GB/T 6113.101-2021 English PDFUS$1484.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6113.101-2021: Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus Status: Valid GB/T 6113.101: Historical versions
Similar standardsGB/T 6113.103 GB/T 6113.104 GB/T 6113.102 GB/T 6113.106 GB/Z 6113.404 GB/T 6113.105Basic dataStandard ID: GB/T 6113.101-2021 (GB/T6113.101-2021)Description (Translated English): Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L06 Word Count Estimation: 82,826 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 6113.101-2021: Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-1.Radio disturbance and immunity measuring apparatus -- Measuring apparatus ICS 33.100 CCSL06 National Standards of People's Republic of China Replaces GB/T 6113.101-2016 Radio disturbance and immunity measurement equipment and Measurement Methods Specification Part 1-1. Radio Disturbance and Immunity Measuring Equipment Measuring Equipment 2021-12-31 Released 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Basic characteristics of measurement receivers5 4.1 Overview 5 4.2 Input Impedance6 4.3 Sine wave voltage tolerance 6 4.4 Overall passband selectivity6 4.5 Bandwidth8 4.6 Frequency Tuning Tolerance 9 4.7 IF rejection ratio9 4.8 Image Frequency Rejection Ratio 9 4.9 Other spurious responses 9 4.10 Limitations of Intermodulation Effects 10 4.11 Measurement of receiver noise and internal spurious limitations 11 4.12 Measurement receiver RF emission limits 11 4.13 Equipment connected to the intermittent disturbance analyzer 11 5 Quasi-peak measurement receiver (frequency range 9kHz~1000MHz) 11 5.1 Overview 11 5.2 Impulse response 11 6 Peak measurement receiver (frequency range 9kHz~18GHz) 15 6.1 Overview 15 6.2 Charge and discharge time constant ratio 15 6.3 Overload factor 16 6.4 Impulse response 16 7 Average measurement receiver (frequency range 9kHz~18GHz) 16 7.1 Overview 16 7.2 Overload factor 16 7.3 Impulse response 17 8 RMS-average measurement receiver (frequency range 9kHz~18GHz) 19 8.1 Overview 19 8.2 Overload factor 19 8.3 Impulse response 20 9 Measurement receiver with amplitude probability distribution (APD) measurement function (frequency range 1GHz~18GHz) 22 10 Intermittent disturbance analyzer 23 10.1 Overview 23 10.2 Basic Features 23 10.3 Test Methods for Validation of Click Analyzer Performance 29 Appendix A (normative) Determination of the repetitive impulse response of quasi-peak measurement receivers and rms-average measurement receivers (see 3.6, 5.2.2, 8.2 and 8.3) 31 Appendix B (normative) Determination of the pulse generator spectrum (see 5.2, 6.4, 7.3 and 8.3) 35 Appendix C (normative) Accurate measurement of nanosecond pulse generator output (see 5.2, 6.4, 7.3 and 8.3) 36 Appendix D (normative) Influence of quasi-peak measurement receiver characteristics on impulse response (see 5.2.2) 38 Appendix E (normative) Response of average and peak measurement receivers (see 4.5) 39 Appendix F (normative) Performance check according to the exceptions defined in 5.4.3 Clicks in CISPR14-1.2016 47 Appendix G (Informative) Rationale for the APD Measurement Functional Specification 53 Appendix H (informative) Characteristics of quasi-peak measurement receivers 56 Appendix I (Informative) Example of Structure of EMI Receiver and Swept-Frequency Analyzer 57 Appendix J (normative) Requirements for the use of external preamplifiers for measuring receivers 59 Appendix K (normative) Calibration requirements for measuring receivers 69 Appendix L (normative) Verification of RF Pulse Amplitude 72 Reference 73 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. GB/T (Z) 6113 "Specifications for Radio Disturbance and Immunity Measurement Equipment and Measurement Methods" is the basic standard for electromagnetic compatibility. This document is part 1-1 of GB/T (Z) 6113.GB/T (Z)6113 has released the following parts. Part 1.Radio disturbance and immunity measuring equipment --- Part 1-1.Radio disturbance and immunity measuring equipment measuring equipment; --- Part 1-2.Coupling devices for the measurement of conducted disturbances of radio disturbance and immunity measurement equipment; --- Part 1-3.Radio disturbance and immunity measurement equipment auxiliary equipment disturbance power; --- Part 1-4.Radio disturbance and immunity measurement equipment radiated disturbance measurement antenna and test site; --- Part 1-5.Radio disturbance and immunity measurement equipment 5MHz~18GHz antenna calibration site and reference test site; --- Part 1-6.Radio disturbance and immunity measurement equipment EMC antenna calibration. Part 2.Methods of measurement of radio disturbance and immunity --- Part 2-1.Radio disturbance and immunity measurement methods Conducted disturbance measurement; --- Part 2-2.Radio disturbance and immunity measurement method disturbance power measurement; --- Part 2-3.Radio disturbance and immunity measurement methods Radiated disturbance measurement; --- Part 2-4.Radio disturbance and immunity measurement methods Immunity measurement; --- Part 2-5.Large-scale equipment disturbance emission site measurement. Part 3.Technical Report on Radio Disturbance and Immunity Measurements --- Part 3.Radio disturbance and immunity measurement technical report. Part 4.Uncertainty, Statistics and Limit Modeling --- Part 4-1.Uncertainty, Statistics and Limit Modeling Uncertainties for Standardized EMC Tests; --- Part 4-2.Uncertainty, statistics and limit modeling uncertainty of measuring equipment and facilities; --- Part 4-3.Uncertainty, statistics and limit modeling Statistical considerations for the determination of EMC compliance of batch products; --- Part 4-4.Uncertainty, statistics and limit modelling Complaint statistical and limit calculation models; --- Part 4-5.Uncertainty, statistical and limit modeling alternative conditions of use for test methods. This document replaces GB/T 6113.101-2016 "Radio Disturbance and Immunity Measurement Equipment and Measurement Methods Specification Part 1-1. Radio disturbance and immunity measurement equipment measurement equipment", compared with GB/T 6113.101-2016, except for structural adjustment and editorial changes In addition, the main technical changes are as follows. --- Deleted the term "symmetric voltage" and added 5 terms such as "calibration" (see Chapter 3, Chapter 3 of the.2016 edition); --- Increased the implementation and use of Gaussian filters (see 3.6 and Appendix L); --- Deleted the requirement to measure the shielding effectiveness of the receiver (see 4.8.1 of the.2016 edition); --- Modified the definition of the test signal for calibrating and verifying the impulse response of the average detector (see 7.3, 6.5 of the.2016 edition) --- Modified the definition of test signal for calibration and verification of rms-average detector impulse response (see 8.3,.2016 edition of 7.5); --- Increased the requirements for the use of an external preamplifier with a measuring receiver (see Appendix J); --- Increased the calibration parameters of the measuring receiver (see Appendix K); --- Added verification of RF pulse amplitude (see Appendix L). This document uses the translation method identically to CISPR16-1-1.2019 "Specification for Radio Disturbance and Immunity Measurement Equipment and Measurement Methods" Part 1-1.Radio Disturbance and Immunity Measuring Equipment Measuring Equipment". The Chinese documents that have a consistent correspondence with the international documents normatively cited in this document are as follows. ---GB 4343.1-2018 Electromagnetic Compatibility Requirements for Household Appliances, Power Tools and Similar Appliances Part 1.Emission (CISPR 14-1.2011, IDT) ---GB 4824-2019 Industrial, Scientific and Medical Equipment Radio Frequency Disturbance Characteristics Limits and Measurement Methods (CISPR11. 2016, IDT) ---GB/T 6113.201-2018 Specification for Radio Disturbance and Immunity Measurement Equipment and Methods Part 2-1.Disturbance and Immunity Degree measurement method Conducted disturbance measurement (CISPR16-2-1.2014, IDT) The following editorial changes have been made to this document. ---CIPR16-1-1.2019 Term 3.13 refers to CISPR16-1-4, this document adds this document in the reference; --- Corrected errors in CIPR16-1-1.2019 as follows. ● In E.5, "C and D frequency bands. 