HJ 1123-2020 English PDFUS$1589.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. HJ 1123-2020: Technical specification for application and issuance of pollutant permit - Footwear manufacturing industry Status: Valid
Basic dataStandard ID: HJ 1123-2020 (HJ1123-2020)Description (Translated English): Technical specification for application and issuance of pollutant permit - Footwear manufacturing industry Sector / Industry: Environmental Protection Industry Standard Word Count Estimation: 69,665 Date of Issue: 2020-03-27 Date of Implementation: 2020-03-27 Issuing agency(ies): Ministry of Ecology and Environment HJ 1123-2020: Technical specification for application and issuance of pollutant permit - Footwear manufacturing industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical specification for application and issuance of pollutant permit - Footwear manufacturing industry National Environmental Protection Standards of the People's Republic of China Pollution Discharge Permit Application and Issuance of Technical Regulations for Shoemaking Industry 2020-03-27 release 2020-03-27 Implementation Issued by the Ministry of Ecology and Environment Table of contentsForeword...II 1 Scope of application...1 2 Normative references...1 3 Terms and definitions...2 4 Key pollution management units...4 4.1 Requirements for the declaration of the basic situation of the pollutant discharge unit...4 4.2 Corresponding discharge outlets in the production and discharge process and methods for determining permitted discharge limits...14 4.3 Feasible technical requirements for pollution prevention...16 4.4 Self-monitoring management requirements...18 4.5 Environmental management ledger record requirements...20 4.6 Requirements for the preparation of pollution discharge permit execution report...21 4.7 Accounting method of actual emissions...21 4.8 Compliance Judgment Method...22 5 Simplify management of sewage units...24 5.1 Requirements for reporting the basic situation of pollutant discharge units...24 5.2 Corresponding discharge outlets in the production and discharge process and the determination method of the permitted discharge limit...33 5.3 Feasible technical requirements for pollution prevention...35 5.4 Self-monitoring management requirements...36 5.5 Environmental management ledger record requirements...38 5.6 Requirements for preparation of implementation report of pollution discharge permit...39 5.7 Accounting method of actual emissions...40 5.8 Compliance Judgment Method...40 Appendix A (informative appendix) Environmental management ledger record reference table (key management pollutant discharge unit)...42 Appendix B (informative appendix) Environmental management ledger record reference table (simplified management of pollutant discharge units)...42 Appendix C (informative appendix) Form of annual report on pollutant discharge permit (key management pollutant discharge unit)..50 Appendix D (informative appendix) Form of annual report on the implementation of pollutant discharge permit (simplified management of pollutant discharge units).56 Appendix E (informative appendix) Recommended formula for calculating volatile organic compound emissions...62 Appendix F (Informative Appendix) Reference Table of Available Technologies for Waste Gas and Wastewater Pollution Control...65ForewordIn order to implement the "Environmental Protection Law of the People's Republic of China", "The Air Pollution Prevention Law of the People's Republic of China", "China The Water Pollution Prevention and Control Law of the People’s Republic of China, the Soil Pollution Prevention and Control Law of the People’s Republic of China and other laws and regulations, the Office of the State Council Department’s Notice on Printing and Distributing the Implementation Plan for the Control of Pollutant Discharge Permit System (Guobanfa [2016] No. 81) and the "Pollution Permit Manageable Measures (for Trial Implementation)" (Ministry of Environmental Protection Order No. 48) to improve the technical support system for pollutant discharge permits, guidance and regulations This standard is formulated for the application and issuance of pollutant discharge permits by the footwear industry pollutant discharge units. This standard specifies the basic requirements for the application and issuance of a pollutant discharge permit for the footwear industry. Methods for determining limit values and compliance judgments, as well as environmental management such as self-monitoring, environmental management ledgers and implementation reports of pollution permits Management requirements, and proposed reference requirements for feasible technologies for pollution prevention and control of sewage units in the shoe industry. Appendices A to F of this standard are all informative appendices. This standard is issued for the first time. This standard is formulated by the Department of Environmental Impact Assessment and Emission Management and the Department of Regulations and Standards of the Ministry of Ecology and Environment. The main drafting units of this