GB/T 7354-2018_English: PDF (GB/T7354-2018)
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| GB/T 7354-2018 | 999 |
Add to Cart
|
7 days
|
High-voltage test techniques -- Partial discharge measurements
| Valid |
| GB/T 7354-2003 | RFQ |
ASK
|
4 days
|
Partial discharge measurements
| Obsolete |
| GB/T 7354-1987 | 639 |
Add to Cart
|
5 days
|
Partial discharge measurements
| Obsolete |
| Standard ID | GB/T 7354-2018 (GB/T7354-2018) | | Description (Translated English) | High-voltage test techniques -- Partial discharge measurements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K40 | | Classification of International Standard | 19.080 | | Word Count Estimation | 50,578 | | Date of Issue | 2018-09-17 | | Date of Implementation | 2019-04-01 | | Older Standard (superseded by this standard) | GB/T 7354-2003 | | Issuing agency(ies) | State Administration of Markets and China National Standardization Administration |
GB/T 7354-2018
High-voltage test techniques - Partial discharge measurements
ICS 19.080
K40
National Standards of People's Republic of China
Replace GB/T 7354-2003
High voltage test technique partial discharge measurement
(IEC 60270.2000, MOD)
Published on.2018-09-17
Implementation of.2019-04-01
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 range 1
2 Normative references 1
3 Terms and Definitions 1
4 Test circuit and test procedure 5
4.1 General requirements 5
4.2 Test circuit 6
4.3 Test procedure 9
5 Measuring system 10
5.1 Overview 10
5.2 Apparent Charge Measurement System 11
5.3 Requirements for digital partial discharge measuring instruments 12
5.4 Measurement system for deriving parameters 13
5.5 Ultra-wideband partial discharge measuring instrument 14
6 Calibration of the measurement system in the complete test circuit 14
6.1 General 14
6.2 Calibration procedure 14
6.3 Calibrator 16
6.4 Determination of calibrator and measurement system characteristics 19
6.5 Measurement uncertainty and sensitivity 22
7 interference 23
Appendix A (informative) Structural changes in this standard compared to IEC 60270.2000 24
Appendix B (Normative) Performance Test for Calibrators 25
Appendix C (informative) Test circuit 30
Appendix D (informative) Cable, gas-insulated switchgear, power capacitors and partial discharge measurements with winding samples 31
Appendix E (informative) Detection of partial discharge using a radio jammer 32
Appendix F (informative) Partial discharge measuring instrument 34
Appendix G (informative) Non-electrical measurement of partial discharges 38
Appendix H (informative) Interference 39
Appendix I (informative) Evaluation of partial discharge test results during DC voltage test 42
Reference 44
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 7354-2003 "Partial Discharge Measurement". Compared with GB/T 7354-2003, the main changes are as follows.
--- Modified the definition of the term "digital partial discharge measuring instrument"; added the term "accumulated apparent charge" "number of partial discharge pulses"
Partial discharge mode";
--- Added a list of partial discharge measurement test procedures (for AC, DC);
---Modified the upper and lower limits of the broadband PD measurement system;
--- gives the calibrator - the condition that characterizes the unipolar step voltage amplitude U0 parameter;
--- In the performance test of the calibrator, an indirect measurement method of the step voltage rise time is given;
--- Added Appendix F partial discharge measuring instrument;
--- Added an assessment of the results of the partial discharge test during the DC voltage test in Appendix I.
This standard uses the redrafting method to modify the IEC 60270.2000 "High Voltage Test Technology Partial Discharge Measurement".
This standard has more structural adjustments than IEC 60270.2000. Appendix A lists this standard and IEC 60270.2000.
The chapter number is compared to the list.
The technical differences between this standard and IEC 60270.2000 and their reasons are as follows.
---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments
The situation is reflected in Chapter 2, “Regulatory References”, and the specific adjustments are as follows.
● Replace IEC 60060-1 with GB/T 16927.1-2011 modified to adopt international standards;
● Replace IEC 60060-2 with GB/T 16927.2-2013 modified to adopt international standards;
● Replace CISPR16-1.1993 with GB/T 6113.101 equivalent to the international standard;
--- In order to standardize test implementation and measurement, an enumeration of partial discharge measurement test procedures (for AC and DC) has been added;
--- In the performance test of the calibrator, in order to facilitate the operation and practical, an indirect measurement method of the step voltage rise time is given.
This standard also made the following editorial changes.
--- This standard incorporates amendments to IEC 60270.2000/Amd.1.2015, and the terms of these amendments have been adopted.
The vertical double line (‖) of the outer side blank position is marked;
--- In the suppression of PD interference, the description of the single-point grounding method applied in China's power grid engineering has been added.
This standard was proposed by the China Electrical Equipment Industry Association.
This standard is under the jurisdiction of the National High Voltage Test Technology and Insulation Coordination Technical Committee (SAC/TC163).
