HYT105-2008 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. HYT105-2008: Hollow fiber membrane separator of N2-H2 Status: Valid
Basic dataStandard ID: HY/T 105-2008 (HY/T105-2008)Description (Translated English): Hollow fiber membrane separator of N2-H2 Sector / Industry: Marine Industry Standard (Recommended) Classification of Chinese Standard: A45 Classification of International Standard: 07.060; 67.160 Word Count Estimation: 8,852 Date of Issue: 3/4/2008 Date of Implementation: 4/1/2008 Quoted Standard: GB 9969.1-1998; GB/T 14436-1993; GB/T 9174-1988 Issuing agency(ies): State Oceanic Administration Summary: This standard specifies the hollow fiber membrane separator N2-H2 (hereinafter referred to as separator) classification and models, requirements, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to the hollow fiber membrane separator N2-H2 production and testing. HYT105-2008: Hollow fiber membrane separator of N2-H2---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Hollow fiber membrane separator of N2-H2 ICS 07.060; 67.160 A45 People's Republic of China Marine Industry Standard HY/T 105-2008 Hollow fiber membrane N2-H2 separator 2008-03-04 released Implementation of.2008-04-01 Issued by the State Oceanic Administration ForewordAppendix A of this standard is a normative appendix. This standard was proposed by China Membrane Industry Association. This standard is under the jurisdiction of the National Marine Standardization Technical Committee (SAC/TC283). Drafting organizations of this standard. Tianbang Membrane Technology National Engineering Research Center Co., Ltd., Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Drafters of this standard. Chen Yong, Yu Feng, Yang Dan, Zhao Yong, Wang Conghou, Cao Yiming. HY/T 105-2008 Hollow fiber membrane N2-H2 separator1 scopeThis standard specifies the classification and model, requirements, test methods, and inspection regulations of hollow fiber membrane N2-H2 separators (hereinafter referred to as separators) Rules and signs, packaging, transportation and storage. This standard applies to the production and inspection of hollow fiber membrane N2-H2 separators.2 Normative referencesThe clauses in the following documents become clauses of this standard after being quoted. For dated reference documents, all subsequent The amendments (not including errata content) or revisions do not apply to this standard. However, all parties that reach an agreement based on this standard are encouraged to study Investigate whether the latest version of these documents can be used. For undated reference documents, the latest version applies to this standard. GB/T 9174-1988 General technical conditions for general cargo transportation packaging GB 9699.1-1998 General Rules for the Use of Industrial Products GB/T 14436-1993 General Rules of Guarantee Documents for Industrial Products3 Terms and definitionsThe following terms and definitions apply to this standard. The ratio of the permeability of different pure gases is expressed as a value.4 Classification and model4.1 Classification 4.1.1 The separator is classified according to the apparent separation coefficient (α value) of the membrane, and is divided into five grades. 100, 60, 40, 20, and 10. 4.1.2 Separator is classified according to the design pressure level, divided into. 32MPa, 22MPa, 16MPa, 10MPa, 6.4MPa, 1.6MPa six Level type. 4.1.3 The separators are classified according to the diameter of the membrane elements and are divided into three grades. 50mm, 100mm, and 200mm. 4.2 Model The model of the separator consists of five parts. category code, type code, membrane element diameter, pressure rating and apparent separation coefficient. The number and type code are represented by the first capital letter of the corresponding English word. NH N2-H2 separator (category code ) HF Hollow fiber membrane (type code ) Diameter of membrane element (mm) Design pressure level (MPa Apparent separation coefficient (α value) Example. Gas separator NH-HF-100-16-40.refers to the diameter of the membrane element 100mm, the separator design pressure level is 16MPa, and the apparent separation coefficient (α value) is equal to 40 The hollow fiber membrane N2-H2 separator. HY/T 105-2008 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HYT105-2008_English be delivered?Answer: Upon your order, we will start to translate HYT105-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HYT105-2008_English with my colleagues?Answer: Yes. The purchased PDF of HYT105-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
