HYT061-2017 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
HYT061-2017: Hollow fiber microfiltration membrane module
Status: Valid

HYT061: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
HY/T 061-2017	279	Add to Cart	3 days	Hollow fiber microfiltration membrane module	Valid
HY/T 061-2002	319	Add to Cart	3 days	Hollow fiber microfiltration membrane module	Obsolete

Similar standards

GB/T 33673   DZ/T 0175   HY/T 094   HY/T 074   HY/T 047   

Basic data

Standard ID: HY/T 061-2017 (HY/T061-2017)
Description (Translated English): Hollow fiber microfiltration membrane module
Sector / Industry: Marine Industry Standard (Recommended)
Classification of Chinese Standard: A45
Classification of International Standard: 07.060; 67.260
Word Count Estimation: 12,141
Date of Issue: 2017-02-21
Date of Implementation: 2017-06-01
Older Standard (superseded by this standard): HY/T 061-2002
Quoted Standard: GB/T 191; GB/T 2828.1; GB/T 5750.4-2006; GB/T 6682; GB/T 9174; GB/T 9969; GB/T 14436; GB 17378.4-2007; GB/T 20103-2006; HY/T 112-2008; DL/T 588
Issuing agency(ies): State Oceanic Administration
Summary: This standard specifies the requirements, test methods, inspection rules and marking, packaging, transport and storage of shell and shellless hollow fiber microfiltration membrane modules. This standard is applicable to the research, production, use and management of shell and shellless hollow fiber microfiltration membrane modules.

HYT061-2017: Hollow fiber microfiltration membrane module

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hollow fiber microfiltration membrane module ICS 07.060;67.260 A45 People's Republic of China Marine Industry Standard Replace HY/T 061-2002 Hollow fiber microfiltration membrane module 2017-02-21 released 2017-06-01 Implementation Issued by the State Oceanic Administration

Table of contents

Preface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Requirements 2 5 Detection method 3 6 Inspection rules 5 7 Marking, packaging, transportation and storage 6 Appendix A (Normative Appendix) Integrity testing device for shellless hollow fiber microfiltration membrane modules 7 Appendix B (Normative Appendix) Shell-type hollow fiber microfiltration membrane module flux detection device 8 Appendix C (Normative appendix) Caseless hollow fiber microfiltration membrane module flux detection device 9

