GB/T 5776-2023 English PDFUS$349.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5776-2023: Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water Status: Valid GB/T 5776: Historical versions
Basic dataStandard ID: GB/T 5776-2023 (GB/T5776-2023)Description (Translated English): Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H25 Classification of International Standard: 77.060 Word Count Estimation: 18,192 Date of Issue: 2023-08-06 Date of Implementation: 2024-03-01 Older Standard (superseded by this standard): GB/T 5776-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5776-2023: Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 77.060 CCSH25 National Standards of People's Republic of China Replace GB/T 5776-2005 Corrosion of Metals and AlloysMetals and Alloys in Guidelines for exposure and assessment in surface seawater (ISO 11306.1998,MOD) Published on 2023-08-06 2024-03-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 5776-2005 "Corrosion of Metals and Alloys. Guidelines for exposure and assessment of metals and alloys in surface seawater." "Principles", compared with GB/T 5776-2005, in addition to structural adjustments and editorial changes, the main technical changes are as follows. ---Added normative reference document GB/T 10123 (see Chapter 3); ---Deleted the provisions for specimen suspension and fixation (see 5.5 of the.2005 edition); ---Added the recommended value for the spacing between specimens (see 6.3); ---Added the recommended sample fixing positions and methods in the seawater full immersion zone, tidal range zone and splash zone (see 6.6~6.8); ---Changed the recommended dimensions for plate specimens (see 7.1, 6.1 of the.2005 edition); ---Added sample processing dimensional drawing (see 7.1); ---Changed the recommended time for sampling (see 7.3, 6.3 of the.2005 version); ---Added the requirement that the surface of the sample should be as defect-free as possible, and if defects exist, they should be recorded or photographed (see 8.3); ---Added provisions for recording the adhesion of organisms and rust layers during sampling (see 9.1); --- Added surface observation and evaluation methods and requirements for special corrosion type specimens (see 9.6); --- Added requirements for corrosion assessment on the side of the specimen (see 9.7); ---Added provisions giving the corrosion type of the specimen (see Chapter 10). This document has been modified to adopt ISO 11306.1998 "Corrosion of metals and alloys. Guide for the exposure and assessment of metals and alloys in surface seawater." but". Compared with ISO 11306.1998, this document has many adjustments in structure. A comparison list of structural number changes between the two documents See Appendix A. Compared with ISO 11306.1998, there are many technical differences between this document and the clauses involved in the outer margins. Straight single lines (|) are marked. A list of these technical differences and their causes is provided in Appendix B. Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the China Iron and Steel Industry Association. This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). This document was drafted by. Iron and Steel Research Institute Qingdao Marine Corrosion Research Institute Co., Ltd., Metallurgical Industry Information Standards Research Institute, Qingdao Steel Anaco Detection and Protection Technology Co., Ltd. The main drafters of this document. Qu Zheng, Hou Jie, Ding Guoqing, Tian Zijian, Yang Haiyang, Li Qian, Ding Jifeng. Corrosion of Metals and AlloysMetals and Alloys in Guidelines for exposure and assessment in surface seawater1 ScopeThis document describes the conditions and methods for exposing metals and alloys to surface seawater and specifies the assessment of seawater corrosion of metals and alloys. requirements in order to make meaningful comparisons of exposures in different locations. This document is applicable from the important moist zones above the water surface (splash zone and tidal zone) to below the water surface with a composition similar to that of surface seawater. Depth of exposure. Due to the variability and complexity of seawater, the exposure time is usually more than one year to reduce the impact of variable factors.2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 10123 Corrosion terminology for metals and alloys GB/T 16545 Corrosion of metals and alloys Removal of corrosion products from corrosion specimens (GB/T 16545-2015, ISO 8407. 2009,IDT) GB/T 18590 Assessment of corrosion pitting of metals and alloys (GB/T 18590-2001, ISO 11463.1995, IDT)3 Terms and definitionsThe terms and definitions defined in GB/T 10123 apply to this document.4 control sampleDue to the variability of test process conditions, for the sake of rigor, the following two types of control specimens should be used in corrosion tests. a) For specimens whose properties are completely determined and corroded under given conditions (for example. low carbon steel), the corrosion rate can be used to determine the test specimen's corrosion rate. length of testing time; b) Specimens that are usually resistant to corrosion under given conditions (e.g. copper); the purpose of using such specimens is to find out whether Abnormal situations, such as chemical contamination; when evaluating aluminum alloys, if copper samples are present, attention should be paid to the distance between different samples (see 6.2).5 test locations5.1 The test location should be selected in a typical natural seawater environment where the metals and alloys being tested are likely to be used. An ideal natural seawater testing site The point should be built in a location that can meet the conditions necessary for these tests (such as splash, tide, total immersion) and have protective measures to avoid disasters. test The location should have clean, pollution-free seawater, except when studying corrosion caused by pollution. The differences between tropical environments and other environments should be understood in order to and seasonal changes in temperature. There are locations with a clear "fouling organism season". It is necessary to understand the seasonal changes in the attachment of marine organisms on the test plate. Selecting Climate and atmospheric properties are also important factors to consider when selecting test sites for tidal or splash exposure. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5776-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 5776-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5776-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5776-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5776-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5776-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
