GB/T 7633-2008 PDF EnglishUS$145.00 · In stock · Download in 9 seconds
GB/T 7633-2008: Fire resistance tests -- Door and shutter assemblies Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 7633: Historical versions
Similar standardsGB/T 7633-2008: Fire resistance tests -- Door and shutter assemblies---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT7633-2008GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.220.50 C 82 Replacing GB/T 7633-1987 Fire Resistance Tests - Door and Shutter Assemblies (ISO 3008.2007, MOD) Issued on. OCTOBER 8, 2008 Implemented on. MAY 1, 2009 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1.Scope... 6 2.Normative References... 7 3.Terms and Definitions... 7 4.Test Equipment... 10 5.Test Conditions... 10 6.Test Specimen... 10 7.Installation of Test Specimen... 12 8.Conditioning of Test Specimen... 16 9.Application of Instrumentation... 16 10.Test Procedure... 22 11.Judgment Condition... 24 12.Test Report... 24 13.Field of Direct Application of Test Results... 25 Appendix A (Informative) Comparison List of Chapter and Article Numbers between ISO 3008.2007 and This Standard... 60 Appendix B (Informative) Technical Differences between this Standard and ISO 3008.2007 and Their Reasons... 62 Appendix C (Informative) Conditioning Requirements for Supporting Constructions... 65 Appendix D (Informative) Estimation of Radiant Heat Flux Using Measured Surface Temperature and the Stefan-Boltzmann Law... 67 Bibliography... 70ForewordThis standard is modified in relation to "Fire-resistance Tests - Door and Shutter Assemblies" (ISO 3008 2007) (English edition). This standard is redrafted according to ISO 3008.2007.For the convenience of comparison, the "Comparison List of Chapter and Article Numbers between ISO 3008.2007 and This Standard" is listed in Appendix A. Considering China's national conditions, some changes are made in this standard at adopting ISO 3008.2007.The relevant technical differences have already been provided in the text and marked with perpendicular single line on the margin of relevant clauses. “Technical Differences between this Standard and ISO 3008.2007 and Their Reasons” are provided in Appendix B for reference. For the convenience of use, the following editorial changes of ISO 3008.2007 are made in this standard. --- "this international standard" is replaced by "this standard"; --- the comma "," used as the decimal point was replaced by the decimal point ". "; --- the foreword and introduction in ISO 3008.2007 are deleted. This standard replaces "Fire Resistance Tests - Door and Shutter Assemblies" (GB/T 7633-1987). Compared with GB/T 7633-1987, the main changes in this standard are as follows. --- the content of "Caution" is added to inform the users of matters concerned to be noticed (in front of the "Scope" in this edition); --- the chapter of "Scope" is added to further define the applicable object of this standard (Chapter 1 in this edition); --- the chapter of "Normative References" is added (Chapter 2 in this edition); --- the chapter of "Terms and Definitions" is added (Chapter 3 in this edition); --- the requirements of test equipment are modified (Chapter 1 in 1987 edition and Chapter 4 in this edition); --- test conditions are modified (Chapter 2 & Chapter 3 in 1987 edition and Chapter 5 in this edition); --- the requirements of test specimen are modified, and the relevant clauses are rearranged (Chapter 4 in 1987 edition and Chapter 6 in this edition); --- "design of test specimen" is added (see Section 6.3); --- "verification" is added (see Section 6.5); --- the installation requirements of test specimen are modified and arranged as an independent chapter (Section 4.4 in 1987 edition and Chapter 7 in this edition); --- the conditioning requirements are changed to adjustment and arranged as an independent chapter (Section 4.5 in 1987 edition and Chapter 8 in this edition); --- "Application of Instrumentation" is added (the Chapter 6 in 1987 edition is modified and changed to Chapter 9 in this edition); --- the test procedures are modified (Chapter 5 in 1987 edition and Chapter 10 in this edition); --- the judgment conditions are modified (Chapter 7 in 1987 edition and Chapter 11 in this edition); --- the requirements of test report content are modified (Chapter 8 in 1987 edition and Chapter 12 in this edition); --- "Field of Direct Application of Test Results" is added (see Chapter 13); --- "Comparison List of Chapter and Article Numbers between ISO 3008.2007 and This Standard" is added (see Appendix A); --- "Technical Differences between this Standard and ISO 3008.2007 and Their Reasons" is added (see Appendix B); --- normative appendix "Conditioning Requirements for Supporting Constructions" is added (see Appendix C); --- informative appendix "Estimation of Radiant Heat Flux Using Measured Surface Temperature and the Stefan-Boltzmann Law" is added (see Appendix D). In this standard, Appendix C is normative while Appendixes A, B and D are informative. This standard was proposed by the Ministry of Public Security of the People's Republic of China. This standard is under the jurisdiction of The Eighth Subcommittee of National Technical Committee on Fire Protection of Standardization Administration of China (SAC/TC 113/SC 8). Drafting organization of this standard. Tianjin Fire Control Institute of Ministry of Public Security. Participating drafting organization of this standard. Shenzhen Peng Ji-Security Inc. Chief drafting staff of this standard. Zhang Xianghui, Bai Shuying, Zhao Huali, Han Weiping, Cao Wenhong, Huang Wei, Qian Tao, Xie Fenglan, Liu Xiaohui, Yu Zuofu. The previous edition of the standard replaced by this standard is as follows. --- GB/T 7633 1987. Fire Resistance Tests - Door and Shutter Assemblies Caution. the attention of all persons concerned with managing and carrying out this fire-resistance test is drawn to the fact that fire testing may be hazardous and that there is a possibility that toxic and/or harmful smoke and gases may be evolved during the test. Mechanical and operational hazards may also arise during the construction of the test elements or structures, their test and disposal of test residues. Therefore, an assessment of all potential hazards and risks to health shall be made and safety precautions shall be identified and provided. Appropriate training shall be given to relevant personnel. Laboratory personnel shall ensure that they follow written safety instructions at all times. 1.Scope This standard specifies the fire resistance test method for the door and shutter assemblies installed at the opening of the vertical separating members, such as. 2.Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. 3.Terms and Definitions For the purposes of this standard, the terms and definitions specified in GB/T 5907 and GB/T 9978.1 as well as those listed below apply. 4.Test Equipment Instrumentation of heat flux from the unexposed surface of test specimens shall be made as described in Article 9.3.2. 5.Test Conditions The temperature and pressure conditions in the test furnace shall meet the requirements of GB/T 9978.1. 6.Test Specimen The test specimen shall be manufactured according to the method specified in GB/T 9978.1.The material, manufacturing process, splicing and installation methods of test specimen shall be fully representative of practical use conditions. 7.Installation of Test Specimen The fire resistance of the supporting construction shall not be lower than that of the test specimen, and shall not be determined during the test of test specimen. 8.Conditioning of Test Specimen Where some product standards require mechanical performance test before the start of the fire resistance test, test shall be carried out by reference to the requirements of corresponding product standard. 9.Application of Instrumentation The measurement of heat-flux from the unexposed surface of specimens shall be made by an instrument complying with the following specifications. The measurement shall be taken at the following positions. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 7633-2008 be delivered?Answer: The full copy PDF of English version of GB/T 7633-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 7633-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7633-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 7633-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 7633-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7633-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 7633-2008?A step-by-step guide to download PDF of GB/T 7633-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 7633-2008". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
