GB/T 8650-2015 English PDF

US$739.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8650-2015: Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking
Status: Valid

GB/T 8650: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 8650-2015	739	Add to Cart	6 days	Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking	Valid
GB/T 8650-2006	639	Add to Cart	3 days	Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking	Obsolete
GB/T 8650-1988	479	Add to Cart	4 days	Test method of pipeline steels for resistance to stepwise cracking	Obsolete

Similar standards

GB/T 7998   GB/T 10125   GB/T 4334   GB/T 3246.1   GB/T 5776   

Basic data

Standard ID: GB/T 8650-2015 (GB/T8650-2015)
Description (Translated English): Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H25
Classification of International Standard: 77.060
Word Count Estimation: 35,358
Date of Issue: 2015-12-10
Date of Implementation: 2016-11-01
Older Standard (superseded by this standard): GB/T 8650-2006
Regulation (derived from): National Standard Announcement 2015 No.38
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 8650-2015: Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking ICS 77.060 H25 National Standards of People's Republic of China Replacing GB/T 8650-2006 Determination of Hydrogen - induced Cracking of Pipeline Steel and Pressure Vessel Steel Evaluation ofpipelineandpressurevesselsteelsforresistance 2015-12-10 released 2016-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 test principle 1 4 Reagent 1 5 test equipment 2 6 steel pipe sample 2 7 steel plate sample 6 8 tube specimen 9 9 Flange Specimen 10 10 Test Procedure 11 11 Sample Evaluation 12 12 Test Report 14 Appendix A (normative) Safety considerations for controlling H2S toxicity 15 Appendix B (informative) Supplementary description of test methods 16 Appendix C (normative) Preparation and chemical composition of artificial seawater 17 Appendix D (informative) Specimen Desiccant effect Spray test 18 Appendix E (Normative Appendix) Fittings and Flange Sampling Positions Appendix F (informative) Determination of H2S concentration in test solution by iodometric method Reference 28

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 8650-2006 "Pipeline steel and pressure vessel steel anti-hydrogen cracking assessment method". With GB/T 8650- 2006 compared to the main technical changes are as follows. - increase the sampling position and orientation of spiral welded pipe specimens (see 6.2); - Increased conditions for post-storage samples for test (see 6.4); - increase the size of the pipe, the size of the flange, the direction of the sample and the number of samples, sample preparation, sample cleaning and storage (see Chapter 8 and Chapter 9); - Increased pipe and flange sampling position (see Appendix C); - modified the amount of starch indicator in the iodometric method (see Appendix F); - The formula for calculating the concentration of hydrogen sulfide (H2S) has been modified (see Appendix D). This standard is proposed by China Iron and Steel Industry Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). The drafting of this standard. China Petroleum Group Engineering Design Co., Ltd. Southwest Branch, Metallurgical Industry Information Standards Institute, steel Iron Research Institute. The main drafters of this standard. Shi Daiyan, Li Tianlei, Chen Yongbin, Hou Jie, Jiang Fang, Cao Xiaoyan, Feng Han. This standard replaced the previous version of the standard release. --- GB/T 8650-1988, GB/T 8650-2006. Determination of Hydrogen - induced Cracking of Pipeline Steel and Pressure Vessel Steel

1 Scope

1.1 This standard specifies the pipeline steel and pressure vessel steel plate and flanges and fittings in the corrosive environment containing sulfide aqueous solution, Hydrogen - induced Hydrogen - induced Cracking (HIC) Evaluation Method. 1.2 This standard provides the size, quantity, position and orientation of each steel product type, the type of steel product including steel pipe, steel plate, Fittings and flanges. 1.3 This standard includes small diameter (nominal diameter [DN] 50 ~ 150, nominal pipeline size [NPS] 2 ~ 6), thin wall (wall thickness is not greater than 6mm) resistance welding (ERW) and seamless steel pipe special steps required. Unless otherwise specified in this standard, these small diameters, thin-walled materials, And other steel pipe with the same method of testing. 1.4 This standard does not contain guidelines for acceptance or rejection, but Chapter 8 of GB/T 20972.2-2008 provides guidance.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 8923.1-2011 Visual evaluation of surface cleanings of steel surface before coating of coatings - Part 1. Uncoated Of the steel surface and the full removal of the original coating after the steel surface corrosion grade and treatment level GB/T 20972.2.2-2008 Petroleum and natural gas industries - Materials for use in hydrogen sulfide-containing environments for oil and gas extraction - Part 2. Anti- Cracking carbon steel, low alloy steel and cast iron GB Z2.1 Workplace Hazardous Factors Occupational Exposure Limits Chemical Hazardous Factors

3 test principle

3.1 The test method of this standard is to immerse the stress-free sample in any of the following two standard solutions. Solution A, normal temperature and pressure (H2S), sodium chloride (NaCl) and acetic acid (acetic acid, CH3COOH) in distilled water or deionized water; solution B, under normal temperature and pressure, with saturated H2S artificial seawater. After soaking for a predetermined period of time, the sample is taken out and evaluated. 3.2 The test method of this standard is not simulated service conditions. This method provides only a reproducible test environment so that it can be in phase The sensitivity of different steel samples to hydrogen induced cracking (HIC) is different for short periods of time. Note. The test time may not be able to extend the crack to the maximum in any test steel, but it is sufficient to meet the purpose of this test.

4 reagent

4.1 Solution A The reagents should be nitrogen (N2) for deaeration, H2S gas (safety considerations for controlling H2S toxicity, see Appendix A), NaCl, CH3COOH and distilled water or deionized water. Solution B should be used for the removal of N2, H2S and artificial seawater. 4.2 Analytical pure chemicals for NaCl and CH3COOH applications. 4.3 H2S gas purity of not less than 99.5%, N2 for high purity nitrogen, water application of distilled water or deionized water (see Appendix B). 4.4 artificial seawater reagents should be formulated in accordance with Appendix C. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 8650-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 8650-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 8650-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 8650-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 8650-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8650-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.