Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 5553-2007 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5553-2007: Surface active agents -- Determination of water repellency of waterproofing agents
Status: Valid

GB/T 5553: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 5553-2007209 Add to Cart 3 days Surface active agents -- Determination of water repellency of waterproofing agents Valid
GB/T 5553-1985199 Add to Cart 2 days Surface active agents--Textile auxiliaries--Method for determination of water repellency of waterproofing agents--Hydrostatic pressure test Obsolete

Similar standards

GB/T 5173   GB/T 6368   GB/T 6369   GB/T 5550   GB/T 5558   GB/T 5561   

Basic data

Standard ID: GB/T 5553-2007 (GB/T5553-2007)
Description (Translated English): Surface active agents -- Determination of water repellency of waterproofing agents
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G72
Classification of International Standard: 71.100.40
Word Count Estimation: 8,853
Date of Issue: 2007-08-13
Date of Implementation: 2008-02-01
Older Standard (superseded by this standard): GB/T 5553-1985; GB/T 5554-1985
Regulation (derived from): China National Standard Approval Announcement2007 No.8 (Total No.108)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the surfactant water repellent force assay. This standard applies to the use of hydrostatic testing equipment or water spray tester measured by surfactant water repellent fabric finishing ability to resist water penetration.

GB/T 5553-2007: Surface active agents -- Determination of water repellency of waterproofing agents


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Surface active agents. Determination of water repellency of waterproofing agents ICS 71.100.40 G72 National Standards of People's Republic of China Replacing GB/T 5553-1985, GB/T 5554-1985 Surfactants repellency of waterproofing agents assays Posted 2007-08-13 2008-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

At the same time instead of GB/T 5553-1985 "surfactant Textile Auxiliaries waterproofing agent waterproof capability by standard assays of the consolidated Hydrostatic test method "and GB/T 5554-1985" surfactant Textile Auxiliaries waterproofing agent waterproof assay Spray test. " This standard and GB/T 5553-1985 and GB/T 5554-1985 compared to the major differences are as follows. --- Standard Specification name as "surfactant repellency of waterproofing agents assays" --- Merge two national technical standards relevant sections of the same content. Appendix A of this standard is a normative appendix. The standard proposed by China Petroleum and Chemical Industry Association. This standard is under the jurisdiction of Chemical Industry Standardization Technical Committee surfactant. This standard was drafted. Shanghai Dyestuffs Research Institute Co., Ltd. Drafters of this standard. Xusu Mei, is Qi Gu. This standard was first published in 1985. Surfactants repellency of waterproofing agents assays

1 Scope

This standard specifies the surfactant repellency of waterproofing agents assay. This standard applies to the use of hydrostatic tester or water spray test measured by the fabric water repellent surfactant after finishing resist water penetration Ability.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, all subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, whether under this standard to encourage the parties to reach an agreement and research You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 139-2005 standard atmospheric and experimental textile thermostat Principle 3 3.1 Hydrostatic Test Method The size of the fabric after finishing by water repellent can withstand hydrostatic pressure of water to reflect the time to penetrate the fabric suffered resistance. In the present Under standard conditions, the sample side of the fabric to withstand a gradual increase of pressure until the other side of the fabric there are three water penetration so far, remember Pressure values recorded at this time, that is water repellent waterproof force. The resulting hydrostatic values are expressed in kPa. 3.2 Spray test On the sample surface tension of water to spray, so to produce a wetted pattern. The size of the pattern depends on the waterproofing agent waterproof large small. The wet mode standard spray test level chart compares to assess the force of its water level.

4 Reagents or materials

4.1 Test fabric material 4.1.1 cotton poplin (65/35). 602/602 double strand, a density of 12070; 4.1.2 khaki cotton (65/35). 452/21 double strand single line density of 13,570. Note. according to the specific need to use other fabrics. 4.2 Preparation of the sample water repellent Preparation of water repellent padding solution. Weigh waterproofing agent several grams (weighing accuracy 0.1g). Depending on the formulation and preparation of various types of water repellent Steps. Should Extemporaneous. Padding 4.3 waterproofing agent Process. Second Baptist Second rolling (water repellent formulated liquid) → drying → intermediate baking. Mangle. general should be controlled at (60 ± 5)%. Intermediate drying temperature and time. Usually about 100 ℃, 1min. Baking temperature and time. depending on the performance of waterproofing agent and selected. 4.4 Sampling and Sample Size 4.4.1 Static pressure test. The specimen should be minimal touch to avoid folding force, without any way of processing (such as iron). In big Take place in different parts of the sample 5. Do not have a deep crease sampling. Sample Size. 20cm × 20cm square. 4.4.2 Spray test. The specimen should be minimal touch to avoid folding force, without any way of processing (such as iron). From the big test
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5553-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5553-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5553-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5553-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5553-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5553-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.