GB/T 8944.1-2008 English PDFUS$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8944.1-2008: Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form or pulps (such as flash-dried pulps) baled in slabs Status: Valid GB/T 8944.1: Historical versions
Basic dataStandard ID: GB/T 8944.1-2008 (GB/T8944.1-2008)Description (Translated English): Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form or pulps (such as flash-dried pulps) baled in slabs Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y30 Classification of International Standard: 85-010 Word Count Estimation: 22,290 Date of Issue: 2008-08-19 Date of Implementation: 2009-05-01 Older Standard (superseded by this standard): GB/T 8944.1-1988; GB/T 8944.2-1988 Adopted Standard: ISO 801-1-1994, MOD; ISO 801-2-1994, MOD Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the determination of pulp bales, pulp (such as flash dried pulp) lump sum degrees, and calculate the mass of the batch pulp sales method. This section applies to a variety of pulp and pulp bale block bales. This section applies to most of the pulp, the pulp of each package is about 200kg, the identical and similar thickness 4 ~ 6 (or stack) pulp blocks. This is also applicable to the pulp while not blocks, but easy layered bales. When drilling, if for friction cause significant heating drilling device, the method does not apply, for example, some tough chemical pulp or semi-chemical pulp is there such a phenomenon. This section does not apply to the combination bales. GB/T 8944.1-2008: Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form or pulps (such as flash-dried pulps) baled in slabs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. . Pulps Determination of saleable mass in lots Part 1. Pulp baled in sheet form or pulps (such as flash-dried pulps) baled in slabs ICS 85-010 Y30 National Standards of People's Republic of China Replacing GB/T 8944.1-1988, GB/T 8944.2-1988 Pulps - Determination of salable mass in lots Part 1. pulp and pulp package Pulp (such as flash - dried pulp) package (ISO 801-1.1994, Pulps-Determinationofsaleablemassinlots- Part 1. Pulpbaledinsheetform, ISO 801-2.1994, Pulps- Part 2. Pulps (suchasflash-driedpulps) baledinslabs, MOD) Posted 2009-05-01 2008-08-19 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 8944 "Determination of salable mass of pulp batch" is divided into two parts. --- Part 1. Pulp pulp and pulp package (such as flash - dried pulp) package; --- Part 2. combination package pulp. This section GB/T 8944 Part 1. The partial modification of the use of ISO 801-1.1994 "Determination of bulk sales of pulp quality - Part 1. Pulp pulp package" and ISO 801- 2.1994 "Determination of salable mass of pulp batches Part 2. Pulps (such as flash - dried pulp) package." This part of ISO 801-1.1994 and ISO 801-2.1994 The main differences are as follows. --- Canceled ISO 801-2.1994 Section 2 normative references; --- Canceled ISO 801-2.1994 Annex B (informative) investigation report; --- The ISO 801-1.1994, ISO 801-2.1994 international standard two merge the contents of the present section, this part of the ISO 801-1. 1994, ISO 801-2.1994 Number of control clauses in Appendix A. This Part replaces GB/T 8944.1-1988 "bulk sales of pulp quality assay Part I. The pulp slurry package" and GB/T 8944.2-1988 "the second part of the pulp salable mass in lots Assay. Pulps (such as flash - dried pulp) package." This part of GB /and GB/T 8944.2-1988 compared to T 8944.1-1988 main changes are as follows. --- Increase the preamble. --- Chapter 1 is the GB/T 8944.1-1988 and GB/T 8944.2-1988 Chapter 1 merge. --- Chapter 2 is GB/T 8944.1-1988 and GB/T 8944.2-1988 Chapter 2 merge. Chapter 3 --- including GB/T 8944.1-1988 Chapter 3, Chapter 4, Chapter 5, Chapter 6, Chapter 7 content; wherein 3.2 The accuracy of the scale, accuracy and sense of balance amount has been modified; 3.4.3 adds a constant angle sampling, and to issue Procedure body; 3.4.4 sample was removed from the oven and weighed by the interval "1min" to "30s". --- Chapter 4 contains GB/T 8944.2-1988 Chapter 3, Chapter 4, Chapter 5, Chapter 6, Chapter 7 content; wherein 4.4.5 The sample was removed from the oven and weighed at intervals by the "1min" to "30s". --- Chapter 5 is GB/T 8944.1-1988 and GB/T 8944.2-1988 Chapter 8 content merge. This section of the Appendix A, Appendix B, Appendix C, Appendix D are informative appendices. This part is proposed by the China National Light Industry Council. This part of the paper industry by the National Standardization Committee (SAC/TC141) centralized. This section is drafted. Tianjin People's Republic of China Exit Inspection and Quarantine, China Pulp and Paper Research Institute. The main drafters of this section. Li Jian Yong, Zhao Lihua, Zhang Hui, Shi Wen. This part of the standard replaces the previous editions are. --- GB/T 8944.1-1988, GB/T 8944.2-1988. This section commissioned the National Standardization Technical Committee is responsible for interpreting the paper industry. Pulps - Determination of salable mass in lots Part 1. pulp and pulp package Pulp (such as flash - dried pulp) package1 ScopeThis section GB/T 8944 illustrates the determination of pulp slurry package, pulp (such as flash - dried pulp) lump sum of detail, and calculates batch slurry pin The method of sale quality. This section applies to a variety of packages and clumps of pulp slurry pulp package. This section applies to most of the pulp, pulp of each package is about 200kg, the End Identical and similar thickness of 4 to 6 (or stack) pulp blocks. This section also applies to blocks, although not by the pulp, but easy layering Pulp package. When drilling, if due to friction heat leads to a significant drilling apparatus, the method is not applicable, e.g., some or tough semi-chemical pulp Chemical pulp is there such a phenomenon. This section does not apply to a combination of pulp package.2 Terms and definitionsThe following terms and definitions apply to this part of the GB/T 8944's. 2.1 Overall the same nature pulp slurry package, the contract package by the number of pulp made manifest or both. When a batch of pulp each package package are accompanied by the original certificate, then consider the syrup pack, have a certificate. The original certificate may be as follows Two situations. --- Pulp package GW (2.2) and absolute dryness pulp package (2.4); --- Quality pulp sales package (2.7). 2.2 A pack slurry, slurry or batch number of the total mass of a portion of the pulp. Including. package contents, packaging (pulp or paper), packaged or wire bundle Taping. 2.3 Quality pulp drying to constant weight obtained at 105 ℃ ± 2 ℃. 2.4 Oven dry mass (2.3) and not before drying quality ratio, in order to represent the mass fraction. 2.5 When the moisture content of the pulp and pulp balance the ambient air quality. 2.6 Traditional custom value, in accordance with national and/or commercial agreements are generally 90% or 88%. The air drying of 90% indicates that the pulp contains ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8944.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 8944.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8944.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8944.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8944.1-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8944.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |