GBZ30249-2013 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ30249-2013: Safety requirements for electrical equipment for measurement, control, and laboratory use -- Protocol for the preparation of conformity verification reports for the GB 4793 series
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/Z 30249-2013	279	Add to Cart	3 days	Safety requirements for electrical equipment for measurement, control, and laboratory use -- Protocol for the preparation of conformity verification reports for the GB 4793 series	Valid

Similar standards

GB/T 42125.14   GB 4793.9   GB 4793.6   GB/T 42125.2   GB/T 42125.3   GB/T 42125.18   

Basic data

Standard ID: GB/Z 30249-2013 (GB/Z30249-2013)
Description (Translated English): Safety requirements for electrical equipment for measurement, control, and laboratory use -- Protocol for the preparation of conformity verification reports for the GB 4793 series
Sector / Industry: National Standard
Classification of Chinese Standard: N09
Classification of International Standard: 13.100
Word Count Estimation: 12,158
Quoted Standard: GB 4793.1; GB 4793.2; GB 4793.3; GB 4793.4; GB 4793.5; GB 4793.6; GB 4793.7; GB 4793.8; GB/Z 30993-2014
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): Ministry of Health of the People's Republic of China
Summary: This standard specifies the required test equipment compliance verification report reference document. This standard applies to GB 4793 standards compliance verification report preparation.

GBZ30249-2013: Safety requirements for electrical equipment for measurement, control, and laboratory use -- Protocol for the preparation of conformity verification reports for the GB 4793 series

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety requirements for electrical equipment for measurement, control, and laboratory use. Protocols for the preparation of conformity verfication reports for the GB 4793 series ICS 13.100 N09 People's Republic of China national standardization of technical guidance documents Safety requirements for electrical equipment for measurement, control and laboratory use GB 4793 compliance verification report writing procedures Safetyrequirementsforelectricalequipmentformeasurement, control, ofconformityverficationreportsfortheGB 4793series 2013-12-31 released 2014-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Overview 1 4 Compliance Verification Report Applicability 1 5 document 1 6 completion of the report 2 Appendix A (informative) Test Summary Example 5

Foreword

This instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009. This guidance document is proposed by China Machinery Industry Federation. The guidance of technical documents by the National Measurement Control and Laboratory Electrical Equipment Safety Standardization Technical Committee (SAC/TC338) Focused. The drafting of the guidance of technical documents. Machinery Industry Instrumentation Technology and Economy Institute, Shanghai Automation Instrumentation Co., Ltd. Division, Central Day Instrument Co., Ltd., Rockwell Automation China Ltd., Ningbo Donghai Group Co., Ltd., Fujian Run-on precision instruments Co., Ltd., Siemens CNC Co., Ltd., Ministry of Industry and Information Technology Institute of the Fifth, Beijing Medical Device Inspection Institute, Shenzhen, China measured Inspection Technology Co., Ltd., Xiamen Exit Inspection and Quarantine Inspection and Quarantine Technology Center. The main drafters of this technical paper are Wang Yumin, Ni Min, Yang Bin, Wei Zhen, Lu Wen, Ge Jian, Yang Shaoyang, Jiang Chunxu, Zeng Ning, Li Chunlong, Lou Runyu, Mei Ke, Zheng Xu, Liu Xiaojing, Li Hong. Safety requirements for electrical equipment for measurement, control and laboratory use GB 4793 compliance verification report writing procedures

1 Scope

This guidance document specifies the reference documents required for the compliance verification report of the equipment under test. This guideline is applicable to the compilation of GB 4793 standard compliance verification report.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB 4793 (all parts) - Safety requirements for electrical equipment for measurement, control and laboratory use GB /Z 30993-2014 Measurement, control and laboratory use of electrical equipment safety requirements GB 4793.1-2007 compliance test Report format

3 Overview

The Conformity Verification Report is for the applicable standard only, which uses key words or paragraphs in the standard. GB 4793.2 ~ 4793.7 pointed out in the introduction of the revision, if any, applies to GB 4793.1-2007. When arranging the test sequence, testers should put potentially damaging tests in the end. If the list of reports indicates a clause that does not apply, they do not need to be included in the content of the report. Based on GB 4793.1- 2007 examples of specific products reported in Appendix A.

4 Compliance Verification Report Applicability

This guideline is applicable to all parts of GB 4793.

5 files

The following documents a) to e), together with other documents required by GB 4793, should be included in the report. a) a general description of the equipment under test; b) operating instructions; c) installation guide d) Service Guide; e) equipment nameplate and label. Documents f) to r), if applicable, should also be included in the report. f) component data sheet and certification details; can not provide the appropriate certification details, should be marked random test; g) cable data sheet; h) The overall structure of the device structure, especially the key components and components, the location of the cooling holes; should adopt three-dimensional map, photos and other combinations; i) compilation of equipment model specifications details table; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GBZ30249-2013_English be delivered?

Answer: Upon your order, we will start to translate GBZ30249-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GBZ30249-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GBZ30249-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.