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces HY/T 061-2002 "Hollow fiber microfiltration membrane module", compared with HY/T 061-2002, except for editorial changes The main technical changes are as follows. ---Revised the two definitions of "microfiltration" and "pure water flux" (see 3.1 and 3.4, 3.1 and 3.2 of the.2002 edition); --- Deleted the two definitions of "initial bubble point pressure" and "membrane pore size" (see 3.3 and 3.4 in the.2002 edition); --- Added "shell hollow fiber membrane module", "shellless hollow fiber membrane module", "transmembrane pressure difference", "water production", "turbidity", and "silt density" There are 7 definitions of "degree index" and "suspended solids" (see 3.2, 3.3, 3.5, 3.6, 3.7, 3.8 and 3.9); --- Deleted classification and model (see Chapter 4 of the.2002 edition); ---Delete the content that is not related to the main performance requirements of the membrane module in the "basic requirements" and "technical requirements", and amend it to "appearance" and "complete" 4 requirements (see 4.1, 4.2, 4.3 and 4.4, 5.1 and 5.2 of the.2002 edition); --- Deleted the "appearance", "leakage", "pure water flux" and "initial bubble point pressure sum" of the membrane filament in the reference HY/T 051 test method Membrane pore size calculation" 4 test methods (see 6.1, 6.2, 6.3 and 6.4 of the.2002 edition); ---Added 4 testing methods for the hollow fiber microfiltration membrane module. "Appearance", "Integrity", "Flux" and "Water Quality" (See 5.1, 5.2, 5.3 and 5.4); ---Modified the type inspection method and judgment rules (see 6.4.2 and 6.5, 7.2.4 of the.2002 edition); ---Added the parameters that should be included in the instruction manual (see 7.2.2.2); ---Modified the requirements for transportation and storage (see 7.3 and 7.4, 8.3 and 8.4 in the.2002 edition); --- Deleted the hollow fiber microfiltration membrane module specifications and reference materials (see Appendix A and Appendix B of the.2002 edition); ---Added the schematic diagram of the integrity detection device and the flux detection device (see Appendix A, Appendix B and Appendix C). This standard was proposed and managed by the National Marine Standardization Technical Committee (SAC/TC283). Drafting organizations of this standard. Tianjin Motianme Technology Co., Ltd., Tianjin Seawater Desalination and Comprehensive Utilization Institute of the State Oceanic Administration, Shanxi Dongzhao Jinmotian Co., Ltd., Beijing Bishuiyuan Membrane Technology Co., Ltd., Sanda Membrane Technology (Xiamen) Co., Ltd., Tianbang Membrane Technology National Engineering Research Center Co., Ltd., Tianjin Motianme Engineering Technology Co., Ltd., Zhejiang Dongda Environmental Engineering Co., Ltd., Hainan Lishengjing Water Technology Industrial Co., Ltd., East China University of Science and Technology, Hangzhou Qiushi Membrane Technology Co., Ltd., Hangzhou Tianchuang Environmental Technology Co., Ltd. The main drafters of this standard. Tang Xiaoshan, Pan Xianhui, Wang Leyi, Liu Mingxuan, Hong Yubin, Xu Yuyu, Zhao Ying, Wu Yier, Chen Qing, Xu Zhenliang, Zhang Xingxing, Ding Guoliang, Zhang Benshan, Wang Xuliang, Liu Chunqiao, Dai Pan, Xu Ya, Yang Hu, Hong Haiyun, Zhao Jingwei, Yang Yan. The previous versions of the standard replaced by this standard are as follows. ---HY/T 061-2002. Hollow fiber microfiltration membrane module

1 Scope

This standard specifies the requirements, testing methods, inspection rules and markings, packaging, transportation, and packaging of shell-type and shell-less hollow fiber microfiltration membrane modules. Store. This standard applies to the scientific research, production, use and management of shell-type and shell-less hollow fiber microfiltration membrane modules.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 191 Packaging, Storage and Transportation Graphic Mark GB/T 2828.1 Sampling inspection procedure by attributes Part 1.Batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 5750.4-2006 Standard Test Method for Drinking Water Sensory Characteristics and Physical Index GB/T 6682 Analytical laboratory water specifications and test methods GB/T 9174 General technical requirements for general cargo transportation packaging GB/T 9969 General Rules for the Use of Industrial Products GB/T 14436 General Rules of Guarantee Documents for Industrial Products GB 17378.4-2007 Marine Monitoring Specification Part 4.Seawater Analysis GB/T.20103-2006 Membrane separation technical terms HY/T 112-2008 ultrafiltration membrane and its components DL/T 588 Water Pollution Index Determination

3 Terms and definitions

The following terms and definitions defined in GB/T.20103-2006 apply to this document. For ease of use, the following is repeated Some terms and definitions in GB/T.20103-2006. 3.1 Microfiltration, MF The process of separating particles from 0.01 μm to several μm with pressure as the driving force. [GB/T.20103-2006, definition 5.2.2] 3.2 Shell type hollow fiber membrane module sheledholowfibermembranemodule It is a hollow fiber membrane module that is casted by hollow fiber membranes, closed shells and end-capped resin, and is filtered by positive pressure. 3.3 Shellless hollow fiber membrane module shel-freeholowfibermembranemodule An open hollow fiber membrane module made of hollow fiber membranes and capped resins, and filtered through negative pressure suction. 3.4 Flux The amount of permeable component per unit time per unit membrane area. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of HYT061-2017_English be delivered?

Answer: Upon your order, we will start to translate HYT061-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of HYT061-2017_English with my colleagues?

Answer: Yes. The purchased PDF of HYT061-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version HYT061-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version HYT061-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.