GB/T 9769-2015 English PDF

US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9769-2015: Rim contour measure
Status: Valid

GB/T 9769: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9769-2015	399	Add to Cart	4 days	Rim contour measure	Valid
GB/T 9769-2005	479	Add to Cart	3 days	Rim contour measure	Obsolete
GB/T 9769-1988	679	Add to Cart	5 days	Rim contour inspection	Obsolete

Similar standards

GB/T 9766.6   GB/T 9766.4   GB/T 9766.3   GB/T 9766.2   

Basic data

Standard ID: GB/T 9769-2015 (GB/T9769-2015)
Description (Translated English): Rim contour measure
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G41
Classification of International Standard: 83.160.01
Word Count Estimation: 19,197
Date of Issue: 2015-09-11
Date of Implementation: 2016-08-01
Older Standard (superseded by this standard): GB/T 9769-2005
Quoted Standard: GB/T 2933
Regulation (derived from): National Standard Announcement 2015 No.25
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the terms of the rim contour, contour shape of the detection site and test items, and the ball tape, tape measure and gauge the level of design and use. This standard applies to the following rim contour shape detection: 5 �� drop center rim (5 �� DC), 15 �� drop center rim (15 �� DC), semi-drop rim, 5 �� flat base rim (5 �� FB), miter bottom rim.

GB/T 9769-2015: Rim contour measure

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rim contour measure ICS 83.160.01 G41 National Standards of People's Republic of China Replacing GB/T 9769-2005 Rim contour detection Issued on. 2015-09-11 2016-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 rim contour size code 1 5 3 rim contour detection site 6 test items 3 7 detection tools and methods of use (for 5 ° DC rim contour deep grooves and deep grooves 15 ° DC rim contour) 3 8 half-size detection drop rim contour 14 9 5 ° flat rim, all sloping bottom rim contour size detection 15 Detecting valve hole 10 15

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 9769-2005 "rim contour detection", compared with the GB/T 9769-2005, the main technical differences are as follows. --- Extend the application (see Chapter 1); --- Added "rim contour size code" and the icon (see Figure 1); --- Measuring beads φ16 of ball tape, increasing 5 ° FB-Ⅰ type Nominal rim diameter code 12 and 5 ° FB-Ⅱ type Nominal rim straight Diameter 12, code-named two specifications (see Table 3 and Table 4); --- Increased ball tape measure bead mandrel corresponding to the standard design method (see 7.1.5.7,7.1.5.8); --- Increased half drop rim, 5 ° flat rim, all sloping bottom rim contour detection methods (see Chapter 8, Chapter 9); --- Added "valve hole detection" chapter (see Chapter 10). The standard proposed by China Petroleum and Chemical Industry Association. The standard tire rim by the National Standardization Technical Committee (SAC/TC19) centralized. This standard was drafted. Tianjin Jiurong Wheel Tech Co., Ltd., Shandong Shengtai Wheel Co., Ltd., Beijing Rubber Industry Research and Design Institute, Triangle Tyre Co., tournament round Jinyu Group Co., Ltd., Shandong Linglong Tyre Co., Ltd., Guangzhou South China Rubber Wheel Tire Co., Ltd., Shantou huge tire testing equipment Limited. The main drafters of this standard. Ku Cheng, Wen Xiaolei, Xu energy method, Xu Lihong, Zhang Tao, Liu Bozhong, Miss Polly Chan, Luomiao Qing, Chen Xun, Tian Deli, Moushou Yong. This standard replaces the standards previously issued as follows. --- GB/T 9769-1988, GB/T 9769-2005. Rim contour detection

1 Scope

This standard specifies the terms of the rim contour, contour shape of the detection site and test items, and the ball tape, tape measure and level gauge provided Count and use. This standard applies to the following detection rim contour shape. 5 ° drop center rim (5 ° DC), 15 ° drop center rim (15 ° DC), semi-drop rim, 5 ° flat base rim (5 ° FB), all-sloping bottom rim.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2933 pneumatic tire and wheel rim terminology, specifications and code flags

3 Terms and Definitions

Terms and definitions GB/T 2933, as defined in applicable to this document.

4 rim contour size code

Rim contour size code in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9769-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9769-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9769-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9769-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9769-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9769-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.