JJF 1324-2011 English PDF

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1324-2011: Calibration Specification for Pulsed Laser Rangetinders
Status: Valid

JJF 1324: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JJF 1324-2011	219	Add to Cart	3 days	Calibration Specification for Pulsed Laser Rangetinders	Valid
JJF 1324-1990	199	Add to Cart	2 days	O.T.N. of Primary Standard for Visual Diffuse Transmission Density	Obsolete

Similar standards

JJF 1406   JJF 1280   JJF 1126   JJF 1334   JJF 1318   JJF 1314   

Basic data

Standard ID: JJF 1324-2011 (JJF1324-2011)
Description (Translated English): Calibration Specification for Pulsed Laser Rangetinders
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A52
Classification of International Standard: 17.040
Word Count Estimation: 9,940
Date of Issue: 2011-11-30
Date of Implementation: 2012-03-01
Quoted Standard: GJB 1324-1991; GJB 2241A-2008; GJB 2740-1996
Regulation (derived from): State Administration of Quality Supervision, Inspection and Quarantine of 2011 No. 202
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine
Summary: This standard applies to single pulse emission and showing the value of not less than lm resolution pulsed laser rangefinder (hereinafter referred to as DME) calibration.

JJF 1324-2011: Calibration Specification for Pulsed Laser Rangetinders

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Pulsed Laser Rangetinders People's Republic of China National Metrology Technical Specifications Pulsed laser rangefinder calibration specification Issued on. 2011-11-30 2012-03-01 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Pulsed laser rangefinder calibration specification PulsedLaserRang efinders This specification by the State Administration of Quality Supervision, Inspection and Quarantine approved on November 30, 2011, and from From March 1, 2012 into effect. Focal point. the National Technical Committee of length measuring geometry The main drafting units. China Aviation Industry Corporation Beijing Great Wall Measurement and Testing Technology Research Institute Participated in the drafting unit. China North Industries second ○ five Institute Aviation Great Wall Measurement and Testing (Tianjin) Co., Ltd. China Ordnance Diwu San ○ eight plants Beijing Institute of Technology This specification length measuring geometry commissioned the National Technical Committee is responsible for interpretation The main drafters of this specification. Teachers will be born (China Aviation Industry Corporation Beijing Great Wall Institute of Measurement and Testing Technology) Cui Yanmei (China Aviation Industry Corporation Beijing Great Wall Institute of Measurement and Testing Technology) Cold Jie (China Aviation Industry Corporation Beijing Great Wall Institute of Measurement and Testing Technology) Drafters participate. South Yao (second ○ five Institute of China North Industries) Zhang Hong (CNAC measurement test Great Wall (Tianjin) Co., Ltd.) Yang Chen (China North Industries Diwu San ○ eight plants) Xu Rongfu (Beijing Institute of Technology)

table of Contents

1 Scope (1) 2. References (1) 3 terminology and units of measurement (1) 4 Overview (1) 5 Metrological characteristics (1) 5.1 ranging error (1) 5.2 HRR (1) 6 calibration conditions (1) 6.1 Environmental conditions (1) 6.2 measurement standards and equipment (1) 7 calibration items and calibration methods (2) 7.1 ranging error (2) 7.2 HRR (3) 8 calibration results expression (3) 9 Recalibration time intervals (3) Appendix A Measurement Uncertainty Example (4) Pulsed laser rangefinder calibration specification

1 Scope

This instruction applies to transmit a single pulse and pulse indication resolution of not less than 1m laser rangefinder (hereinafter referred to as the measure Distance meter) calibration. 2. References This specification refers to the following documents. GJB1324-1991 solid pulse laser rangefinder general specification GJB2241A-2008 pulse laser rangefinder performance test method GJB2740-1996 pulsed laser rangefinder parameters series For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 terminology and units of measurement

HRR distanceresolution Rangefinder in the beam propagation direction can distinguish between the minimum distance separation between the two goals.

4 Overview

DME refers to the use of laser pulses emitted from the measuring target distance of one meter, usually emitted by the laser Systems, laser receiving system, observe the targeting system and the power of four major components. Its working principle is to use pulsed laser Goal is to launch a single laser pulse, the counter measure laser pulse to reach the target by target diffuse to the receiving system Time interval, thereby calculating the distance to the target. Rangefinder mainly used for military, engineering, pipeline measurement, river, power, mining and other areas of investigation.

5 Metrological characteristics

5.1 ranging error 5.2 HRR

6 calibration conditions

6.1 Environmental conditions 6.1.1 indoor conditions. temperature. (20 ± 5) ℃, relative humidity. ≤80%. 6.1.2 outdoor conditions. no rain, no snow, no less than 3km atmospheric visibility through depending on the scene. 6.2 standards and measuring equipment Table 1 Standard and measuring equipment. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1324-2011_English be delivered?

Answer: Upon your order, we will start to translate JJF 1324-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1324-2011_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1324-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJF 1324-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJF 1324-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.