GB/T 6974.2-2017 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6974.2-2017: Cranes -- Vocabulary -- Part 2: Mobile cranes Status: Valid GB/T 6974.2: Historical versions
Basic dataStandard ID: GB/T 6974.2-2017 (GB/T6974.2-2017)Description (Translated English): Cranes -- Vocabulary -- Part 2: Mobile cranes Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J80 Classification of International Standard: 01.040.53; 53.020.20 Word Count Estimation: 14,120 Date of Issue: 2017-10-14 Date of Implementation: 2018-05-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 6974.2-2017: Cranes -- Vocabulary -- Part 2: Mobile cranes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Cranes - Vocabulary - Part 2. Mobile cranes ICS 01.040.53; 53.020.20 J80 National Standards of People's Republic of China Replacing GB/T 6974.2-2010 Crane terminology Part 2. Mobile cranes (ISO 4306-2.2012, IDT) 2017-10-14 Published 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordGB/T 6974 "crane terms" is divided into the following sections. --- Part 1. General Terms; --- Part 2. Mobile cranes; --- Part 3. Tower cranes; --- Part 4. Boom cranes; --- Part 5. Bridge and Gantry Crane; --- Part 6. Railway cranes. This section GB/T 6974 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This section replaces GB/T 6974.2-2010 "Crane Terminology Part 2. Mobile cranes." And GB/T 6974.2- 2010 compared to the main technical changes are as follows. --- Added "Crane configuration, crane preparation, rated capacity, maximum rated capacity" of the four terms and definitions (see 2.1.2, 2.1.3, 2.1.4 and 2.1.5); --- "Installation Type" was revised to "walking mode" (see 2.2,.2010 version 2.2); --- "Fixed-length" to "Fixed-arm", "Truss" to "Truss arm", "Telescopic" to "Telescopic arm", "Column ") To" columnar arm "(see 2.4.1, 2.4.1.1, 2.4.2 and 2.4.3, the.2010 edition of 2.4.1, 2.4.1.1, 2.4.2 and 2.4.3); --- Added three provisions note, respectively, on the column arm, jib structural characteristics were described, and the special configuration instructions (see 2.4.3, 2.4.4, and 2.5.1); --- Crane crane was redefined (see 2.5.2,.2010 version 2.5.2). This section uses the translation method identical with ISO 4306-2.2012 "Crane terminology Part 2. Mobile cranes." This section made the following editorial changes. --- In accordance with the preparation of GB/T 1.1-2009 format, the "range" added a chapter number, the order of the other chapters were extended; --- The scope of ISO 4306-2.2012 ".ISO 4306 provides the most commonly used in the field of cranes expressed in English, French and Russian Language "and replaced by the scope of Chapter 1 of this Part GB/T 6974 This section defines the most commonly used terms crane; --- To be consistent with the appellation of other cranes in our country, add the synonym "(tower arm)" behind the 2.4.3 column arm, hinged at 2.4.5 Add the synonym "(folding arm)" behind the arm. This part is proposed by China Machinery Industry Federation. This part of the Crane Standardization Technical Committee (SAC/TC227) centralized. This part of the drafting unit. Zoomlion Co., Ltd., Shenzhen Special Equipment Safety Inspection Institute. The main drafters of this section. Yang Wu, Li Jun, Luo Kai, painted Lexus, Yu Tao, Liu Songliang. This part replaces the standards previously issued as. --- GB/T 6974.6-1986; --- GB/T 6974.2-2010. Crane terminology Part 2. Mobile cranes1 ScopeThis part of GB/T 6974 defines the most commonly used terms crane. This section provides a variety of basic types of self-driven mobile crane terminology. GB/T 8498 describes excavators and other construction Excluding machinery.2 Terms and definitions2.1 General 2.1.1 Mobile crane mobilecrane Can be configured column (tower), with or without load can be run along the track-free surface, and rely on self-weight to maintain a stable boom type Heavy Machinery. 2.1.2 Crane configuration craneconfiguration The combination or arrangement of components and elements of a crane. Example Assembly of Booms (Number and Arrangement of Boom Jibs, Boom Jibs or Boom Jaws), Weights and Positions of Balancing Weight (Bracing Balance or Rear Balancing Heavy quantity and arrangement). 2.1.3 Crane ready for craneset-up Crane and its accessories before the operation and positioning of the preparatory conduct or preparation requirements. Note Crane preparation is included. --- Choose the ground for lifting operations; --- Level the ground, the job site enclosure, the job site closed and/or crane in place; --- Outrigger's location and settings; --- Balance weight settings; --- Set on the car. 2.1.4 Rated capacity ratedcapacity The maximum allowable load specified by the crane manufacturer, based on crane configuration and crane preparation. 2.1.5 Maximum rated weight maximumratedcapacity Crane maximum design load. Note. The maximum rated capacity as a crane basic technical parameters are often mentioned. 2.2 way of walking 2.2.1 Crawler crawler-mounted Crawler walking mobile cranes. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6974.2-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 6974.2-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6974.2-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6974.2-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6974.2-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6974.2-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
