JB/T 20104-2022 (JB/T 20104-2007) PDF EnglishUS$115.00 · In stock · Download in 9 seconds
JB/T 20104-2007: Hardness tester Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Obsolete JB/T 20104: Historical versions
Similar standardsJB/T 20104-2007: Hardness tester---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/JBT20104-2007ICS 11.120.30 C 95 Filing ID. 22188-2007 JB Pharmaceutical Machinery Industry Standard of the People’s Republic of China Hardness tester Issued on: NOVEMBER 14, 2007 Implemented on: MAY 1, 2008 Issued by. National Development and Reform Committee Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 5 4 Marks... 5 5 Requirements... 5 6 Test methods... 7 7 Inspection rules... 9 8 Signs, packaging, transportation and storage... 11ForewordThis Standard is formulated according to "Good manufacture practice of drugs", and standardization working directive requirements of GB/T 1.1-2000 and GB/T 1.2-2002. This Standard is formulated according to the relevant specifications of GB 5226.1-2002 "Safety of machinery - Electrical equipment of machines - Part 1. General requirements" and GB/T 14710 "The environmental requirements and test methods for medical electrical equipment", so as to ensure the performance quality and safety of products. This Standard was proposed by China Pharmaceutical Equipment Industry Association. This Standard shall be administrated by Pharmaceutical Equipment Industry Standardization Technical Committee. Main drafting organization of this Standard. Tianjin Tianda Tianfa Technology Co., Ltd.. Main drafters of this Standard. Gao Yucheng, Su Lin, Wang Zhaowu, Luo Shijin, and Ye Hongyu. Hardness tester1 ScopeThis Standard specifies the terms and definitions, marks, requirements, test methods, inspection rules and signs, packaging, transportation and storage of hardness tester. This Standard applies to the motor-driven digital display instruments used to measure the hardness of pharmaceutical tablets (hereinafter referred to as hardness tester).2 Normative referencesThe provisions in following documents become the provisions of this Standard through reference in this Standard. For dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB/T 191 Packaging - Pictorial marking for handling of goods GB 5226.1-2002 Safety of machinery - Electrical equipment of machines - Part 1.General requirements GB/T 6388 Transport package shipping mark GB/T 13306 Plates GB/T 13384 General specifications for packing of mechanical and electrical product GB/T 14710 The environmental requirements and test methods for medical electrical equipment YY/T 0216 Editorial nominating method for the model designation of pharmaceutical machinery8 Signs, packaging, transportation and storage8.1 Signs 8.1.1 The plates shall comply with the specifications of GB/T 13306.The contents of plates are as follows. a) Name of manufacturer; b) Product name and model; c) Trademark; d) Production serial number and date; e) Power supply voltage and maximum power; f) Implemented standard ID. 8.1.2 Pictorial signs of packaging, storage and transportation shall comply with the specifications of GB/T 191.There shall be signs such as "Fragile", "Keep-up", "Keep dry", "No rolling". 8.1.3 Signs of transportation and shipping shall comply with the specifications of GB/T 6388. 8.2 Packaging 8.2.1 The packaging of products shall comply with the specifications of GB/T 13384. 8.2.2 The following documents shall be within the package of tester. a) Product certificate; b) Product instructions; c) Packing list; d) Other documents (such as supporting documents to the instrument). 8.3 Transportation Transportation is according to the specifications of order contract. The hardness testers shall be firmly fixed on the transport means during transportation. Tumbling is forbidden. 8.4 Storage After packaged, hardness tester shall be stored in dry, ventilated, no-corrosive-gas indoor place. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. |