This standard was drafted. Xi'an High Voltage Electric Apparatus Research Institute Co., Ltd., China Electric Power Research Institute Co., Ltd., China Metrology
Institute of Research, National High Voltage Electrical Apparatus Quality Supervision and Inspection Center, Machinery Industry Fifth (Xi'an) Metrology and Testing Center Station, Xi'an Xidian Switch Electric
Co., Ltd., Pinggao Group Co., Ltd., New Northeast Electric Group High Voltage Switchgear Co., Ltd., Shenyang Transformer Research Institute Co., Ltd.
Company, Beijing Beikai Electric Co., Ltd., Suzhou Huadian Electric Co., Ltd., Xi'an Xidian Power System Co., Ltd., Zhejiang
Guanchang Co., Ltd., Hunan Changgao High Voltage Switch Group Co., Ltd., Ningbo Kenli High Voltage Switch Technology Co., Ltd., Zhejiang Shitong Electric Manufacturing Co., Ltd.
Co., Ltd., Chongqing University, State Grid Anhui Electric Power Company Electric Power Research Institute, State Grid Shaanxi Electric Power Company Electric Power Research Institute,
Hebei Electric Power Company Electric Power Research Institute, State Grid Zhejiang Electric Power Company, State Grid Electric Power Research Institute Wuhan Nanrui Co., Ltd.
Division, State Grid Shanxi Electric Power Company Electric Power Research Institute, State Grid Shandong Electric Power Company Electric Power Research Institute, State Grid Hunan Electric Power Company
Electric Power Research Institute, State Grid Jiangsu Electric Power Company Electric Power Research Institute, Inner Mongolia Electric Power (Group) Co., Ltd., Yunnan Power Grid
Limited liability company Electric Power Research Institute, Shanghai Metrology and Testing Technology Research Institute, Hangzhou West Lake Electronics Research Institute, Kunming Electrical Apparatus Research Institute,
Yichang City, Hubei Province Metrology Testing Institute.
The main drafters of this standard. Cui Dong, Lei Min, Liu Na, Wei Peng, Zhou Wei, Su Chunqiang, Wang Siqi, Wang Jiansheng, Li Qiang, Li Wei, Zhang Wei, Wang Ting,
Zhang Jinbo, Wang Xianle, Wang Xiangke, Li Fuyong, Sun Maoyou, Zhao Juan, Lu Xiangpeng, Sun Rongchun, Yu Qing, Sun Xiaoping, Shen Jianwei, Li Junmin, Hu Guangfu,
Ye Shuxin, Wang Youyuan, Zhu Taiyun, Zhao Xuefeng, Pan Wei, Gong Jinlong, Cheng Lin, Wang Tianzheng, Liu Min, Ye Huisheng, Zhou Zhicheng, Che Chuanqiang, Tan Xiangyu,
Pan Yang, Hu Weixing, Zhang Wubo, Zhou Qiongfang, Chen Yu.
The previous versions of the standards replaced by this standard are.
---GB 7354-1987, GB/T 7354-2003.
High voltage test technique partial discharge measurement
1 Scope
This standard defines the terminology of partial discharge and related measured parameters, specifies the test circuit used, the measurement circuit, and the general simulation.
And digital measurement methods, and give the calibration method and requirements for calibration instruments, test procedures, criteria for distinguishing between partial discharge and external interference.
This standard applies to electrical equipment, components or systems produced at AC voltage or DC voltage tests with a frequency of 400 Hz or less.
Raw partial discharge measurements.
The provisions of this standard can be used to draft technical conditions for partial discharge measurements of specific electrical equipment. This standard mainly involves pulse type (short duration
Time) Electrical measurements of partial discharges also give non-electrical measurement methods primarily used for partial discharge localization (see Appendix G).
The characteristic diagnosis of a particular power device can be digitized by a partial discharge signal (see Appendix F) and primarily for partial discharge
The non-electrical measurement method of the bit (see Appendix G) is completed.
This standard mainly describes the electrical measurement method of partial discharge during AC voltage test, and also mentions the special phenomenon that occurs during DC voltage test.
Special problem (see Chapter 4).
This standard terminology, definitions, basic test circuits and procedures are also generally applicable to tests conducted at other frequencies, but may require special
Special test methods and measurement system characteristics, these requirements are not considered in this standard.
Appendix B provides the requirements for calibrator performance testing as a requirement.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 16927.1-2011 Part 1 . General definitions and test requirements (IEC 60060-1.2010,
MOD)
GB/T 16927.2-2013 High voltage test techniques - Part 2. Measurement systems (IEC 60060-2.2010, MOD)
GB/T 6113.101 Radio disturbance and immunity measuring equipment and measuring methods - Part 1-1. Radio disturbance and immunity
Measuring equipment measuring equipment (CISPR16-1-1..2010, IDT)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Partial discharge partialdischarge; PD
Electrical insulation between conductors is on......
|