GB/T 8942-2016 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 8942-2016: Paper -- Determination of softness Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 8942: Historical versions
Similar standardsGB/T 8942-2016: Paper -- Determination of softness---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT8942-2016NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 85.010 Y 30 Replacing GB/T 8942-2002 Paper – Determination of Softness Issued on. DECEMBER 13, 2016 Implemented on. JULY 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Principle... 4 4 Apparatus... 4 5 Sample Preparation... 6 6 Test Procedures... 6 7 Calculation of Results... 6 8 Test Report... 7ForewordThis Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard replaced GB/T 8942-2002 Paper – Determination of Softness. Compared with GB/T 8942-2002, this Standard has the major changes as follows. --- Increase the principle of softness measurement; --- Add the description of the sample placement when measuring the softness in the longitudinal and lateral directions; and the converting method and examples of the softness when the sample size is less than 100mm×100mm; --- Adjust the length of the plate-shaped probe from the original 240mm to no less than 120.0mm; --- Delete the terms of softness; --- Delete the Appendix A. Please note that some contents of this document may involve patents. The issuing authority of this document does not assume the responsibility of identifying these patents. This Standard was proposed by China Light Industry Council. This Standard shall be under the jurisdiction of National Technical Committee for Standardization of Paper-Making (SAC/TC 141). Drafting organizations of this Standard. Hangzhou Pnshar Technology Co., Ltd.; and China National Pulp and Paper Research Institute. Chief drafting staffs of this Standard. Wang Zhen, Li Ping, Su Hongbo, and Guo Libin. The historical editions replaced by this Standard are as follows. --- GB/T 8942-1988, GB/T 8942-2002. Paper – Determination of Softness1 ScopeThis Standard specifies the method of using the hand-feeling softness tester to determine the softness of paper. This Standard is applicable to various wrinkle toilet paper, tissue paper and its derivatives, as well as other papers that require softness.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB/T 450 Paper and Board--Sampling for Testing3 PrincipleUnder the specified conditions, when the plate-shaped probe presses the sample into the slit to a certain depth (about 8mm), the instrument records the sum BETWEEN bending resistance force of the sample itself AND the maximum vector of the friction force of sample and the slit, which is called the softness of the sample; the smaller the instrument indication value is, the softer the sample.4 Apparatus4.1 Instrument structure The structural schematic diagram of the hand-feeling softness tester can refer to Figure 1. 4.2 Instrument parameters 4.2.1 Slit width The slit width of the instrument shall be divided into 4 grades of 5.00mm, 6.35mm, 10.00mm, and 20.00mm; the width deviation shall not exceed ±0.05mm. 4.2.2 Size of the plate-shaped probe Length is no less than 120.0mm; thickness is 2.0mm; while the radium of measuring orifice arc is 1.0mm. 4.2.3 Average running speed and total stroke of the probe The probe’s average running speed is (1.2±0.24) mm/s; while the total stroke is (12±0.5) mm. 4.2.4 Pressing depth of the sample Pressing depth of the sample is 8.0 +0.5 0 mm. 4.3 Instrument indication value error The instrument indication value error shall be ±1.0%. 4.4 Instrument indication value repeatability The instrument indication value repeatability shall be no greater than 1.0%. 4.5 Precautions The instrument shall be installed on the flat and stable bench.5 Sample Preparation5.1 The sample shall be taken as per GB/T 450; it shall be subjected to the temperature and humidity treatment as per GB/T 10739. 5.2 According to the actual number of layers of the product, cut the sample into the size of 100mm×100mm. If the sample size is less than 100mm×100mm, try to cut he maximum size; the size deviation shall not exceed ±0.5mm.6 Test Procedures6.1 Start and preheat the instrument; then calibrate the instrument as per the instrument manual. 6.2 Place the sample on the middle of the test bench; and make it as symmetrical as possible to the slit. 6.3 Test the remaining samples as per 6.2; separately test 10 effective data in the longitudinal and lateral directions. The samples shall be tests 5 facing up and 5 facing down in each direction.7 Calculation of ResultsThe results shall be expressed by the arithmetic mean of the test results in the longitudinal and lateral directions, in millinewtons, and rounded off to integers.8 Test ReportThe test report shall include the following contents. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 8942-2016 be delivered?Answer: The full copy PDF of English version of GB/T 8942-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 8942-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8942-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 8942-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 8942-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8942-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 8942-2016?A step-by-step guide to download PDF of GB/T 8942-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 8942-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