12.0dB (pulse repetition frequency 1000Hz)" is changed to "C and D frequency bands. 12.0dB (pulse repetition frequency 1000Hz)" repetition rate 100Hz)"; ● In Figure E.6 above, “fp≫Bimp” is changed to “fp≪Bimp”; ● In Figure E.7, “fp2≫Bimp” is changed to fp2≪Bimp; ● In Table F.1, in Test No. 10, “(see Table E2 and Note 1, 2×285ms > 20ms)” is changed to “(see Table E2 and Note 1, 2×285ms > 20ms)” Note 1, 285ms > 20ms)”. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Radio Interference Standardization Technical Committee (SAC/TC79). This document is drafted by. China Electronics Standardization Institute, CLP Kesiyi Technology Co., Ltd., Beijing Kehuan Century Electromagnetic Compatible Technology Co., Ltd., Xiamen Hainuoda Scientific Instrument Co., Ltd., China Institute of Metrology, Guangzhou Saibao Metrology and Testing Center Service Co., Ltd., the Fifth Electronic Research Institute of the Ministry of Industry and Information Technology, Southeast University, Hefei Product Quality Supervision and Inspection Research Institute, Beijing Radio Metrology and Testing Institute, Guangzhou Zhongtest Electronic Technology Co., Ltd., China Automotive Engineering Research Institute Co., Ltd., China Automotive Research Institute Automotive Inspection Center Heart (Tianjin) Co., Ltd., Guangzhou Chengzhen Electronic Technology Co., Ltd., Zhejiang Nuoyi Technology Co., Ltd., and the National Radio Monitoring Center Center, Dalian Product Quality Inspection and Testing Research Institute Co., Ltd., Xi'an University of Technology, Fujian Institute of Metrology, Nanjing Nat Telecom Subsidiary Co., Ltd., Zhongjiayuan (Beijing) Testing and Certification Co., Ltd., Ruifeng RF Technology (Shanghai) Co., Ltd., China Academy of Information and Communications Technology, Shenzhen Shenzhen Beitest Testing Technology Co., Ltd., Beijing Institute of Technology, China Electric Power Research Institute Co., Ltd., Jiangsu Institute of Metrology, Guangzhou Dongzhong Recognition South China Testing Technology Co., Ltd., Beijing Daze Technology Co., Ltd., Shenzhen Dongsheng RF Technology Co., Ltd., Shenzhen Heyou Technology Co., Ltd. Co., Ltd., Beijing Robosch Communication Technology Co., Ltd. The main drafters of this document. Cui Qiang, Xie Ming, Chen Yan, Fu Jun, Xu Jianhua, Zhu Wenli, Zhou Zhongyuan, Yang Xinchun, Ye Chang, Ma Weiyu, Yang Chunrong, Liu Enxiao, Wang Lindong, Huang Xuemei, Liu Xin, Li Nan, Zheng Yimin, Guo Yu, Xu Dan, Tang Xinggang, Xiao Nali, Li Rongming, Wang Xi, Shi Lei, Zhou Yi, Li Guanghua, Zhai Li, Li Ni, Li Baoting, Lu Yanhan, Liang Jiming, Li Lijia, Chu Rui, Zhang Jinku, Wan Changyong, Li Jin. The previous versions of the documents replaced by this document are as follows. ---First published in.2008 as GB/T 6113.101-2008, first revised in.2016; ---This is the second revision.IntroductionIn order to standardize electromagnetic compatibility measurements, consider measurement uncertainty and give background information related to measurements, and for electromagnetic compatibility product classification The standard formulation and revision lays the technical foundation, GB/T (Z) 6113 specifies the radio disturbance and immunity measurement equipment, measurement methods, measurement inaccuracy Model for determining technical requirements and calculation limits, which consists of four parts, the first part is the specification of radio disturbance and immunity measurement equipment; Part 2 is the specification for the measurement method of radio disturbance and immunity; Part 3 is the technical report on the measurement of radio disturbance and immunity; Part 4 Divided into uncertainty, statistics and limit modeling. Part 1 is further divided into 6 parts. --- Part 1-1.Measuring equipment. The purpose is to specify measuring equipment for the measurement of radio disturbances and special equipment for the measurement of intermittent disturbances. performance and characteristic requirements of the equipment. --- Part 1-2.Coupling device for the measurement of conducted disturbances. The purpose is to specify the auxiliary for