GB/T 5338.4-2023 English PDF

US$789.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5338.4-2023: Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5338.4-2023	789	Add to Cart	6 days	Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk	Valid

Similar standards

GB/T 1413   GB/T 3220   GB/T 2934   GB/T 5338.5   GB/T 1835   GB/T 5338.2   

Basic data

Standard ID: GB/T 5338.4-2023 (GB/T5338.4-2023)
Description (Translated English): Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A85
Classification of International Standard: 55.180.10
Word Count Estimation: 39,380
Date of Issue: 2023-11-27
Date of Implementation: 2024-03-01
Older Standard (superseded by this standard): GB/T 17274-1998
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 5338.4-2023: Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 55:180:10 CCSA85 National Standards of People's Republic of China Replace GB/T 17274-1998 Series 1 container technical requirements and test methods Part 4: Unpressurized dry bulk containers (ISO 1496-4:1991,MOD) Published on 2023-11-27 2024-03-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

PrefaceⅠ Introduction III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Dimensions and ratings 2 5 Design requirements 3 6 test 7 Appendix A (normative) Strength test instructions for various types and sizes of unpressurized dry bulk containers17 Appendix B (informative) Location of loading port of box-type unpressurized dry bulk container 29 Appendix C (Normative) Fork slot dimensions 31 Reference 33

