HYT154-2013 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. HYT154-2013: Technical data requirement of delimitation of continental shelf and exclusive economic zone Status: Valid
Basic dataStandard ID: HY/T 154-2013 (HY/T154-2013)Description (Translated English): Technical data requirement of delimitation of continental shelf and exclusive economic zone Sector / Industry: Marine Industry Standard (Recommended) Classification of Chinese Standard: A45 Classification of International Standard: 07.060 Word Count Estimation: 9,953 Quoted Standard: GB/T 12763.8; GB/T 12763.10; Regulation (derived from): Industry standard filing Notice 2013 No. 8 (No. 164 overall) Issuing agency(ies): State Oceanic Administration Summary: This standard specifies: the delimitation of the continental shelf and exclusive economic zone involved Technical information type, requirements, and archiving. This standard applies to: the demarcation of the continental shelf and exclusive economic zone HYT154-2013: Technical data requirement of delimitation of continental shelf and exclusive economic zone---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical data requirement of delimitation of continental shelf and exclusive economic zone ICS 07.060 A45 People's Republic of China Marine Industry Standard Technical data requirements for the delimitation of the continental shelf and the exclusive economic zone Released on.2013-04-25 2013-05-01 Implementation Issued by the State Oceanic Administration ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the National Oceanic Standards and Metrology Center. This standard is under the jurisdiction of the National Marine Standardization Technical Committee (SAC/TC283). This standard was drafted by. National Oceanic Standards and Metrology Center, Second Institute of Oceanography, State Oceanic Administration. The main drafters of this standard. Yao Yong, Fang Yinxia, Xu Lili, Liming Bi, Guo Xiaoyong, Tang Yujing, Li Fang, Tang Hairong. Technical data requirements for the delimitation of the continental shelf and the exclusive economic zone1 ScopeThis standard specifies the types, requirements and filing of technical data involved in the demarcation of the continental shelf and the exclusive economic zone. This standard applies to the demarcation of the continental shelf and the exclusive economic zone.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 12763.8 Specification for Marine Survey Part 8.Marine Geology and Geophysical Survey GB/T 12763.10 Marine Survey Specification Part 10.Submarine Topography and Geomorphology Survey3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Continentalshelf The territorial waters of coastal states extend to the seabed and subsoil of the seabed area on the outer edge of the continent based on the natural extension of their land territories. Note. If the distance from the baseline measurement of the width of the territorial sea to the outer edge of the continental edge is less than.200nmile, it will be extended to a distance of.200nmile. 3.2 Exclusive economic zone The area outside and adjacent to the territorial sea of a coastal State shall not exceed.200 nm from the baseline for measuring the width of the territorial sea. 3.3 Footofthecontinentalslope The point where the gradient of the bottom of the continental slope changes the most. 3.4 Baselineofterritorialsea The inner boundary line used to measure the width of the territorial sea given by the prescribed method. [GB/T 15918-2010, definition 5.1.16] 3.5 Territorial seabasepoint Each point at the turning point of the straight baseline formed by delimiting the territorial sea baseline using the straight baseline method. [GB/T 15918-2010, definition 5.1.15] 3.6 Evidence to the contrary When the topographical and morphological evidence at the point where the slope changes the most is insufficient or cannot be reliably determined And geophysical evidence to determine the location of the foot of the continental slope. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HYT154-2013_English be delivered?Answer: Upon your order, we will start to translate HYT154-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HYT154-2013_English with my colleagues?Answer: Yes. The purchased PDF of HYT154-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