the measurement of radio frequency disturbance voltage and disturbance current. Equipment characteristics and performance requirements. --- Part 1-3.Auxiliary equipment disturbance power. The purpose is to specify the characteristics and calibration of absorbing clamps for radio disturbance power measurement. Standard method requirements. --- Part 1-4.Antenna and test site for radiated disturbance measurement. The purpose is to specify radiated disturbance measurement antennas and test sites characteristics and performance requirements. --- Part 1-5.5MHz~18GHz antenna calibration site and reference test site. The purpose is to specify the antenna calibration site and Refer to the test site requirements. --- Part 1-6.EMC antenna calibration. The purpose is to specify the calibration procedure and related Require. Radio disturbance and immunity measurement equipment and Measurement Methods Specification Part 1-1. Radio Disturbance and Immunity Measuring Equipment Measuring Equipment1 ScopeThis document specifies the performance and characteristic requirements of measuring equipment for measuring radio disturbances, applicable to the frequency range from 9 kHz to 18 GHz. around. This document also provides requirements for special equipment for intermittent disturbance measurements. Note. According to IEC Guide 107, CISPR16-1-1 is the basic electromagnetic compatibility (EMC) standard used by IEC product committees. As IEC Guide 107 As stated, it is the responsibility of the Product Council to determine the applicability of EMC standards. CISPR and its sub-technical committees (corresponding to domestic SAC/TC79 technology Committee and its subcommittees) collaborate with these product committees in assessing the value of specific trials for their specific products. The above product committee It will correspond to the relevant domestic product technical committees. The requirements of this document apply to electromagnetic interference (EMI) receivers and spectrum analyzers. The term "measurement receiver" used in this document is Refers to both types of receivers, EMI receivers and spectrum analyzers (see also 3.7). The calibration requirements for measuring receivers are in accordance with Annex K. Please refer to CISPR16-2-1.2014 A1.2017, GB/T 6113.202-2018 or Appendix B in GB/T 6113.203-2020.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 4365-2003 Electrotechnical Terminology Electromagnetic Compatibility (IEC 60050(161)..1990 A1..1997 A2..1998, IDT) GB/T 6113.202-2018 Specification for Radio Disturbance and Immunity Measurement Equipment and Methods Part 2-2.Disturbance and Immunity Measurement Measurement method of disturbance power (CISPR16-2-2.2010, IDT) GB/T 6113.203-2020 Specification for Radio Disturbance and Immunity Measurement Equipment and Methods Part 2-3.Disturbance and Immunity Measurement Quantitative method for radiation disturbance measurement (CISPR16-2-3.2016, IDT) GB /Z 6113.3-2019 Specification for Radio Disturbance and Immunity Measurement Equipment and Measurement Methods Part 3.Radio Disturbance and Immunity Disturbance Measurement Technical Report (CISPR/T R16-3.2010 A1.2012 A2.2015,IDT) CISPR11.2015 A1.2016 A2.2019 Industrial, Scientific and Medical (ISM) Radio Frequency Equipment Radio Frequency Disturbance Characteristics Limits CISPR14-1.2016 Electromagnetic Compatibility Requirements for Household Appliances, Power Tools and Similar Appliances Part 1.Emissions (Electro- magnetic compatibility-Requirements for household appliances, electric tools and similar apparatus-Part 1.Emission) CISPR16-2-1.2014 A1.2017 Specification for Radio Disturbance and Immunity Measurement Equipment and Methods Part 2-1.Disturbance and ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6113.101-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 6113.101-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6113.101-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6113.101-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6113.101-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6113.101-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
