GB/T 5565.3-2017 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5565.3-2017: Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5565.3-2017	119	Add to Cart	3 days	Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures	Valid

Similar standards

GB/T 5567   GB/T 5563   GB/T 5564   GB/T 5568   GB/T 5565.2   GB/T 5565.1   

Basic data

Standard ID: GB/T 5565.3-2017 (GB/T5565.3-2017)
Description (Translated English): Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G42
Classification of International Standard: 23.040.70
Word Count Estimation: 6,673
Date of Issue: 2017-09-07
Date of Implementation: 2018-04-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 5565.3-2017: Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3. Bending tests at high and low temperatures ICS 23.040.70 G42 National Standards of People's Republic of China Rubber and plastic hoses and non-reinforced hoses Flexible and stiffness measurement Part 3. High temperature and low temperature bending test Part 3.Bendingtestsathighandlowtemperatures (ISO 10619-3.2011, IDT) 2017-09-07 Posted 2018-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

GB/T 5565 "rubber and plastic hoses and non-reinforced hose flexible and stiffness measurement" is divided into three parts. --- Part 1. Room temperature bending test; --- Part 2. Bending test below room temperature; --- Part 3. High temperature and low temperature bending test. This section GB/T 5565 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method is equivalent to using ISO 10619-3.2011 "rubber and plastic hoses and non-reinforced flexible and stiff hose test Volumes Part 3. High temperature and low temperature bending test ". The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows. --- GB/T 2941-2006 rubber physical test sample preparation and conditioning procedures (ISO 23529.2004, IDT) --- GB/T 7528-2011 Rubber and plastics hoses and hose assembly terms (ISO 8330.2007, IDT) --- GB/T 9573-2013 Rubber and plastics hoses and hose assemblies Hose size and hose assembly length measurement method (ISO 4671.2007, IDT) This part is proposed by China Petroleum and Chemical Industry Federation. This part of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35) centralized. This part of the drafting unit. Tianjin Ge Tesi Testing Equipment Technology Development Co., Ltd., Shenyang Rubber Research Institute Co., Ltd.. The main drafters of this section. Liu Ying, Wang Shuli. Rubber and plastic hoses and non-reinforced hoses Flexible and stiffness measurement Part 3. High temperature and low temperature bending test Warning --- personnel should use this part of the formal laboratory work experience. This section does not indicate all possible safety issues question. It is the user's responsibility to take appropriate safety and health measures and to ensure compliance with the requirements of the relevant state laws and regulations.

1 Scope

This section GB/T 5565 specifies the determination of the bending properties of rubber and plastic hoses and non-reinforced hoses, including bending the required stress Method, the temperature range of -60 ℃ ~.200 ℃. The characteristics of the device limit its application to rubber and plastic with an internal diameter not greater than 12.5 mm Material hose and non-reinforced hose.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 4671 Rubber and plastics hoses and hose assemblies Hose sizes and hose assemblies Length measurement methods (Rubberand plasticshosesandhoseassemblies-Methodsofmeasurementofthedimensionsofhosesandthe lengthsofhoseassemblies) ISO 8330 Rubber and plastics hoses and hose assemblies terms (Rubberandplasticshosesandhose assemblies-Vocabulary) ISO 23529 Rubber physical test methods - Sample preparation and conditioning procedures (Rubber-Generalproceduresforpre- paringandconditioningtestpiecesforphysicaltestmethods)

3 Terms and definitions

ISO 8330 defined and the following terms and definitions apply to this document. 3.1 Bending bending At specified temperatures, the straight-line sample is formed or applied force to make it arc-shaped process. 3.2 Flexible flexibility Hoses are easy to bend without any damage, such as bending, collapsing, cracking or cracking. For example, a hose can be bent around the mandrel. 3.3 Ting stiffness Hose bending resistance. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5565.3-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5565.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5565.3-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5565.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.