GB/T 5338.2-2023 English PDF

US$744.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5338.2-2023: Series 1 freight containers - Specification and testing - Part 2: Thermal containers
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5338.2-2023	744	Add to Cart	5 days	Series 1 freight containers - Specification and testing - Part 2: Thermal containers	Valid

Similar standards

GB/T 1413   GB/T 3220   GB/T 2934   GB/T 5338.5   GB/T 1835   GB/T 5338.4   

Basic data

Standard ID: GB/T 5338.2-2023 (GB/T5338.2-2023)
Description (Translated English): Series 1 freight containers - Specification and testing - Part 2: Thermal containers
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A85
Classification of International Standard: 55.180.10
Word Count Estimation: 42,438
Date of Issue: 2023-09-07
Date of Implementation: 2024-04-01
Older Standard (superseded by this standard): GB/T 7392-1998
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 5338.2-2023: Series 1 freight containers - Specification and testing - Part 2: Thermal containers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 55.180.10 CCSA85 National Standards of People's Republic of China Replace GB/T 7392-1998 Series 1 container technical requirements and test methods Part 2.Insulated Containers Part 2.Thermalcontainers Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

Preface III Introduction V 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Category 3 5 mark 4 6 Dimensions and rated mass 4 7 Design requirements 5 8 test 8 9 Electrical equipment for insulated containers15 Appendix A (Normative) Cooling water pipe joint requirements 17 Appendix B (informative) Mounting frame 20 Appendix C (normative) Temperature measurement point 21 Appendix D (normative) Wiring phase sequence on plugs and sockets in insulated containers 23 Appendix E (Normative) Four-core electrical plug and socket (380/400V, 50/60Hz, 32A) 24 Appendix F (informative) Insulated container power supply 28 Appendix G (Normative) General requirements for 220V and dual voltage equipment29 Appendix H (informative) MRU container equipment mounting (optional generator set) 30 Appendix I (informative) Aging of polyurethane foam 31 Reference 35

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 2 of GB/T 5338 "Technical Requirements and Test Methods for Series 1 Containers". GB/T 5338 has been released The following sections are included. ---Part 1.General containers; ---Part 2.Insulated containers; ---Part 4.Unpressurized dry bulk containers; ---Part 5.Platform and rack containers. This document replaces GB/T 7392-1998 "Series 1.Technical Requirements and Test Methods for Insulated Containers" and is consistent with Compared with GB/T 7392-1998, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Changes to insulated containers, refrigerated containers, built-in mechanical refrigeration/heating containers, built-in, external, partitions, and fixing bolts Definition of nail (see 3.1, 3.2, 3.4, 3.8, 3.9, 3.11, 3.18, 3.1, 3.2, 3.3, 3.4, 3.9, 3.10 of GB/T 7392-1998, 3.12, 3.19); b) Added hanging frame, air adjustment, loading line, T-shaped floor, new air outlet, water trap, vacuum valve, defrost drainer, new insulated container, Terms and definitions for high-temperature environments and aging insulated containers (see 3.3, 3.6, 3.12, 3.13, 3.14, 3.15, 3.16, 3.17, 3.20, 3.21, 3.22); c) Delete the terms refrigerated and heated containers, refrigerated and heated containers with air conditioning or air conditioning devices, top air duct, bottom air duct and Definition (see 3.6, 6.7, 3.13, 3.14 of GB/T 7392-1998); d) The classification table of insulated containers has been changed (see Chapter 4, Chapter 4 of GB/T 7392-1998); e) The marking content has been changed, and the loading line marking requirements and the marking requirements for the insulated box with a new air outlet device have been added (see Chapter 5, Chapter 5 of GB/T 7392-1998); f) Added external reference dimensions (see Table 2); g) Changed the requirements for internal dimensions and minimum internal dimensions (see 6.2, 6.2 of GB/T 7392-1998); h) The strength requirements for insulated containers have been changed (see 7.1.1, 7.1.1 of GB/T 7392-1998); i) The load-carrying capacity requirements of insulated containers under operating conditions have been changed (see 7.1.4, 7.1.4 of GB/T 7392-1998); j) The area of the load transfer area at the bottom of the insulated container has been changed (see 7.3.2.1, 7.3.2.1 of GB/T 7392-1998); k) The design requirements for the load transfer area at the bottom of the insulated container have been changed [see 7.3.2.4, 7.3.2.4 of GB/T 7392-1998]; l) The hygiene requirements for insulated containers have been changed (see 7.8, 7.8 of GB/T 7392-1998); m) Changed the requirements for fork grooves (see 7.9.1, 7.9.1 of GB/T 7392-1998); n) The requirements for gooseneck grooves have been changed (see 7.9.2, 7.9.2 of GB/T 7392-1998); o) Changed the requirements for water pipe joints (see 7.9.4, 7.9.4 of GB/T 7392-1998); p) Changed the requirements for installation facilities of refrigeration equipment (see 7.9.5, 7.9.6 of GB/T 7392-1998); q) Added fresh air control requirements, humidity adjustment requirements, loading line requirements, floor requirements, and air circulation system requirements (see 7.9.7, 7.9.8, 7.9.9, 7.9.10, 7.9.11); r) Changed the dimensional requirements in the test (see 8.1.4, 8.1.5 of GB/T 7392-1998); s) Deleted the specific test methods of Test 1~Test 12 (see 8.2~8.13 of GB/T 7392-1998); t) Added requirements for Test 1 to Test 12 (see 8.1.5); u) Changed the requirements for air tightness test (see 8.2, 8.14 of GB/T 7392-1998); v) The methods and requirements of the heat leakage test have been changed (see 8.3, 8.15 of GB/T 7392-1998); w) The test conditions, methods and requirements for the performance test of insulated containers of mechanical refrigeration units (MRU) under refrigeration conditions have been changed. (See 8.4, 8.16 of GB/T 7392-1998); x) Added the functional test for refrigeration of insulated containers using mechanical refrigeration units (MRU) in high temperature environments (see 8.5); y) Increased the energy consumption of mechanical refrigeration unit (MRU) for refrigeration of insulated containers at the set ambient temperature (see 8.6); z) Deleted the performance test of refrigerated containers using liquid refrigerant (see 8.17 of GB/T 7392-1998); aa) The strength test method for the installation device of hanging equipment has been changed (see 8.7, 8.18 of GB/T 7392-1998); bb) Changed the general requirements for electrical equipment for insulated containers (see 9.1, 9.1 of GB/T 7392-1998); cc) Changed the general requirements for standard voltage equipment (see 9.2, 9.2 of GB/T 7392-1998); dd) Delete the illustrations of the strength test of various models and sizes of insulated containers and the specific load transfer area of the bottom structure of the insulated container. Body requirements, dimensional requirements for fork grooves, dimensional requirements for gooseneck grooves, air inlets and outlets, steady state diagrams and methods in heat leakage tests Conversion of statutory and non-statutory units of measurement (see Appendix A, Appendix B, Appendix C, Appendix D, Appendix F, GB/T 7392-1998 Appendix J, Appendix N); ee) The description of the wiring phase sequence diagram symbols on the plugs and sockets of the insulated container has been changed (see Appendix D, GB/T 7392-1998 Appendix K); ff) Added general requirements for 220V and dual-voltage equipment (see Appendix G). This document is equivalent to ISO 1496-2.2018 "Series 1 Technical Requirements and Test Methods for Containers Part 2.Insulation Collection Packing". Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed and coordinated by the National Container Standardization Technical Committee (SAC/TC6). This document was drafted by. Water Transport Research Institute of the Ministry of Transport, Dalian CRRC Tielong Containerization Technology and Equipment R&D Co., Ltd., Shanghai Baoshan Taiping Container Co., Ltd., CIMC Container Holdings Co., Ltd. The main drafters of this document. Wang Jing, Deng Yanjie, Zhang Shuguang, Luo Yanping, Guo Jun, Shi Shuquan, Xu Jinyong, Jin Jing, Li Jichun, Zhao Jieting. The previous versions of the documents replaced by this document are as follows. ---GB/T 7392, first released in 1987 and first revised in.1998.