standard. China Leather Association, China Light Industry Cleaner Production Center, Fujian Jinhuang Environmental Technology Limited company. This standard was approved by the Ministry of Ecology and Environment on March 27, 2020. This standard will be implemented on March 27, 2020. This standard is interpreted by the Ministry of Ecology and Environment. Pollution Discharge Permit Application and Issuance of Technical Regulations for Shoemaking Industry1 Scope of applicationThis standard specifies the basic requirements for the application and issuance of a pollutant discharge permit for the footwear industry. Methods for determining limit values and compliance judgments, as well as environmental management such as self-monitoring, environmental management ledgers and implementation reports of pollution permits Management requirements, and proposed reference requirements for feasible technologies for pollution prevention and control of sewage units in the shoe industry. This standard is applicable to guide the footwear industry pollutant discharge units to fill in the relevant application letter on the national pollution discharge permit management information platform Information, applicable to the guidance of the approval authority for the issuance of pollution permits to review and determine the requirements for permits for sewage disposal units in the footwear industry. This standard is applicable to the management of permits for the discharge of air pollutants and water pollutants discharged by sewage units in the shoe industry. Shoemaker Among the industrial pollutants, the production facilities and discharge outlets that implement the "Boiler Air Pollutant Emission Standard" (GB 13271) It is used in "Boiler Boiler Specification for Boiler Discharge Permit Application and Issuance" (HJ 953). Shoemaking industry sewage bills that are not specified in this standard but discharge industrial waste gas, wastewater or toxic and harmful pollutants specified by the state For other production facilities and discharge outlets, refer to the "General Rules for the Application and Issuance of Pollution Permits" (HJ 942). The relevant requirements for the operation and management of solid waste will be fixed in the “Environmental Pollution Prevention Law of the People’s Republic of China” The waste will be implemented after being included in the discharge permit management.2 Normative referencesThe content of this standard refers to the following documents or their clauses. For undated references, the effective version is suitable Used in this standard. GB 8978 Integrated Wastewater Discharge Standard GB 13271 Boiler Air Pollutant Emission Standard GB 14554 Emission Standard of Odor Pollutants GB 16297 Comprehensive Emission Standard of Air Pollutants GB 16758 Classification and technical conditions of exhaust hoods GB 18597 Pollution Control Standard for Hazardous Waste Storage GB 18599 General industrial solid waste storage and disposal site pollution control standards GB 19340 Adhesives for shoes and bags GB 27632 Emission Standard of Pollutants for Rubber Products Industry GB 31572 Pollutant Emission Standard for Synthetic Resin Industry GB 37822 Unorganized emission control standard of volatile organic compounds Emission Standard of Air Pollutants for Leather Products and Footwear Industry GB/T 4754 Classification of National Economic Industries GB/T 16157 Determination of particulate matter in exhaust from stationary sources and sampling method for gaseous pollutants GB/T 16758 Classification and technical conditions of exhaust hoods HJ 38 Determination of total hydrocarbons, methane and non-methane total hydrocarbons in stationary pollution sources gas chromatography HJ 75 Technical Specification for Continuous Monitoring of Smoke (SO2, NOx, Particulate Matter) Emissions from Stationary Pollution Sources HJ 91.1 Technical Specification for Wastewater Monitoring HJ 494 Technical Guide for Water Quality Sampling HJ 495 Technical Regulations for Water Quality Sampling Scheme Design HJ 521 Wastewater Discharge Law Code (Trial) HJ 608 Code Rules for Pollutant Discharge Units HJ 819 General Rules of Technical Guidelines for Self-monitoring of Pollutant Discharge Unit HJ 820 Technical Guide for Self-monitoring of Sewage Discharge Units Thermal Power and Boilers HJ 942 General Rules of Technical Specifications for Pollution Discharge Permit Application and Issuance HJ 944 General Rules of Technical Specifications for Environmental Management Ledger and Pollution Discharge Permit Implementation Report of Pollutant Discharge Units (Trial) HJ 953 Sewage discharge permit application and issuance of technical specifications for boilers HJ 1013 Technical requirements and testing methods for continuous monitoring system of non-methane hydrocarbons in waste gas from stationary sources HJ/T 55 Technical Guidelines for Monitoring Unorganized Emissions of Air Pollutants HJ/T 91 Technical specification for surface water and sewage monitoring HJ/T 353 Water Pollution Source Online Monitoring System Installation Technical Specification (Trial) HJ/T 354 Technical Specification for Acceptance of Online Water Pollution Source Monitoring System (Trial) HJ/T 355 Water Pollution Source Online Monitoring System Operation and Assessment Technical Specification (Trial) HJ/T 356 Technical Specification for Data Validity Judgment of Online Water Pollution Source Monitoring System (Trial) HJ/T 373 Fixed pollution source monitoring quality assurance and quality control technical specifications (trial implementation) HJ/T 397 Fixed source exhaust gas monitoring technical specification AQ/T 4274 Technical specification for wind speed detection and evaluation of local exhaust facilities control "Notice of the State Council on Printing and Distributing the Three-Year Action Plan for Winning the Blue Sky Defense War" (Guo Fa [2018] No. 22) "Administrative Measures for the Transfer of Hazardous Wastes" (Order No. 5 of the State Environmental Protection Administration) "National Hazardous Waste List" (Order No. 39 of the Ministry of Environmental Protection) "Administrative Measures for Pollution Discharge Permits (Trial)" (Ministry of Environmental Protection Order No. 48) "List of Classification Management of Discharge Permits for Fixed Pollution Sources" "Announcement on the Implementation of Special Emission Limits for Air Pollutants" (Announcement No. 14 of.2013 by the Ministry of Environmental Protection) "Announcement on the Implementation of Special Emission Limits for Air Pollutants in Beijing-Tianjin-Hebei Air Pollution Transmission Channel Cities" (Environmental Protection Ministry Announcement No. 9 of.2018) "Technical Requirements for Standardized Remediation of Sewage Outlets (Trial)" (Environmental Supervision [1996] No. 470) "Administrative Measures for the Operation of Automatic Monitoring Facilities for Pollution Sources" (Huanfa [2008] No. 6) "Reply to Issues Concerning the Implementation of Special Emission Limits for Air Pollutants" (Huanban Qiqihan [2016] No. 1087)3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 footwear manufacturing industry Refers to the production activities of textile fabric shoes, leather shoes, plastic shoes, rubber shoes and other various shoes, corresponding to GB/T 4754-2017 The national economic industry code is C195. 3.2 Pollutant emission unit of footwear manufacturing industry Refers to the use of cold bonding process, vulcanization process, injection molding process, molding process, seam process and other production processes for textile Sewage discharge units or production facilities for the production of fabric shoes, leather shoes, plastic shoes, rubber shoes and various other shoes. 3.3 Key pollutant emission unit Refers to the pollutant discharge units that are included in the "List of Classified Management of Permits for Discharge of Fixed Pollution Sources". 3.4 Simplified pollutant emission unit Refers to the pollutant discharge units that are included in the "List of Classification Management of Permits for Discharge of Fixed Pollution Sources" to simplify management. 3.5 Volatile organic compounds (VOCs) Refers to organic compounds that participate in atmospheric photochemical reactions, or organic compounds determined in accordance with relevant regulations. This standard uses non-methane total hydrocarbons as a comprehensive control index for volatile organic emissions. Waiting for "Leather Products and Shoemakers After the release and implementation of the Industrial Air Pollutant Emission Standard, its regulations shall be followed. Where local pollutant discharge standards have stricter requirements, follow their regulations. 3.6 Gaseous non-methane hydrocarbons (NMHC) Refers to the sum of gaseous organic compounds other than methane that the hydrogen flame ionization detector responds by using the prescribed detection method, Calculated by the mass concentration of carbon. 3.7 fugitive emission Refers to the irregular discharge of atmospheric pollutants without passing through the exhaust tube, including the escape of open workplaces, and through gaps, The discharge of vents, open doors and windows and similar openings (holes), etc. 3.8 permitted emission limits Refers to the maximum discharge concentration (or rate) and discharge volume of pollutants permitted by the pollutant discharge unit as specified in the pollution discharge permit. 3.9 special periods Refers to the environmental quality compliance plan established by the local people’s government in accordance with the law or other relevant environmental management documents. The pollutant discharge of pollutants has special requirements for the time period, including the response period of heavy pollution weather and the winter prevention period. 