GB/T 8152.16-2022 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8152.16-2022: Methods for chemical analysis of lead concentrates - Part 16: Determination of calcium oxide content - Flame atomic absorption spectrometric method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 8152.16-2022	259	Add to Cart	3 days	Methods for chemical analysis of lead concentrates - Part 16: Determination of calcium oxide content - Flame atomic absorption spectrometric method	Valid

Similar standards

GB/T 8647.11   GB/T 8151.1   GB/T 8151.10   GB/T 8152.17   GB/T 8152.11   GB/T 8152.15   

Basic data

Standard ID: GB/T 8152.16-2022 (GB/T8152.16-2022)
Description (Translated English): Methods for chemical analysis of lead concentrates - Part 16: Determination of calcium oxide content - Flame atomic absorption spectrometric method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H13
Word Count Estimation: 13,196
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 8152.16-2022: Methods for chemical analysis of lead concentrates - Part 16: Determination of calcium oxide content - Flame atomic absorption spectrometric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of lead concentrates - Part 16.Determination of calcium oxide content - Flame atomic absorption spectrometric method ICS 77.120.60 CCSH13 National Standards of People's Republic of China Methods for chemical analysis of lead concentrates Part 16.Determination of calcium oxide content flame atomic absorption spectrometry Published on 2022-03-09 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is Part 16 of GB/T 8152 "Methods for Chemical Analysis of Lead Concentrates", GB/T 8152 "Methods for Chemical Analysis of Lead Concentrates" has been The following sections were published. --- Part 1.Determination of the amount of lead acid dissolution-EDTA titration; --- Part 2.Determination of lead content by lead sulfate precipitation-EDTA back titration method; --- Part 3.Determination of the amount of aluminum oxide chrome azure S spectrophotometry; --- Part 4.Determination of zinc content by EDTA titration; --- Part 5.Determination of Arsenic Atomic Fluorescence Spectrometry; --- Part 6.Polarographic determination of bismuth content; --- Part 7.Determination of copper content by flame atomic absorption spectrometry; --- Part 8.Determination of bismuth content by dithiodiantipyrine methane spectrophotometry; --- Part 9.Determination of magnesium oxide content by flame atomic absorption spectrometry; --- Part 10.Determination of silver content and gold content by lead precipitation or ash-blown fire test and flame atomic absorption spectrometry; --- Part 11.Determination of mercury content by atomic fluorescence spectrometry; --- Part 12.Determination of cadmium content by flame atomic absorption spectrometry; --- Part 13.Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry; --- Part 14.Determination of silica content molybdenum blue spectrophotometry; --- Part 15.Determination of soluble lead content by flame atomic absorption spectrometry; --- Part 16.Determination of calcium oxide content by flame atomic absorption spectrometry. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Nonferrous Metals Industry Association. This document is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243). This document is drafted by. Zhuzhou Smelting Group Co., Ltd., Shenzhen Zhongjin Lingnan Nonferrous Metals Co., Ltd. Shaoguan Smelting factory, Hunan Nonferrous Metals Research Institute Co., Ltd., Zijin Mining Group Co., Ltd., Tongling Nonferrous Metals Group Holdings Co., Ltd., Shaanxi Dongling Smelting Co., Ltd., China Inspection and Certification Group Guangxi Co., Ltd., Shandong Hengbang Smelting Co., Ltd., National Standard (Beijing) Inspection Certification Co., Ltd., Shenzhen Customs Industrial Product Testing Technology Center, China Nonferrous Guilin Mineral Geology Research Institute Co., Ltd., North Mine Testing Technology Technology Co., Ltd., Guizhou Provincial Institute of Analysis and Testing, Changsha Mining and Metallurgy Research Institute Co., Ltd., Shenzhen Zhongjin Lingnan Nonferrous Metals Co., Ltd. Co., Ltd. Fankou lead-zinc mine. The main drafters of this document. Yu Liang, Wang Jun, Wang Jing, Zuo Hongyi, Shi Shilong, Zhang Xuelian, Liu Juan, Yang Yehao, Zhang Yuan, Xie Yanhong, Li Changchun, Hu Dongdong, Lu Qianqian, Yu Yaowu, Han Fang, Meng Lijuan, Wu Xueying, Liang Haimin, Wei Yajuan, Ni Yucheng, Ma Lingyun, Sun Haifeng, Chen Xiongfei, Li Xu, Feng Junli, Tang Rongsheng, Wang Jiangliang, Han Xiao, Ruan Guise, Zeng Yin, Yu Hang, Xie Xi, Yang Binghong, Tang Ping, Liang Junsheng, Gou Guangfen.

Introduction

This document is Part 16 of GB/T 8152 "Methods for Chemical Analysis of Lead Concentrates", which is a supplement and improvement to this series of standards. GB/T 8152 "Methods for Chemical Analysis of Lead Concentrates" revised and released 10 methods in.2006 (2 methods for the determination of bismuth in the 1987 edition continued Reservation, a total of 12 methods), and then considering the needs of environmental protection and production control, in.2017, the 13th part of the method for determination of thallium was released, in In.2019, Part 14 for the determination of silica content was published, and in May 2021, Part 15 for the determination of soluble lead content was published. In addition, the release of the new method for the determination of calcium oxide content and the subsequent inductively coupled plasma emission spectrometry to be added are more Elemental determination methods will improve the ease of use and applicability of the standard. In addition, the determination of antimony content in lead concentrates can refer to the national regulations issued in 2020. National standardization guiding technical document GB /Z 39124-2020 "Determination of Antimony Content in Lead Concentrate Chemical Analysis Method" Cerium Sulfate Titration Method. Methods for chemical analysis of lead concentrates Part 16.Determination of calcium oxide content flame atomic absorption spectrometry Caution - Persons using this document should have practical experience in formal laboratory work. This document does not address all possible security issues question. It is the user's responsibility to take appropriate safety and health measures and to ensure compliance with the conditions stipulated by relevant national regulations.

1 Scope

This document specifies a method for the determination of calcium oxide content in lead concentrates. This document applies to the determination of calcium oxide content in lead concentrates. The measurement range is. 1.00%~5.00%.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 6682 Analysis Laboratory Water Specifications and Test Methods

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document.

4 Method summary

The sample is dissolved with hydrochloric acid, nitric acid, hydrofluoric acid and perchloric acid. In the dilute hydrochloric acid medium, a certain amount of strontium chloride is added to suppress interfering elements. Air-acetylene flame, at the wavelength of 422.7nm atomic absorption spectrometer, measure the absorbance of calcium, and calculate the content of calcium oxide by working curve method.

5 Reagents

Unless otherwise specified, only analytical grade reagents were used. 5.1 Water, GB/T 6682, Class II. 5.2 Hydrofluoric acid (ρ=1.15g/mL). 5.3 Hydrochloric acid (ρ=1.19g/mL). 5.4 Nitric acid (ρ=1.42g/mL). 5.5 Hydrobromic acid (ρ=1.50g/mL). 5.6 Perchloric acid (ρ=1.76g/mL). 5.7 Hydrochloric acid (1 1). 5.8 Strontium solution (20g/L). Weigh 30.43g of strontium chloride (SrCl2·6H2O) in a 250mL beaker, dissolve it in water, and transfer it to In a 500mL volumetric flask, dilute to the mark with water and mix well. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 8152.16-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 8152.16-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 8152.16-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 8152.16-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.