Introduction

Series 1 containers are international standard containers that are circulated around the world. The standardization and standardization of their design, production, and inspection are crucial. important. In order to standardize and promote the development of Series 1 container transportation, ISO has formulated ISO 1496 "Technical Requirements and Tests for Series 1 Containers". "Test Methods" series of standards, my country has carried out corresponding international standard transformation work to provide technical support for the development of my country's container industry. GB/T 5338 "Technical Requirements and Test Methods for Series 1 Containers" is intended to guide and standardize the design, production and production of Series 1 containers. Production, inspection and transportation, consisting of five parts. ---Part 1.General cargo containers. The purpose is to specify the technical requirements and test methods for Series 1 general cargo containers. ---Part 2.Insulated containers. The purpose is to specify the technical requirements and test methods for Series 1 insulated containers. ---Part 3.Liquid, gas and pressurized dry bulk tank containers. The purpose is to specify Series 1 liquids, gases and pressurized dry powders Technical requirements and test methods for cargo tank containers. ---Part 4.Unpressurized dry bulk containers. The purpose is to specify the technical requirements and tests for Series 1 unpressurized dry bulk containers method. ---Part 5.Platform and rack containers. The purpose is to specify the technical requirements and testing of Series 1 platform and rack-mounted containers. test method. Series 1 container technical requirements and test methods Part 2.Insulated Containers

1 Scope

This document specifies the classification, marking, dimensions and rated mass, design requirements, and test methods of Series 1 insulated containers defined by ISO 668. laws and electrical equipment requirements. This document applies to the design, production, inspection and use of insulated containers for road, railway, waterway transportation and combined use.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. mensionsandratings) Note. GB/T 1413-2023 Series 1 Container Classification, Dimensions and Rated Mass (ISO 668.2020, IDT) mediatefittings-Specifications) Note. GB/T 1835-2006 Series 1 Container corner fittings (ISO 1161.1984, MOD) ISO 1496-1 Technical requirements and test methods for Series 1 containers Part 1.General purpose containers (Series1freightcon- Note. GB/T 5338.1-2023 Series 1 Container Technical Requirements and Test Methods Part 1.General Containers (ISO 1496-1.2013, IDT) Note. GB/T 1836-2017 Container code, identification and marking (ISO 6346.1995, IDT) IEC 60309-2 Industrial plugs, sockets and couplers Part 2.Dimensional compatibility and interoperability of electrical accessories with plugs and sockets Note. GB/T 11918.2-2014 Industrial plugs, sockets and couplers Part 2.Dimensional compatibility and interchangeability of electrical accessories with pins and sockets Sexual requirements (IEC 60309-2.2012, MOD)

3 Terms and definitions

The following terms and definitions as defined in ISO 668, ISO 1161, ISO 1496-1, ISO 6346, IEC 60309-2 apply to this document. document. 3.1 thermal container thermalcontainer insulated container insulatedcontainer Containers equipped with insulated wall panels, doors, bottoms and tops to reduce heat exchange inside and outside the box. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5338.2-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5338.2-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5338.2-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5338.2-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.