JB/T 20087-2020 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JB/T 20087-2020: Pharmaceutical containers - Tank
Status: Valid

JB/T 20087: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JB/T 20087-2020	189	Add to Cart	3 days	Pharmaceutical containers - Tank	Valid
JB/T 20087-2006	759	Add to Cart	4 days	Pharma contauners. Tank	Obsolete

Similar standards

GB/T 36030   JB/T 20032   JB/T 20104   JB/T 20079   JB/T 20086   JB/T 20080   

Basic data

Standard ID: JB/T 20087-2020 (JB/T20087-2020)
Description (Translated English): Pharmaceutical containers - Tank
Sector / Industry: Mechanical & Machinery Industry Standard (Recommended)
Classification of Chinese Standard: C92
Classification of International Standard: 11.120.30
Word Count Estimation: 8,826
Date of Issue: 2020-08-31
Date of Implementation: 2021-01-01
Older Standard (superseded by this standard): JB/T 20087-2006
Regulation (derived from): Ministry of Industry and Information Technology Announcement No. 37 (2020)
Issuing agency(ies): Ministry of Industry and Information Technology

JB/T 20087-2020: Pharmaceutical containers - Tank

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Medical container) ICS 11.120.30 C92 Record number. 81295-2021 People's Republic of China Machinery Industry Standard Replace JB/T 20087-2006 Medicinal containers and barrels 2020-08-31 released 2021-01-01 implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Table of contents

Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Classification and labeling 1 4 Requirements 2 5 Test method 3 6 Inspection rules 3 7 Marks, instructions for use, packaging, transportation and storage 4

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009, and revised JB/T 20087-2006. This standard replaces JB/T 20087-2006.Compared with JB/T 20087-2006, the main technical changes of this standard are as follows. --- Delete terms and definitions (see Chapter 3 of the.2006 edition); ---Deleted physical and chemical performance requirements and test methods (see.2006 edition 5.2 and 6.2); --- Delete process requirements and test methods (see.2006 edition 5.5 and 6.5); ---Deleting the normative appendix stainless steel acid and hot acid etching test sample sampling and preparation method (see.2006 edition appendix A); --- Delete the informative appendix stainless steel acid and hot acid etching test (see Appendix B of the.2006 edition); --- Delete the informative appendix radiographic flaw detection (see appendix C of the.2006 edition); --- Delete the informative appendix polishing passivation (see appendix D of the.2006 edition); ---Modify the normative references (see Chapter 2,.2006 edition); ---Modify the classification and labeling (see Chapter 3,.2006 edition, Chapter 4); ---Modify materials (see 4.1,.2006 edition 5.4); --- Modify the appearance to surface quality (see 4.2,.2006 edition 5.3); ---Modify the sealing performance (see 4.3.2,.2006 edition 5.1.2); ---Modified material test (see 5.1,.2006 edition 6.4); --- Modify the surface roughness test to the surface quality test (see 5.2,.2006 edition 6.3); --- Modify the performance test to be a performance test (see 5.3,.2006 edition 6.1); ---Modify the factory inspection (see 6.2,.2006 edition 7.1.1); ---Modify type inspection (see 6.3,.2006 edition 7.1.2); ---Modify domestic product packaging (see 7.3.1,.2006 version 9.1.1); ---Modify export product packaging (see 7.3.2,.2006 version 9.1.2); --- Increase the maximum load-bearing quality requirements and tests (see 4.3.3, 5.3.3); --- Increase the actual volume requirements and tests (see 4.4, 5.4). This standard was proposed by the China Pharmaceutical Equipment Industry Association. This standard is under the jurisdiction of the National Pharmaceutical Equipment Standardization Technical Committee (SAC/TC356). This standard was drafted. Zhejiang Canaan Technology Co., Ltd. The main drafters of this standard. Founder, Xie Zhongze, Wu Wutong, Zhou Zhendao, Gu Shi, Huang Yuanyuan. The previous versions of the standard replaced by this standard are as follows. ---JB/T 20087-2006. Medicinal containers and barrels

1 Scope

This standard specifies the classification and marking, requirements, test methods, inspection rules, signs, instructions for use, packaging, and transportation of pharmaceutical containers and barrels. Transmission and storage. This standard applies to stainless steel barrels (hereinafter referred to as Barrel).

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 191 Packaging, storage and transportation pictorial signs GB/T 6388 Transport packaging receiving and dispatching signs The generation of GB/T 10111 random number and its application in product quality sampling inspection GB/T 10610 Product Geometric Technical Specification Surface Structure Profile Method Rules and Methods for Evaluating Surface Structure GB/T 13251-2018 Packaging steel drum closure GB/T 13306 signs GB/T 13384 General technical conditions for packaging of mechanical and electrical products GB/T 19142 General Rules for Export Commodity Packaging

3 Classification and marking

3.1 Classification The barrels are divided into straight barrels and cone barrels according to the shape, as shown in Figure 1. a) Straight barrel body b) Cone barrel body Figure 1 Tank type diagram ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JB/T 20087-2020_English be delivered?

Answer: Upon your order, we will start to translate JB/T 20087-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JB/T 20087-2020_English with my colleagues?

Answer: Yes. The purchased PDF of JB/T 20087-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JB/T 20087-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JB/T 20087-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.