GB/T 5464-2010 English PDF

US$494.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5464-2010: Non-combustibility test method for building materials
Status: Valid

GB/T 5464: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5464-2010	494	Add to Cart	4 days	Non-combustibility test method for building materials	Valid
GB/T 5464-1999	799	Add to Cart	3 days	Non-combustibility test method of building materials	Obsolete
GB/T 5464-1985	RFQ	ASK	3 days	Non-combustibility test method of building materials	Obsolete

Similar standards

GB/T 9978.1   GB/T 9978.8   GB/T 7633   GB 5908   GB/T 9978.2   

Basic data

Standard ID: GB/T 5464-2010 (GB/T5464-2010)
Description (Translated English): Non-combustibility test method for building materials
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C82
Classification of International Standard: 13.220.50
Word Count Estimation: 25,288
Date of Issue: 2010-09-26
Date of Implementation: 2011-02-01
Older Standard (superseded by this standard): GB/T 5464-1999
Quoted Standard: GB/T 16839.2-1997; ISO 13943; EN 13238
Adopted Standard: ISO 1182-2002, IDT
Regulation (derived from): National Standard Approval Announcement 2010 No.6 (Total No.161)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the conditions under specific test methods for non-flammable component homogeneous building products and construction products, mainly non-homogeneous group. See Appendix accuracy of the test method A.

GB/T 5464-2010: Non-combustibility test method for building materials

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-combustibility test method for building materials ICS 13.220.50 C82 National Standards of People's Republic of China Replacing GB/T 5464-1999 Test methods for non-flammable building materials (ISO 1182.2002, Reactiontofiretestsforbuildingproducts- Non-combustibilitytest, IDT) Issued on. 2010-09-26 2011-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Test apparatus 1 4.1 Overview 1 4.2 furnace, stents and airflow cover 2 4.3 sample holder and insertion device 2 4.4 Thermocouple 3 4.5 contact thermocouple 4 4.6 viewer 4 4.7 Balances 4 4.8 Regulator 4 4.9 regulating transformer 4 4.10 electrical instrumentation 4 4.11 Power controller 5 4.12 logger 5 4.13 Timer 5 4.14 drying dish 5 5 Sample 6 5.1 Summary 6 5.2 Sample Preparation 6 Number of samples 6 5.3 6 6 conditioning Step 6 Test 7 7.1 Test Environment 6 7.2 Test preparation program 6 7.3 Calibration Procedure 7 7.4 Standard test procedure 10 7.5 observed during the test 11 8 results presentation 11 8.1 mass loss 11 8.2 Flame 11 8.3 Temperature Rise 11 9 11 test reports Accuracy Appendix A (informative) Test Method 12 Typical Design 14 Annex B (informative) Test Device Annex C (normative) Additional thermocouple 17 Annex D (informative) Temperature records 18

Foreword

This standard uses the translation method identical with ISO 1182.2002 "Reaction to fire test of building materials incombustible test" (in English). For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Deleted directory and international standards foreword. This standard replaces GB/T 5464-1999 "Test method for non-flammable building materials." This standard compared with GB/T 5464-1999 The main changes are as follows. --- The modifications were made (1999 Edition Chapter 1, Chapter 1 edition) the scope of the standard; --- Increasing the content files normative references, terms and definitions (Excerpts of Chapters 2 and Chapter 3); --- Volume of the sample was changed to (76 ± 8) cm3 (1999 Edition 3.1.2, this version 5.1); --- Increased state regulation of the sample program, the first test shall EN13238 state regulation, then placed in an oven dry Dry (3.3, Chapter 6, 1999 edition); --- Removed furnace tube total wall thickness requirements (1999 version 4.2.1, this version 4.2.1); --- Remove the outer diameter of the cylindrical tube of the claim and revised the furnace between the tube and the cylindrical tube filler density requirements (1999 Edition 4.2.3, and 4.2.2 edition Appendix B); --- Increased its bulk sample holder requirements (see 4.3.4); --- Increased contact thermocouple requirements (see 4.5); --- Increased balance requirements (see 4.7); --- Part of the test increased environmental requirements (1999 version 4.5.1, this version 7.1); --- Part of the increase oven temperature balancing requirements (1999 version 6.5, this version 7.2.4); --- Modify the furnace wall temperature requirements, increasing the temperature of the furnace wall and the furnace temperature calibration procedure (1999 edition 6.6, this version 7.3); --- Remove the body of the standard relating to specimen center thermocouple, center of the sample temperature, the specimen surface thermocouple temperature of the sample surface Content, put it in Appendix C (1999 edition 4.1.4,4.4.4,4.4.5,7.1.7,7.1.8,7.2.3,8.1.1,8.1.2, 8.2.2,8.3.2, this version 4.1.5, Appendix C); --- End of the test time to reach the final thermocouple temperature equilibrium time or duration of the test 60min (version 7.1.8 1999, this Version 7.4.7 and D.2); --- Delete the contents of evaluation criteria (1999 edition Appendix A); --- Delete the contents of the commentary (1999 edition Appendix B); --- Modified "test report summary table" content, and content as the content of the revised "Test Report" (1999 edition Appendix C, Excerpts Chapter 9); --- Increase the informative appendix "accuracy of the test method" (see Appendix A); --- Increase the informative appendix "typical design test device" (see Appendix B); --- Increased normative appendix "Additional thermocouple" (see Appendix C); --- Increase the informative Appendix "Temperature Record" (see Appendix D). Appendix C of this standard is a normative appendix, Appendix A, Appendix B and Appendix D are informative appendices. The standard proposed by the People's Republic of China Ministry of Public Security. This standard by the National Standardization Technical Committee for fire protection material Technical Committee (SAC/TC113/SC7) centralized. This standard was drafted. Ministry of Public Security of Sichuan Fire Research Institute. The main drafters. Zhang Yu, YAO Jian, Deng Xiaobing. This standard replaces the standards previously issued as follows. --- GB/T 5464-1985, GB/T 5464-1999. Test methods for non-flammable building materials

1 Scope

This standard specifies the test methods for non-flammable and non-homogeneous building products homogeneous major component in building products under certain conditions. The accuracy of the test method in Appendix A.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 16839.2-1997 thermocouple Part 2. Tolerances (idt IEC 60584-2. 1982) ISO 13943 Fire Safety Glossary The general rule for reaction to fire test procedures and conditioning substrate selected EN13238 building products

3 Terms and Definitions

Established in ISO 13943 and the following terms and definitions apply to this standard. 3.1 Building products buildingproduct Including building materials, components or component installation, structure, composition, and other related information. 3.2 Building materials buildingmaterial Several single substance or mixture of substances uniformly dispersed, e.g., metal, stone, wood, concrete, or containing uniformly distributed glue polymerization Mineral matter, such as cotton. 3.3 Loose fill material loosefilmaterial The shape of the material is not fixed. 3.4 Homogeneous product homogeneousproduct Article or the entire interior of the article made of a single material having a uniform density and composition. 3.5 Non-homogeneous product non-homogeneousproduct Homogeneous product does not meet the definition of products. Of one or more primary and/or secondary component. 3.6 The main component substantialcomponent A non-homogeneous material constituting a significant portion of the article, single-level density ≥1.0kg/m2 or a thickness of a layer of material may ≥1.0mm As a major component.

4 test device

4.1 Overview 4.1.1 The test device shall satisfy the conditions specified in 7.1. A typical furnace design, see Appendix B. Other furnace set to meet 7.1 Count can be used. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5464-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5464-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5464-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5464-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5464-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5464-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.