3.10 abnormal situation Refers to abnormal operating conditions or pollution control facilities of production facilities such as starting and stopping the furnace (machine), equipment maintenance, abnormal operation of process equipment, etc. Abnormal condition.4 Key management pollutant discharge units4.1 Requirements for the declaration of the basic situation of pollutants 4.1.1 General principles The pollutant discharge unit shall fill in the corresponding information in the national pollutant discharge permit management information platform application system in accordance with the requirements of this standard. Those that are not included in the reporting system, are required by the local ecological and environmental authorities, or the pollutant discharge unit considers that they need to be reported. Add content by yourself. Local ecological and environmental authorities at or above the municipal level with districts may increase the The content specified in the permit, and fill in the “local health authority with the right to issue” in the declaration system of the national pollution discharge permit management information platform Management content added by the environmental and environmental authorities" column. The basic information of the pollutant discharging unit shall be filled in according to the actual situation, and shall be legally responsible for the authenticity, legality and completeness of the submitted application materials. 4.1.2 Basic information of pollutant discharge units The basic information of the pollutant discharge unit should be filled in with the name of the unit, whether it needs to be corrected, the category of pollution discharge permit management, postal code, Type of industry, whether to start production and the date of start Key atmospheric control areas, total phosphorus and total nitrogen control areas, etc.), whether it is located in an industrial park and its name, environmental impact Approval document number (recording number), local government’s identification of illegal projects or document number, key pollution Document number of total particulate matter distribution plan, total particulate matter indicator (t/a), total sulfur dioxide indicator (t/a), volatile organic The total quantity index (t/a), the total quantity index of other pollutants involved, etc. When filling in the “Pollutant Discharge Permit Management Category” on the basic information form of the pollutant discharging unit, the "Can be classified management list" to fill in. When filling in the “industry category” on the national pollution discharge permit management information platform, the pollutant discharge unit shall comply with GB/T 4754-2017 Select "Shoe Manufacturing (National Economic Industry Code C195)" in "Shoemaking Industry (National Economic Industry Code C195)", Leather shoe manufacturing (national economic industry code C1952), plastic shoe manufacturing (national economic industry code C1953), rubber shoes Manufacturing (National Economic Industry Code C1954), Other Footwear Industry (National Economic Industry Code C1959)". 4.1.3 Main products and production capacity 4.1.3.1 General principles When reporting “main products and production capacity”, the pollutant discharge unit shall report the main production unit, production process, main production facilities, Facility number, facility parameters, product name, production capacity and unit of measurement, design year production time and other options, etc. If there is a boiler in the public unit, the boiler information should be reported according to HJ 953. The following "4.1.3.2~4.1.3.6" are required items, and "4.1.3.7" are optional items. 4.1.3.2 Main production units, main production processes, production facilities and facility parameters The main production units of the sewage unit are divided into cold bonding process units, vulcanization process units, injection molding process units, and molding process units. Yuan, seam process unit. The main production processes include shoe material cutting process, upper sole production process, upper sole assembly process, and shoe Finishing and packaging process. The main production units, production processes and production facility parameters are shown in Table 1. 4.1.3.3 Number of main production facilities The pollutant discharge unit shall fill in the internal production facility number. If the pollutant discharge unit does not have the internal production facility number, it shall be entered according to HJ 608. Line number and fill in. 4.1.3.4 Product name The product name of the sewage disposal unit is divided into textile fabric shoes, leather shoes, plastic shoes, rubber shoes, and other shoes. 4.1.3.5 Production capacity and measurement unit The production capacity of the pollutant discharge unit is the designed capacity of the main product, excluding the state or local Joint production capacity. If there is no design capacity data, it is calculated based on the average actual output of the past three years. For those that have been put into operation for one year but less than three years The maximum v......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 1123-2020_English be delivered?Answer: Upon your order, we will start to translate HJ 1123-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of HJ 1123-2020_English with my colleagues?Answer: Yes. The purchased PDF of HJ 1123-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
