GBZ29014.4-2024 English PDF
Basic dataStandard ID: GB/Z 29014.4-2024 (GB/Z29014.4-2024)Description (Translated English): Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items Sector / Industry: National Standard Classification of Chinese Standard: J41 Classification of International Standard: 35.240.50 Word Count Estimation: 170,141 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GBZ29014.4-2024: Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. GB /Z 29014.4-2024.Cutting tool data representation and exchange Part 4.Reference dictionary for applicable items ICS 35.240.50 CCSJ41 Guiding technical documents of the People's Republic of China on national standardization Cutting tool data representation and exchange Part 4.Reference dictionary for adaptation items (ISO /T S13399-4.2021,IDT) Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Abbreviations 4 5 Expression of Ontology Concept Dictionary Entries 4 5.1 General 4 5.2 Adaptation project type 4 5.3 Reference system for adaptation projects 5 5.4 Adaptation project characteristics 6 5.5 General feature types 6 6 Adapting to the characteristics of the project 6 Appendix A (Normative) GB /Z 29014 series principles 13 Appendix B (Informative) Classification Table 15 Appendix C (Informative) Class Definition 17 Appendix D (Informative) Definition of Adaptation Item Characteristics 37 Appendix E (Informative) Project Type Code Illustration 135 Appendix F (Informative) Characteristic Illustrations 156 Appendix G (Informative) Application principles of adapter rotational symmetry parameters 159 References 164ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 4 of GB /Z 29014 "Cutting tool data representation and exchange". GB /Z 29014 has published the following part. --- Part 1.Overview, basic principles and general information model; --- Part 2.Reference dictionary for cutting items; --- Part 3.Tool item reference dictionary; --- Part 4.Adaptation item reference dictionary; --- Part 5.Assembly item reference dictionary; --- Part 100.Definitions, principles and methods of reference dictionaries. This document is equivalent to ISO /T S13399-4.2021 "Cutting tool data expression and exchange Part 4.Adaptation project reference word The document type was adjusted from ISO technical specifications to my country's national standardization guiding technical documents. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Cutting Tools (SAC/TC91). This document was drafted by. Chengdu Xincheng Quantity Tools Co., Ltd., Jiangsu University, Chengdu Tool Research Institute Co., Ltd., Shanghai Jiaotong University, Sentai Yingge (Chengdu) CNC Tool Co., Ltd. and Chengdu Yigao Intelligent Technology Co., Ltd. The main drafters of this document are. Tian Lixin, Huang Xuefeng, Wang Shulin, Xu Gang, Chen Ming, An Qinglong, Ming Weiwei, Xia Keyao, Lai Xiaolin, Xiao Wenjun, Chen Wenlang.IntroductionGB /Z 29014 provides a method for describing various data related to cutting tools and cutting tool assemblies by providing the information structure required. A method for realizing the informational expression of cutting tool data (including all items between the workpiece and the machine tool). Replaceable cutting items), solid tools (e.g. solid drills and solid end mills), assembly tools (e.g. boring bars, indexable drills and Information on indexable milling cutters), adapters (e.g. milling shanks and chucks), components (e.g. washers, screws and clamps) or any combination of these can be included. Exchange. It is intended to facilitate the use, processing and exchange of cutting tool data within and between manufacturers, distributors and users. This document is part 4 of GB /Z 29014 "Cutting tool data expression and exchange". GB /Z 29014 consists of 6 parts. --- Part 1.Overview, basic principles and general information model. The purpose is to provide a basic These principles and general information model are used for other parts of GB /Z 29014. --- Part 2.Cutting project reference dictionary. The purpose is to provide a reference dictionary for cutting projects to support the use of The general information model defined in GB /Z 29014.1. --- Part 3.Tool project reference dictionary. The purpose is to provide a reference dictionary for tool projects to support the use of The general information model defined in GB /Z 29014.1. --- Part 4.Adaptation project reference dictionary. The purpose is to provide a reference dictionary for adaptation projects to support the use of The general information model defined in GB /Z 29014.1. --- Part 5.Assembly Item Reference Dictionary. The purpose is to provide a reference dictionary for assembly items to support the use of The general information model defined in GB /Z 29014.1. --- Part 100.Definitions, principles and methods for reference dictionaries. The purpose is to provide specifications for the creation of reference dictionaries to support the use of The general