulation of Radiation Thermometers National Metrological Verification Regulation of the People's Republic of China Working with radiation thermometer 2015-12-07 released 2016-06-07 implementation State Administration of Quality Supervision, Inspection and Quarantine issued Work with radiation thermometer verification procedures Replacing JJG 856-1994 JJG 415-2001 JJG 67-2003 Responsible unit. National Thermometer Technical Committee The main drafting unit. China Institute of Metrology Hubei Institute of Metrology and Testing Technology Participated in the drafting unit. Shanghai Industrial Automation Instrumentation Research Institute Beijing Aerospace Metrology and Testing Technology Research Institute Beijing Institute of Metrology and Testing This procedure entrusts the National Thermometer Technical Committee to explain The main drafters of this procedure. The original compliance East (China Institute of Metrology) Fu Chengyu (Hubei Institute of Metrology and Testing Technology) Xing Bo (China Institute of Metrology) Bai Chengyu (China Institute of Metrology) Participate in the drafters. Fan Kai (Shanghai Industrial Automation Instrumentation Research Institute) Wang Wenge (Beijing Aerospace Metrology and Testing Technology Institute) Liu Qian (Beijing Institute of Metrology and Measurement Science) table of ContentsIntroduction (II) 1 Scope (1) 2 References (1) 3 terms and units of measurement (1) 3.1 Terms (1) 3.2 Units of measurement (4) 4 Overview (4) 5 Metrological performance requirements (4) 5.1 inherent error (4) 5.2 Repeatability (4) 6 General technical requirements (5) 6.1 Appearance (5) 6.2 Optical systems (5) 6.3 Insulation resistance (5) 7 Metering device control (5) 7.1 Test conditions (5) 7.2 Verification Project (8) 7.3 Verification method (8) 7.4 Verification Data Processing (10) 7.5 Processing of test results (12) 7.6 Verification cycle (12) APPENDIX A Determination of Verification Distance (13) Appendix B Radiation Thermometer Aiming Method (15) Appendix C Blackbody radiation source Emissivity deviation from measurement error caused by 1 (16) Appendix D High temperature blackbody radiation source Glass window introduced window error correction (20) Appendix E Radiation Source Size Effect (22) Appendix F Verification Record Reference Format (26) Appendix G Verification Data Processing Example (27) Appendix H Test Certificate/Test Result Reference Form (29) Appendix J Examples of inherent error uncertainty assessment (31)IntroductionThis procedure refers to IEC /T S62492-1-2008 "Industrial process control devices Radiation thermometers Part 1. Radiation technical data "(Industrialprocesscontroldevices-Radiationthermometers- Part 1. Technicaldataforradiationthermometers), ASTME2847-2013 "Wide band infrared Thermometer calibration and accuracy test standard operating method "(StandardPractesforCalibrationand AccuracyVerificationofWidebandInfraredThermometers), ASTME1256-2011a " Standard test method (single band) "(StandardTestMethods for RadiationThermome- ters (SingleWavebandType)) and OIMLD24 (1996) "Total Radial Pyrometer" (TotalRadia- tionPyrometers). The terms refer to IEC /T S62492-1 and ASTME2847 The quasi-mode is based primarily on the requirements of IEC /T S62492-1, "Instrument Uncertainty", and ASTME2847 method. This procedure replaces JJG 856-1994 "Radiation thermometer for operation below 500 ℃", JJG 415-2001 " Role of radiation thermometer "and JJG 67-2003" working with the whole radiation thermometer "test procedures. With JJG 856- 1994, JJG 415-2001 and JJG 67-2003 compared to the main technical changes are as follows. --- apply to the work of the full range of radiation thermometer test, the measurement standards, test methods proposed a unified Claim; - the addition of new terms, the re-definition of some of the terms, the revision of the definition of some existing terms (3.1); - the combination of a blackbody radiation source or its reference thermometer as a metrological standard, allowing the use of a surface radiation source, Increase the infrared wavelength brightness temperature traceability method, provides a different technical indicators of the black body radiation source of the applicable conditions of use (7.1); --- Identify the method of determining the distance (Appendix A) and the aiming method of the radiation detector (Appendix B); --- Data processing increases the emissivity correction (7.3) requirements, using the application for all temperature ranges and spectra The scope is not limited to the correction method of shortwave high temperature measurement (Appendix C); - Increased radiation source size effect correction method and radiation source size effect temperature indication difference test method (Appendix E); - an example of the verification data processing (Appendix G) has been added; - for the main metrological standard form and the type of radiation detector to be tested, provided for the expansion of the metrological standard Uncertainty analysis, assessment methods and examples of quasi and full temperature zones (Appendix J). Prerequisites of this Code Release. --- JJG 856-1994 "Radiation thermometer for operation below 500 ℃"; --- JJG 415-86 "Working Radiation Thermometer" and JJG 415-2001 "Working Radiation Thermometer"; --- JJG 67-85 "Working Radiation Sensors" and JJG 67-2003 "Working Radiometer for Work". Work with radiation thermometer verification procedures1 ScopeThis procedure applies to the first test of the working radiation thermometer within the temperature range (-50 to 3000) ° C Follow-up test. The work of this program with a radiation thermometer refers to the emissivity setpoint can be set to 1 single-band radiation temperature And the emissivity ratio can be set to 1 colorimetric thermometer, excluding infrared ear thermometer, infrared thermometer and contact radiation thermometer.2 reference fileStandard Terminology and Definitions for JJF1001-2011 Terminology and definitions of temperature metrology nouns JJF1007-2007 Industrial process controlgear - Radiometer - Part 1. Radiation thermometer (IEC /T S62492-1..2008); Of the technical data (Industrialprocesscontroldevices-Radiationthermometers-Part 1. Technicaldataforradiationthermometers) Standard Practice for Calibrating and Accuracy Testing of Wide - Band Infrared Thermometers for ASTME2847-2013 (StandardPracticeforCalibrationandAccuracyVerificationofWidebandInfraredTher- mometers For dated references, dated only the version applies to this rule. Whichever is not dated , The latest version (including all amendments) applies to this procedure.3 terms and units of measurement3.1 terminology The following terms and other terms defined in JJF1001-2011 and JJF1007-2007 apply to this Code. 3.1.1 [effective] spectral brightness temperature [effective] spectralradiancetemperature At a given wavelength, the luminance of the spectral radiation is equal to that of the blackbody of the effective spectral radiation temperature. Note. 1 indicates the effective spectral brightness temperature, the wavelength should be stated. 2 can be referred to as spectral brightness temperature or brightness temperature when it is not confusing. 3 The actual measured amount of single-band radiation thermometer can be regarded as the effective spectral brightness temperature at its effective wavelength. 4 definition of the classic brightness temperature. heat radiator and blackbody in the same wavelength of spectral radiation equal brightness, said the black body temperature The temperature of the heat radiator at the wavelength of the wavelength. In practical applications, the thermometer in a finite spectral range of measurement results, also known as For the brightness temperature [JJF1007-2007, 5.20]. In the case of environmental radiation can be ignored, the effective spectral brightness temperature That is the classic brightness temperature. 3.1.2 [effective] brightness temperature [effective] radiancetemperature The temperature of the blackbody in the given wavelength range, the radiation intensity is equal to the effective radiation brightness of the measured heat radiator. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJG 856-2015_English be delivered?Answer: Upon your order, we will start to translate JJG 856-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of JJG 856-2015_English with my colleagues?Answer: Yes. The purchased PDF of JJG 856-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version JJG 856-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 856-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
