JJG 130-2011 English PDFUS$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. JJG 130-2011: Verification Regulation of Liquid-in-Glass Thermometers for Working Status: Valid JJG 130: Historical versions
Basic dataStandard ID: JJG 130-2011 (JJG130-2011)Description (Translated English): Verification Regulation of Liquid-in-Glass Thermometers for Working Sector / Industry: Metrology & Measurement Industry Standard Classification of Chinese Standard: A54 Word Count Estimation: 28,270 Date of Issue: 2011-09-20 Date of Implementation: 2012-03-20 Older Standard (superseded by this standard): JJG 130-2004; JJG 50-1996; JJG 618-1999; JJG 978-2003 Quoted Standard: JJG 160-2007; GB/T 514-2005; YB/T 2305-2007 Regulation (derived from): AQSIQ Announcement No. 153 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine Summary: This standard applies to: Measuring range -100��C ~ 600��C rod and the internal standard working glass liquid thermometer initial verification, testing and use of follow-up testing. Including general purpose glass liquid thermometer, petroleum product testing glass liquid thermometer, coking product testing liquid glass thermometer. This standard does not apply to external standard glass liquid thermometer. JJG 130-2011: Verification Regulation of Liquid-in-Glass Thermometers for Working---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Verification Regulation of Liquid-in-Glass Thermometers for Working State verification procedures People's Republic of China Working with liquid glass thermometer Issued on. 2011-09-20 2012-03-20 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Working with liquid glass thermometer test procedures Replacing JJG 50-1996 JJG 130-2004 JJG 618-1999 JJG 978-2003 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on September 20, 2011, and from From March 20, 2012 into effect. Focal point. the National Technical Committee of temperature measurement Drafting. Beijing Institute of Metrology detection China Institute of Metrology Guangdong Provincial Institute of Metrology Shanghai Institute of Measurement Liaoning Provincial Institute of Metrology Jizhou City Yaohua instrument Factory The temperature measurement procedures commissioned the National Technical Committee is responsible for interpretation The main drafters of this procedure. Zhang Ke (Beijing Institute of Metrology detection) Chang (China Institute of Metrology) Wang Ying (Beijing Institute of Metrology detection) Liang was there (the Guangdong Provincial Institute of Metrology) Drafters participate. Wu Jianying (Shanghai Institute of Measurement) Dong Liang (Liaoning Provincial Institute of Metrology) Xu Yan hair (Jizhou Yaohua instrument Factory) table of Contents1 Scope (1) 2. References (1) 3 Terms (1) 4 Overview (2) 4.1 Principle (2) 4.2 configuration and type (2) 5 metering performance requirements (4) 5.1 shows the value of stability (4) 5.2 Indication Error (4) 5.3 Linearity (4) 6 General Requirements (6) 6.1 scale with a flag (6) 6.2 glass rod and the glass tube (6) 6.3 temperature-sensitive foam, middle foam, foam safety (6) 6.4 liquid temperature and temperature of the liquid column (6) 7 control of measuring instruments (7) 7.1 Verification condition (7) 7.2 test item (8) 7.3 test methods (8) 7.4 Verification Results processing (11) 7.5 test cycle (11) Appendix A glass thermometer liquid petroleum product specifications and test point (12) Appendix B coking products glass thermometer liquid technical specifications and test point (16) Appendix C freezing point (0 ℃) production and use (17) Appendix D thermometer temperature liquid column repair method (18) Appendix E reference laboratory mercury thermometer disposal methods after crushing (19) Appendix F common sense depending on the liquid temperature coefficient of expansion (20) in the glass The basic requirements of Appendix G auxiliary thermometer (21) Appendix H Glass liquid thermometers are not predetermined correction formula under the conditions of use (22) Appendix J work thermometer calibration certificate (inside) format with a glass of liquid (23) Appendix K to work with liquid glass thermometer test results of notice (in-page) format (24) Working with liquid glass thermometer test procedures1 ScopeThe order applies to the measurement range in a bar and landmark work within -100 ℃ ~ 600 ℃ of liquid glass thermometer The initial verification, use and subsequent verification check. Including general-purpose liquid glass thermometers, petroleum products testing Glass liquid thermometer, coking products test glass liquid thermometer. The regulations apply to exterior glass landmark liquid temperature Meter. 2. References This procedure reference documents. JJG 160-2007 standard platinum resistance thermometer GB/T 514-2005 petroleum products Glass liquid thermometer technical conditions YB/T 2305-2007 coking products Glass thermometers For dated references, only the dated edition applies to this procedure; undated reference documents Member, the latest edition (including any amendments) applies to this procedure.3 Terms3.1 tick scaleline Engraved in the glass rod or scale plate to indicate the temperature values engraved lines. 3.2 scale value scalevalue Engraved in the glass rod or plate to indicate the temperature scale of the digital value. 3.3 scale plate scaleplate Internal standard glass thermometer liquid inside engraved tick, tick values and other symbols flat, colored (such as cream Color) sheet. 3.4 Main scale mainscale Scale measurement range section. 3.5 Major Ticks mainscaleline With numbers mark. 3.6 Division value divisionvalue Two adjacent tick marks corresponding to the difference between the temperature values. 3.7 Secondary scale auxiliaryscale To check the tick and tick value zero indication set. 3.8 Show score line expandedscale Thermometer scale line the upper and lower limits beyond measure. 3.9 Immersion logo immersionmark Bureau dip thermometer to indicate the flag line or immersion depth immersion position. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJG 130-2011_English be delivered?Answer: Upon your order, we will start to translate JJG 130-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of JJG 130-2011_English with my colleagues?Answer: Yes. The purchased PDF of JJG 130-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version JJG 130-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 130-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
