JB/T 20022-2017 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JB/T 20022-2017: Punch and die for ZP series tablet press
Status: Valid

JB/T 20022: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
JB/T 20022-2017	259	Add to Cart	3 days	Punch and die for ZP series tablet press	Valid
JB 20022-2004	359	Add to Cart	3 days	[JB/T 20022-2004] Punch and die for tablet press	Obsolete

Similar standards

GB/T 36030   JB/T 20032   JB/T 20104   JB/T 20028   JB/T 20013   JB/T 20023   

Basic data

Standard ID: JB/T 20022-2017 (JB/T20022-2017)
Description (Translated English): Punch and die for ZP series tablet press
Sector / Industry: Mechanical & Machinery Industry Standard (Recommended)
Classification of Chinese Standard: C92
Word Count Estimation: 11,132
Date of Issue: 2017-04-12
Date of Implementation: 2017-10-01
Older Standard (superseded by this standard): JB 20022-2004
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the terms and definitions, markings, requirements, test methods, inspection rules, packaging and storage of ZP series tablet presses.

JB/T 20022-2017: Punch and die for ZP series tablet press

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(ZP series tablet press pills die) ICS 11.120.30 C92 Filing number .58595-2017 People's Republic of China pharmaceutical machinery industry standards Replacing JB 20022-2004 ZP series tablet press tablets die 2017-04-12 released 2017-10-01 implementation Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard is in accordance with GB/T 1.1-2009 "Standardization Guide Part 1. Standard structure and preparation" and GB/T.20001.10-2014 "Standard Writing Rules Part 10. Product Standards" rules given drafting. To JB 20022-2004 "Tablet press die" to be revised. This standard instead of JB 20022-2004 "tablets tablet die", compared with JB 20022-2004, in addition to editorial changes, the main Technical changes are as follows. --- Standard name was changed to "ZP series Tablet Press Punch"; --- Prescribed ZP series tablet tablets die term and definition (see Chapter 3); --- Increase the die mark function code and specification code (see 4.2); --- Modify Table 1 "punch diameter, sheet surface size series table" (see Table 1 of.2004), and as a normative appendix; --- Removed Table 2 "dimensional tolerances" (see Table.2004 version 2); --- Modify and increase the die view, and marked the necessary dimensions and tolerances; --- Modify the requirements of the sheet surface (see 5.5); --- Test methods according to JB/T 20080.3-2007 Chapter 4 (see 6.2); --- Modify the sampling method of die inspection (see Table 2). This standard proposed by the China Pharmaceutical Equipment Industry Association. This standard by the National Pharmaceutical Equipment Standardization Technical Committee (SAC/TC356) centralized. This standard was drafted unit. Shanghai Tianxiang · Jian Tai Pharmaceutical Machinery Co., Ltd., Shanghai Qianshan Far East Pharmaceutical Machinery Co., Ltd. The main drafters of this standard. Tang Jun, Gao Yunwei, Chen Luzhen, Li Huaqiang. This standard replaces the standards previously issued as. --- GB 12253-1990 (Note. The standard by the original State Technical Supervision in.1992. "National Standard clean-up notice (a)" In the announcement, adjusted to industry standards); --- JB 20022-2004. ZP series tablet press tablets die

1 Scope

This standard specifies the terms and definitions, labels, requirements, test methods, inspection rules, packaging and Storage. This standard applies to ZP series tablets tablet die (hereinafter referred to as "Die").

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1184 shape and location tolerances are not tolerance values GB/T 1800.2 Geometrical Product Specifications (GPS) Limits and Matching Part 2. Standard Tolerance Levels and Bore and Shaft Limit Deviation Bad table GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances GB/T 2828.1-2003 Sampling procedures for sampling inspection - Part 1. Batch-by-lot inspection sampling by reception quality limit (AQL) plan GB/T 13384 mechanical and electrical product packaging General technical conditions JB/T 20080.1-2006 high speed tabletting die (T series) size and shape High speed tabletting die - Inspection

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Punching punchanddie On the red bar, under the punch and the mold collectively. see picture 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JB/T 20022-2017_English be delivered?

Answer: Upon your order, we will start to translate JB/T 20022-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JB/T 20022-2017_English with my colleagues?

Answer: Yes. The purchased PDF of JB/T 20022-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JB/T 20022-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JB/T 20022-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.