GB/T 8054-2008 English PDFUS$949.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 8054-2008: Single sampling procedures and tables for Inspection having desired operating Characteristics by variables Status: Valid GB/T 8054: Historical versions
Basic dataStandard ID: GB/T 8054-2008 (GB/T8054-2008)Description (Translated English): Single sampling procedures and tables for Inspection having desired operating Characteristics by variables Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 03.120.30 Word Count Estimation: 43,477 Date of Issue: 2008-07-16 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 8054-1995; GB/T 8053-2001 Quoted Standard: GB/T 4091; GB/T 4883; GB/T 19000-2000; GB/T 10111; ISO 3534-1-2006; ISO 3534-2-2006 Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the rate of defective products to the mean and the measurement of standard quality indicators once sampling procedures and implementation. This standard applies to product quality characteristics in order to measure value represents the approximate normal distribution and obey or inspection. This standard specifies the production side risk a = 0. 05, consumer's risk �� = 0. 10. GB/T 8054-2008: Single sampling procedures and tables for Inspection having desired operating Characteristics by variables---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Single sampling procedures and tables for Inspection having desired operating Characteristics by variables ICS 03.120.30 A41 National Standards of People's Republic of China Replacing GB/T 8053-2001 GB/T 8054-1995 Measurement standard sampling procedures and tables Posted 2008-07-16 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions, symbols 1 3.1 Terms and definitions 1 3.2 Symbols 3 4 in mean quality index sampling 4 4.1 sampling program 4 4.2 implementation of sampling test 4 4.3 Example 6 to determine the sampling plan 4.4 Sampling Table 9 5 substandard product sampling rate of 19 quality indicators Sampling program 5.1 19 5.2 implementation of sampling test 19 5.3 Application Examples 21 5.4 Sampling Table 22 Table 1 sided specification limits the amount of sample and receiving constant "σ" method (the mean mass index) 9 Table 2 sided specification limits "σ" sample size and method of receiving constant (with a mean of quality indicators) 10 Table 3 sided specification limit "Ju" sample size and method of receiving constant (with a mean of quality indicators) 14 Table 4 sample and receiving constant bilateral specification limit "Ju" method (with a mean of quality indicators) 15 Table 5-sided specification limits "σ" sample size and receive constant (rate of substandard product quality indicators) 23 Law Table 6 sided specification limits "σ" sample size and method of receiving constant (rate of substandard product quality indicators) 25 Sample size table and receive constant (rate of substandard product quality indicators) 327 "Ju" method Appendix A (normative) Product quality is stable or not testing methods 34 Standard deviation of the estimation methods Appendix B (normative) Batch 36 Annex C (informative) characteristics of the sampling function (with a mean of quality indicators) 37 Annex D (informative) characteristics of the sampling function (with nonconforming rate quality indicators) 38 Quantile value of Appendix E (normative) Common percent nonconforming Table 39ForewordThis standard by GB/T 8054-1995 "mean a measurement standard sampling procedures and tables" and GB/T 8053-2001 "Measuring the rate of nonconforming primary sampling procedures and tables" from integration. This standard replaces GB/T 8054-1995 "mean a measurement standard sampling procedures and tables" and GB/T 8053- 2001 "Measurement nonconforming rate of one sampling procedures and tables." This standard and GB/T 8053-2001, GB/T 8054-1995 compared to the changes include. 1) correct errors in the original standard. The U-L To U-L 2) The "Hope characteristic value is low (given the specification limit) when" with "a given specification limit (desired characteristic value is low)." The "Hope high intrinsic value (to set the size limits) when" read "to set the size limit (desired characteristic value is high)." The "Hope characteristic values \u200b\u200bwithin a certain range (given bilateral Specification Limit) When" with "a given bilateral specification limits (in a desired characteristic value Within a given range) " The Standard Annexes A and B are normative appendixes, Appendix C, Appendix D and Appendix E information appendix. Application of this standard by the National Standardization Technical Committee on statistical methods (SAC/TC21) centralized. This standard drafting units. China National Institute of Standardization, Guangzhou Product Quality Supervision, Inspection, Hainan Province, product quality supervision, inspection, no Tin City Product Quality Supervision, Inspection, Beijing University of Technology. The main drafters of this standard. YU Zhen Fan, Dengsui Xing, Ding Wenxing Party of China, Chen Lijian, Huang Yan, Wu Jianguo, CHEN Hua-ying, in good odd. This standard replaces the standards previously issued as follows. --- GB/T 8053-1987, GB/T 8053-2001; --- GB/T 8054-1987, GB/T 8054-1995. Measurement standard sampling inspection procedures and sample forms1 ScopeThis standard specifies the ratio of the mean and defective quality indicators measurement standard sampling inspection procedures and implementation. This standard applies to product quality characteristics measured value representation and subject to inspection or approximately normally distributed. This standard specifies the production side risk α = 0.05, consumer's risk β = 0.10.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 4091 conventional control charts (GB/T 4091-2001, idt, ISO 8258.1991) Analyzing and processing GB /statistical processing and interpretation of normal sample values \u200b\u200bT 4883 data GB/T 19000-2000 Quality Management System - Fundamentals and vocabulary (idt ISO 9000.2000) GB/T 10111 random number generation and sampling product quality ISO 3534-1.2006 statistical terms - Part 1. General statistical terms and terms used in probability ISO 3534-2.2006 statistical terms - Part 2. Applied Statistics 3 Terms and definitions, symbols ISO 3534-1.2006, ISO 3534-2.2006 and GB/T 19000-2000 determine the terms, definitions and symbols as well as following surgery Language, definitions and symbols apply to this standard. 3.1 Terms and Definitions 3.1.1 Required for the implementation of inspection and sampling of the product division of the basic unit. 3.1.2 For the implementation of sampling and brought together a group of products. (Abbreviation. Batch) 3.1.3 Unit Features subject of continuous scales can measure quality characteristics. 3.1.4 Predetermined sampling plan from the batch randomly selected a certain number of units of product. Acquire their mass by measuring, testing or other methods The amount of characteristic values, compared with the quality requirements, the batch process and determine whether the product received. 3.1.5 According to the test results of samples from a batch extraction, decide whether to accept the batch. [ISO 3534-2.2006,4.4] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8054-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 8054-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 8054-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8054-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 8054-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8054-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