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 4 of GB/T 5338 "Technical Requirements and Test Methods for Series 1 Containers": GB/T 5338 has been released The following sections are included: ---Part 1: General containers; ---Part 2: Insulated containers; ---Part 4: Unpressurized dry bulk containers; ---Part 5: Platform and rack containers: This document replaces GB/T 17274-1998 "Series 1: Technical Requirements and Test Methods for Unpressurized Dry Bulk Containers" and is consistent with Compared with GB/T 17274-1998, in addition to structural adjustments and editorial changes, the main technical changes are as follows: a) The container type and code are changed (see Table 1, Table 1 of GB/T 17274-1998); b) Changed the minimum internal dimensions (see 4:2, 4:2 of GB/T 17274-1998); c) Added content related to 1EEE, 1EE, and 1CCC model containers (see 4:2, 5:2:1, 5:8:3, 5:10:2, 6:2, 6:3, 6:4, 6:5, 6:6, 6:12, 6:18, Table 3 and Table A:1, 4:2, 5:2:1, 5:8:3, 5:10:2, 6:2, 6:3, 6:4, 6:5 of GB/T 17274-1998 6:6, 6:12, 6:18, Table 3 and Table A:1); d) Added technical contents such as 1EEE and 1EE box bottom structure, intermediate corner pieces, door switch, etc: (see 5:3:5, 5:8:2); e) Change "funnel" to "scoop" (see 5:7, 6:14 and 6:15, 5:7, 6:14 and 6:15 of GB/T 17274-1998); f) The classification of "container model" has been changed, and 1EEE, 1EE, and 1CCC models have been added (see Table 2, GB/T 17274-1998 Table 2); g) Changed the requirements for the setting of fork slots and added empty box fork slots (see 5:10:1:1, 5:10:1:1 of GB/T 17274-1998); h) The installation and test requirements for wall-grabbing or similar devices are deleted (see 5:10:2 and 6:13 of GB/T 17274-1998); i) The test content has been changed, and the technical requirements and test methods for 45ft containers have been added (see Chapter 6, GB/T 17274-1998 Chapter 6); j) The content of the fork lift test has been changed, and the situation when setting the empty box fork slot has been added (see 6:12:2:2, GB/T 17274-1998 6:12:2:2); k) Changed all strength test diagrams and related test data and added related diagrams of 1EEE and 1EE box container types, At the same time, the schematic diagrams of A11, A12, A13, and A14 regarding fastening have been deleted (see Appendix A, GB/T 17274-1998) Appendix A); l) Deleted the specific requirements for the load transfer area of the container bottom structure (see Appendix B of GB/T 17274-1998); m) Changed the empty box fork slot dimensions of the container, adding 1EEE, 1EE, 1AAA, 1AA, 1A, 1AX, 1BBB, 1BB, 1B and 1BX type container empty container fork groove dimensions (see Appendix C, Appendix C of GB/T 17274-1998); n) Delete the size requirements for the grab groove (when there is a grab groove) (see Appendix D of GB/T 17274-1998); o) The dimensions of the gooseneck slot (when equipped with a gooseneck slot) are deleted (see Appendix E of GB/T 17274-1998): This document is modified to adopt ISO 1496-4:1991 "Series 1 Container Technical Requirements and Test Methods Part 4: Unpressurized Dry Bulk Cargoes" container": The technical differences between this document and ISO 1496-4:1991 and their reasons are as follows: ---The contents of Table 1 have been changed and the corresponding contents have been updated according to GB/T 1836-2017 (see Table 1); ---Replaced ISO 6346 (see Table 1, 5:1:2) with the normatively quoted GB/T 1836 to adapt to my country's technical requirements; ---Replaced ISO 830 (see Chapter 3) with the normatively quoted GB/T 1992 to adapt to my country's technical requirements; ---Replaced ISO 668:2020 (see 4:1, 4:3, 5:3:2, 5:10:2, 6:1:6) with normatively cited GB/T 1413-2023, to Adapt to my country’s technical requirements; ---The technical content of the minimum internal dimensions has been changed, because ISO 1496-1:2013 and ISO 668:2020 have added 1EEE, 1EE, 1CCC type container and dimensions (see 4:2); ---Added 1EEE, 1EE, and 1CCC type containers due to ISO 668:2020 adding 1EEE, 1EE, and 1CCC type containers (see 4:2, 5:2:1, 5:8:3, 5:10:2, 6:2, 6:3, 6:4, 6:5, 6:6, 6:12 and 6:18); ---Changed the content of rated quality, in accordance with ISO 668:2020 (see 4:3); ---Replaced ISO 1161 (see 5:1:3, 5:2:1, 6:1:6, 6:2:2) with normatively cited GB/T 1835 to adapt to our country's technology Require; ---Added 1EEE, 1EE, 1CCC container bottom structure, middle corner pieces, door switches and other technical contents, mainly based on The latest requirements of GB/T 1836 and ISO 1496-1 (see 5:3:6, 5:8:2); ---Changed the setting requirements for slots, according to ISO 1496-1:2013 (see 5:10:1:1); ---Deleted the setting and test requirements for wall-grabbing or similar devices, and adjusted the corresponding bar serial number and test according to ISO 1496-1:2013 serial number; ---Added technical requirements and test methods for 45ft containers because ISO 668:2020 has added 45ft containers (see Chapter 6); ---Changed all strength test diagrams and related test data in Appendix A and added related diagrams for 1EEE and 1EE containers Figure, while deleting the schematic diagrams of A11, A12, A13, and A14, according to ISO 1496-1:2013 (see Appendix A); ---Deleted Appendix B, Appendix D, and Appendix E of ISO 1496-4:1991, according to ISO 1496-1:2013; ---Increased the empty box fork slot dimensions of 1EEE, 1EE, 1AAA, 1AA, 1A, 1AX, 1BBB, 1BB, 1B and 1BX containers, According to ISO 1496-1:2013 (see Appendix C, Appendix C of ISO 1496-4:1991); ---Added 1EEE and 1EE container loading port location diagram, according to ISO 1496-1:2013 (see Appendix B, ISO 1496-4: Appendix F of:1991): The following editorial changes have been made to this document: ---Incorporated ISO 1496:1991/Amd1:1994 Amendment 1 and ISO 1496:1991/Cor1:2006 Technical Corrigendum 1 Content, the outer margin of the terms involved is marked with a vertical double line (|); ---Deleted some notes of ISO 1496-4:1991; --- Considering that there should be no requirement clauses in the scope, adjust 1:4 of ISO 1496-4:1991 to 5:1:2: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed and coordinated by the National Container Standardization Technical Committee (SAC/TC6): This document was drafted by: Water Transport Research Institute of the Ministry of Transport, Nantong CIMC Special Transportation Equipment Manufacturing Co:, Ltd:, Guangzhou Railway Staff Industrial and Technical College, COSCO Shipping Container Lines Co:, Ltd:, China Railway Container Lines Co:, Ltd:, CIMC Container Holdings Co:, Ltd: company: The main drafters of this document: Deng Yanjie, Li Aihua, Zhao Jieting, Wu Yi, Lu Xinlin, Zhou Shiping, Li Wenhui, Jin Jing, Li Jichun, and Wang Jing: The previous versions of the documents replaced by this document are as follows: ---GB/T 17274, first released in:1998:

Introduction

Series 1 containers are international standard containers that are circulated around the world: The standardization and standardization of their design, production, and inspection are crucial: important: In order to standardize and promote the development of Series 1 container transportation, ISO has formulated ISO 1496 "Technical Requirements and Tests for Series 1 Containers": "Test Methods" series of standards, my country has carried out corresponding international standard transformation work to provide technical support for the development of my country's container industry: GB/T 5338 "Technical Requirements and Test Methods for Series 1 Containers" is intended to guide and standardize the design, production and production of Series 1 containers: Production, inspection and transportation, consisting of five parts: ---Part 1: General containers: The purpose is to specify the technical requirements and test methods for Series 1 general cargo containers: ---Part 2: Insulated containers: The purpose is to specify the technical requirements and test methods for Series 1 insulated containers: ---Part 3: Liquid, gas and pressurized dry bulk tank containers: The purpose is to specify Series 1 liquids, gases and pressurized dry powders Technical requirements and test methods for cargo tank containers: ---Part 4: Unpressurized dry bulk containers: The purpose is to specify the technical requirements and tests for Series 1 unpressurized dry bulk containers method: ---Part 5: Platform and rack containers: The purpose is to specify the technical requirements and testing of Series 1 platform and rack-mounted containers: test method: Series 1 container technical requirements and test methods Part 4: Unpressurized dry bulk containers

1 Scope

1:1 This document specifies the dimensions and ratings, design requirements and test methods for Series 1 unpressurized dry bulk containers: 1:2 Series 1 unpressurized dry bulk containers are suitable for international circulation, as well as road, rail and sea transportation, including among these modes of transportation Intermodal transportation: Since the density and mobility of various dry bulk cargoes vary greatly, containers that comply with this document may not necessarily be suitable for all dry bulk cargoes: Transportation of goods: Therefore, unless otherwise specified, all requirements specified in this document are minimum requirements: 1:3 The container types applicable to this document are shown in Table 1: Table 1 Container types Code a Box group code a B Unpressurized dry bulk cargo, box container BU Pressurized and unpressurized dry bulk tank containers (dry cargo) bucket container Pressureless tank container NH NN a According to Appendix E in GB/T 1836-2017: This document does not include requirements for ventilation and ventilation facilities:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 1413-2023 Series 1 Container Classification, Dimensions and Rated Mass (ISO 668:2020, IDT) GB/T 1835 Series 1 Container corner fittings and intermediate corner fittings specifications (GB/T 1835-2023, ISO 1161:2016, MOD) GB/T 1836 Container codes, identification and marking (GB/T 1836-2017, ISO 6346:1995, IDT) GB/T 1992 Container Terminology (GB/T 1992-2023, ISO 830:1999, MOD)

3 Terms and definitions

The terms and definitions defined in GB/T 1992 and the following apply to this document: 3:1 It is used to transport solid dry bulk cargo and can withstand the stress caused by loading, unloading and transportation movements during the transportation of unpackaged solid dry bulk cargo: The load generated is a container with loading and unloading openings and related accessories: [Source: GB/T 1992-2023,4:2:2:3:1] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5338.4-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5338.4-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5338.4-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5338.4-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.