Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

JJF 1318-2011 English PDF

US$509.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1318-2011: Calibration Specification for Imaging Probe Measuring Machines
Status: Valid

JJF 1318: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
JJF 1318-2011509 Add to Cart 4 days Calibration Specification for Imaging Probe Measuring Machines Valid
JJF 1318-1990199 Add to Cart 2 days Operating Technical Norm of Luminance Secondary Standard Obsolete

Similar standards

JJF 1406   JJF 1280   JJF 1126   JJF 1313   JJF 1314   JJF 1310   

Basic data

Standard ID: JJF 1318-2011 (JJF1318-2011)
Description (Translated English): Calibration Specification for Imaging Probe Measuring Machines
Sector / Industry: Metrology & Measurement Industry Standard
Classification of Chinese Standard: A52
Classification of International Standard: 17.040
Word Count Estimation: 22,284
Date of Issue: 2011-11-14
Date of Implementation: 2012-02-14
Quoted Standard: JJF 1001; JJF 1094-2002; JJF 1130-2005; GB/T 24762-2009
Regulation (derived from): AQSIQ Announcement No. 165 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine
Summary: This standard applies to plane rectangular coordinate system image measuring instrument, including in the plane perpendicular to the direction of a Cartesian coordinate system with positioning or measuring function image measuring instrument.

JJF 1318-2011: Calibration Specification for Imaging Probe Measuring Machines

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Imaging Probe Measuring Machines People's Republic of China National Metrology Technical Specifications Image measuring instrument calibration specification Issued on. 2011-11-14 2012-02-14 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Image measuring instrument calibration specification Machines This specification by the State Administration of Quality Supervision, Inspection and Quarantine approved on November 14, 2011, and from From February 14, 2012 into effect. Focal point. the National Technical Committee of length measuring geometry Main drafting unit. Shenzhen Academy of Metrology and Quality Inspection China Institute of Metrology Zhejiang Institute of Metrology Participated in the drafting. Guangdong Institute of Metrology Shenzhen Digital Technology Development Co. Matussek This specification length measuring geometry commissioned the National Technical Committee is responsible for interpretation The main drafters of this specification. In Jiping (Shenzhen Academy of Metrology and Quality Inspection) Xue Zi (China Institute of Metrology) Miao Huaqing (Shenzhen Academy of Metrology and Quality Inspection) South side home (Shenzhen Academy of Metrology and Quality Inspection) Mao Zhenhua (Zhejiang Institute of Metrology) Drafters participate. Leung even (Guangdong Institute of Metrology) Tang Ning (Mosaic Shenzhen Digital Technology Development Co.)

table of Contents

1 Scope (1) 2. References (1) 3 Terms (1) 4 Overview (2) 5 Metrological characteristics (2) 5.1 Size measurement error (2) 5.2 each cross-section measurement consistency (EC) (3) 5.3 Error detection (3) 5.4 zoom probing error (PZ) (3) 6 calibration conditions (3) Environmental conditions 6.1 (3) 6.2 Operating Conditions (3) 6.3 Configuration measuring system (3) 6.4 standard devices and other equipment (3) 6.5 Other Conditions (3) 7 calibration items and calibration methods (4) 7.1 size measurement calibration error EZ, EXY EV and general requirements (4) 7.2 dimensional measurement error P2D (5) 7.3 (measured in the plane) size measurement error EXY (5) 7.4 vertical dimension measurement error EZ (6) 7.5 each cross-section measurement consistency EC (6) 7.6 Imaging Touch probe error PV (6) 7.7 Imaging probe size measurement error EV (6) 7.8 magnification error detection PZ (6) 8 calibration results expression (7) 9 Recalibration interval (7) Appendix A special steps Regulations Specification (8) Appendix B single, bi-directional approach and a single, two-way and for measuring (10) EXY two dimensions mask alignment method with Appendix C (11) Appendix D measurements Uncertainty about Indication Error of example (12) Image measuring instrument calibration specification

1 Scope

This instruction applies to image measuring instrument Cartesian coordinate system, including in the plane perpendicular to the direction of a Cartesian coordinate system With positioning or measuring function image measuring instrument. 2. References This specification refers to the following documents. JJF 1001 common measurement terms and definitions JJF 1094-2002 measuring instrument characteristics evaluation JJF 1130-2005 geometric measurement equipment calibration Uncertainty Evaluation Guide GB/T 24762-2009 Geometrical product specifications (GPS) image measuring instrument of acceptance and reverification Detect For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 Terms

JJF 1001 defined and the following terms and definitions apply to this specification. 3.1 image detection system imagingprobingsystem Get detection system measuring point by imaging system. 3.2 (image detection system) measurement plane measuringplane (oftheimagingprobingsystem) Two-dimensional plane by the image detection system decisions. 3.3 (measured in-plane) dimension measurement error (EXY) lengthmeasurementerror (inmeasuringplane) And measured in a direction perpendicular to the optical axis of the detection system of indication error of measuring the size of the plane. Note. 1. In the present specification, XY plane parallel to the measuring plane by default, if not, shall be marked accordingly (for example EXZ or EYZ) 2. If only a direction parallel to the X-axis direction or only in a direction parallel to the Y-axis shows the resulting error can be expressed as EX or EY. 3.4 vertical dimension measurement error (EZ) perpendicularlengthmeasurementerror Measured perpendicular to the plane direction indication error size measurement. NOTE. In the present specification, Z-axis is parallel to the default imaging system optical axis and perpendicular to the measurement plane, if not, shall be marked accordingly (Such as EX or EY). 3.5 Imaging probe size measurement error (EV) imagingprobelengthmeasurementerror In the image measuring instrument motion platform and image detection system does not make any movement, the image field of view of the probe range Indication error anywhere within the enclosed size measurement. 3.6 each cross-section measurement consistency (EC) consistencyofmeasurementresultindifferent measuringplane
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1318-2011_English be delivered?

Answer: Upon your order, we will start to translate JJF 1318-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1318-2011_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1318-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJF 1318-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJF 1318-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.