information model defined in GB /Z 29014.1. The goal of GB /Z 29014 is to provide a method for expressing in a computer-readable form independent of any particular computer system Describes information about cutting tools. This representation will help to communicate cutting tool data within and between different software systems and computer platforms. The processing and exchange of data in order to support the use of such data in production planning, cutting processing and supply of cutting tools. This makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and archives. The method was developed by ISO /TC184/SC4 to express product data using standardized information models and reference dictionaries. An information model is a formal specification of concepts, facts, and data processing types that together describe important parts of the real world and provide A set of clear rules for interpretation. Information is knowledge of concepts, facts, and/or data processing. Data is symbols that express information (using some A symbol or function that identifies information about things by rules and definitions, used in data processing. Usually, the required data is extracted through a data dictionary. To avoid misunderstandings, everyone involved in the communication is expected to use the same information model, the same set of explicit rules, and the same Dictionary. If an information model and its dictionary are written in a computer-readable language, they have the additional benefit of They can be processed by computers. The definition and identification of dictionary entries are defined by standard data, which is composed of instances of EXPRESS entity data types. This is a joint result of the definitions and extensions of ISO /TC184/SC4 and IEC SC3D, ISO 13584-24 and ISO 13584-25. This document uses the following standard content developed by ISO /TC184/SC4. --- EXPRESS language defined in ISO 10303-11 and used in GB /Z 29014.1; --- Data exchange formats and models defined in ISO 10303-21; --- Data dictionary defined in the ISO 13584 series. Cutting tool data representation and exchange Part 4.Reference dictionary for adaptation items1 ScopeThis document specifies the properties and value ranges of the adaptation item reference dictionary and its descriptions. The reference dictionaries specified in this document include. --- Definition and identification of adaptation project categories, and related classification schemes; --- Definition and identification of data element types that adapt to project characteristics; ---Used to describe the definition and identification of the value domain of the above data element type. This document applies to. ---Indicates standard data of various adaptation project categories; ---Standard data indicating the characteristics of various adaptation projects; --- Indicates standard data used to adapt to the value range of project characteristics; ---This document defines the implementation method by which standard data can be exchanged. NOTE 1 ISO 10303-21 specifies the means by which the standard data defined in this document can be exchanged. This document does not apply to. ---Specialized or specialized knowledge in the design and use of cutting tools; --- Principles for determining what information should be transmitted; ---Applications that can store or reference these standard data; --- Other implementation methods other than those defined in this document that can exchange and reference standard data; ---Cutting tool information model; --- Definition of cutting item classes and characteristics; ---Definition of tool item classes and characteristics; ---Definition of assembly item classes and characteristics; --- Definition of connection system classes and characteristics; ---Refer to the definitions of system classes and characteristics. Note 2.The definition of the information model of cutting tools is given in GB /Z 29014.1. Note 3.The definitions of classes and characteristics of cutting items, tool items and assembly items are given in GB /Z 29014.2, GB /Z 29014.3 and GB /Z 29014.5. Note 4.For the definition of classes and characteristics of connection systems and reference systems, see ISO /T S13399-50.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB /Z 29014.100 Cutting tool data expression and exchange Part 100.Definitions, principles and methods of reference dictionaries (GB /Z 29014.100-2024, ISO /T S13399-100.2008, IDT) ISO /T S13399-50 Cutting tool data expression and exchange Part 50.Reference system and common concept reference dictionary ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GBZ29014.4-2024_English be delivered?Answer: Upon your order, we will start to translate GBZ29014.4-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GBZ29014.4-2024_English with my colleagues?Answer: Yes. The purchased PDF of GBZ29014.4-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
