GB/T 5169.33-2023 English PDF

US$404.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5169.33-2023: Fire hazard testing for electric and electronic products - Part 33: Guidance for assessing the fire hazard - Ignitability - General guidance
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5169.33-2023	404	Add to Cart	4 days	Fire hazard testing for electric and electronic products - Part 33: Guidance for assessing the fire hazard - Ignitability - General guidance	Valid

Similar standards

GB/T 5169.19   GB/T 5169.16   GB/T 5169.21   GB/T 5169.34   GB/T 5169.31   GB/T 5169.30   

Basic data

Standard ID: GB/T 5169.33-2023 (GB/T5169.33-2023)
Description (Translated English): Fire hazard testing for electric and electronic products - Part 33: Guidance for assessing the fire hazard - Ignitability - General guidance
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K04
Classification of International Standard: 13.220.40; 29.020
Word Count Estimation: 22,221
Date of Issue: 2023-09-07
Date of Implementation: 2024-04-01
Older Standard (superseded by this standard): GB/Z 5169.33-2014
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 5169.33-2023: Fire hazard testing for electric and electronic products - Part 33: Guidance for assessing the fire hazard - Ignitability - General guidance

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13.220.40;29.020 CCSK04 National Standards of People's Republic of China Replace GB /Z 5169.33-2014 Fire hazard test for electrical and electronic products Part 33.Guidelines for fire hazard assessment General principles of ignition (IEC 60695-1-20.2016,Firehazardtesting-Part 1-20.Guidanceforassessing Released on 2023-09-07 Implemented on 2024-04-01 State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

Preface III Introduction IV 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Principle of ignition property 5 5 Considerations in selecting test methods 8 5.1 General 8 5.2 Fire 8 5.3 Ignition source 8 5.4 Types of specimens11 5.5 Test procedures and equipment 11 6 Use and explanation of test results 11 Appendix A (informative) Cases of fires caused by arcs in underground hydropower stations and urban substations 12 Appendix NA (Informative) Published Part 13 of "Fire Hazard Test of Electrical and Electronic Products" Reference 15

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 33 of "Fire Hazard Test of Electrical and Electronic Products". "Fire Hazard Test of Electrical and Electronic Products" has been released See Appendix NA for some. This document replaces GB /Z 5169.33-2014 "Fire Hazard Test of Electrical and Electronic Products - Part 33.Guidelines for Fire Hazard Assessment" "General Principles of Ignitability", compared with GB /Z 5169.33-2014, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The standard attribute is changed from a guidance document to a recommended standard; b) Added three terms and definitions. “spontaneous combustion”, “pyrolysis” and “short circuit” (see 3.1, 3.25 and 3.26); c) The terms and definitions of “fire” and “ignition” have been changed (see 3.5, 3.20, 3.3, 3.17 of the.2014 edition). This document is equivalent to IEC 60695-1-20.2016 "Fire Hazard Test Part 1-20.Guidelines for Fire Hazard Assessment of Electrical Products "General Principles of Ignitability". This document has made the following minimal editorial changes. ---In order to be consistent with the existing series of standards, the name of this document is changed to "Fire Hazard Test of Electrical and Electronic Products - Part 33.Fire Hazard "General Principles of Ignitability in Risk Assessment Guidelines"; --- Move some of the informative citations in the normative citations in Chapter 2 to the references; --- Add an informative appendix NA to list the published parts of the "Fire Hazard Test of Electrical and Electronic Products". Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Standardization Technical Committee for Fire Hazard Testing of Electrical and Electronic Products (SAC/TC300). This document was drafted by. China Electrical Equipment Research Institute Co., Ltd., Guangdong Midea Refrigeration Equipment Co., Ltd., Shenzhen Customs Industry Product Inspection Technology Center, the Fifth Research Institute of Electronics of the Ministry of Industry and Information Technology, Shandong Product Quality Inspection Research Institute, Beijing Teruit Inspection Technology Service Co., Ltd., China Household Electrical Appliances Research Institute, Weikai Testing Technology Co., Ltd., Shenzhen Institute of Metrology and Quality Inspection, Zhejiang Yue Hua Telecom Co., Ltd., State Grid Sichuan Electric Power Company Electric Power Research Institute, Huangpu Customs Technology Center, Tianjin Jinhang Computing Technology Research Institute. The main drafters of this document. Jie Ganxin, Zhang Hanping, Zhang Qingxin, Zhang Yuanqin, Zhao Yi, Liu Xiuzhen, Gao Lingsong, Gui Yi, Peng Qiang, Liu Yan, Zhuang Hui, Wang Sheng, Zhang Chenmeng, Zheng Shaofeng, Zhang Tuqiang. The previous versions of this document and the documents it replaces are as follows. ---First released in.2014 as GB /Z 5169.33-2014; ---This is the first revision.

Introduction

The design of all electrical and electronic products needs to take into account fire risks and potential fire hazards. Design of components, circuits and components and materials are screened to reduce the potential risk of fire to a tolerable level even in the event of foreseeable misuse, malfunction and failure. within the range. The purpose of the "Fire Hazard Test for Electrical and Electronic Products" is to save lives by reducing the number of fires or reducing the severity of fires. lives and protect property. It can be passed. ---Prevent ignition caused by live parts as much as possible. If ignition occurs, limit the ignition range to the housing of electrical and electronic products; --- Minimize the spread of flames outside the product shell and the harmful effects of combustion products including heat, smoke, toxic or corrosive gases Harmful effects are minimized. "Fire Hazard Test of Electrical and Electronic Products" now consists of 38 parts, divided into three major sub-fields. ---Fire hazard test assessment guidelines and terminology standards, including 1 terminology and 8 assessment guidelines, are intended to provide guidance in this professional field Provides guidance and reference procedures for fire hazard assessment; ---Small-scale fire test standards, including 4 basic glow wire/hot wire test methods, 9 flame test methods, 2 abnormal resistance The purpose of the thermal capacity test method is to introduce specific heat source models suitable for use by electrical and electronic equipment manufacturers and testing institutions. Methods for small-scale testing of heat sources intended to cause fires; ---Hazard assessment standards for combustion streams, including 2 corrosiveness, 2 smoke, 5 toxicity, 3 heat release, and 2 flame surface Spread, the purpose is to provide measurement of combustion flow toxicity, corrosiveness, smoke blur and heat release of electrical and electronic products and their materials. guidelines and the technical status of current test methods. This document gives an overview of the ignitability of electrical and electronic products and their relevance to fire hazards. Fires can cause harm to life and property by producing heat (thermal hazards) and toxic combustion streams, corrosive combustion streams, and smoke (non-thermal hazards). create a threat. Fires begin with ignition and in some cases may progress to flashover and complete ignition. Therefore, ignition resistance plays an important role in the evaluation of fire hazard. Defining aspects are considered one of the most important properties of materials. If there is no ignition, there is no fire. For most materials (except metals and some other elements), ignition occurs in the gaseous state. Combustible when mixed with air Ignition begins when the vapor temperature is so high that the exothermic oxidation reaction spreads rapidly. The ease of ignition depends on the chemical properties of the vapor, the ignition Material/air ratio and temperature are closely related. For liquids, flammable vapors result from the evaporation of the liquid, and the evaporation process depends on the temperature and chemical composition of the liquid. For solids, flammable vapors result from pyrolysis when the temperature of the solid is high enough. The evaporation process depends on the temperature and chemical composition of the solid, also Depends on the thickness, density, specific heat capacity and thermal conductivity of the solid. The ease with which a specimen ignites depends on many variables. Factors to consider when assessing ignition properties include. a) The geometry of the specimen, including thickness, and the presence of edges, corners or joints; b) any anisotropy; c) surface orientation; d) Air flow speed and direction; e) The nature and location of the ignition source; f) The magnitude and location of external heat flux; g) Whether the combustible material is a liquid or a solid. This revision is conducive to keeping the technology in this field consistent with international standards, thereby improving the quality of my country's electrical and electronic products and promoting Trade, exchange and technical cooperation. Fire hazard test for electrical and electronic products Part 33.Guidelines for fire hazard assessment General principles of ignition

1 Scope

This document provides guidelines for assessing the ignitability of electrical and electronic products and their materials. Includes the following aspects. a) Principle of ignitability; b) Selection of appropriate test methods; c) Use and explanation of test results. This document is applicable to the assessment of the ignitability of electrical and electronic products and the materials used in them and their correlation with fire hazards. This document is intended to be used by technical committees when preparing standards based on the principles set out in IEC Guide104 and ISO /IEC Guide51 use. One of the tasks of the technical committee is to use this series of standards wherever applicable when writing standards in this field. unless relevant Standards are specifically mentioned or listed, otherwise the requirements, test methods or test conditions of this document will not apply.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 5169.1-2015 Fire hazard test for electrical and electronic products Part 1.Fire test terminology (IEC 60695-4.2012, IDT) ISO 13943.2017 Firesafety-Vocabulary

3 Terms and definitions

The following terms and definitions as defined in ISO 13943.2017 and GB/T 5169.1-2015 apply to this document. 3.1 Auto-ignition spontaneous combustion spontaneousignition self-ignitionCA,US spontaneous combustionunpilotedignitionCA,US Ignition (3.20) due to increase in temperature in the absence of a separate source of ignition (3.22). Note 1.Ignition may be caused by self-heating or by an external heat source. Note 2.In North America, "spontaneousignition" is the preferred term for ignition caused by self-heating. [Source. ISO 13943.2017,3.24] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5169.33-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5169.33-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5169.33-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5169.33-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.