GB/T 5019.4-2025 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5019.4-2025: Insulating materials based on mica - Part 4: Mica paper Status: Valid GB/T 5019.4: Historical versions
Basic dataStandard ID: GB/T 5019.4-2025 (GB/T5019.4-2025)Description (Translated English): Insulating materials based on mica - Part 4: Mica paper Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K15 Classification of International Standard: 29.035.50 Word Count Estimation: 18,123 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 5019.4-2009 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 5019.4-2025: Insulating materials based on mica - Part 4: Mica paper---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5019.4-2025ICS 29.035.50 CCSK15 National Standard of the People's Republic of China Replaces GB/T 5019.4-2009 Mica-based insulation materials Part 4.Mica paper Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 4 of GB/T 5019 Mica-based insulating materials. GB/T 5019 has been published in the following parts. --- Part 1.Definitions and general requirements; --- Part 2.Test methods; --- Part 3.Commutator spacers and materials; --- Part 4.Mica paper; --- Part 5.Rigid mica sheets for electric heating equipment; --- Part 6.Polyester film reinforced B-stage epoxy resin bonded mica tape; --- Part 7.Glass cloth and film reinforced epoxy resin bonded mica tape for vacuum pressure impregnation (VPI); --- Part 8.Glass cloth reinforced B-stage epoxy resin bonded mica tape; --- Part 9.Epoxy resin bonded polyester film mica tape for wrapping single conductors; --- Part 10.Mica tapes for fire-resistant safety cables; --- Part 11.Shaped mica sheets; --- Part 12.Highly breathable glass cloth reinforced epoxy low-resistance mica tape; --- Part 13.High thermal conductivity glass cloth reinforced with low-resistance mica tape. This document replaces GB/T 5019.4-2009 "Mica-based insulating materials Part 4.Mica paper" and GB/T 5019.4- Compared with.2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows. --- The classification is refined and product models are added, from 5 models to 10 models (see Chapter 4); --- Changed the requirements for the joints of each roll of mica paper (see 5.1.1, 6.1.1 of the.2009 edition); --- Changed the description of thickness specifications (see 5.1.2, 6.1.2 of the.2009 edition); --- Added performance requirements for MPM2-L2, MPM3-b, MPM3-L2, MPM3-L3 and MPP4-L2; and The requirements of other original models have been modified according to actual needs (see 5.2, 6.1.3 of the.2009 edition). This document is modified to adopt IEC 60371-3-2.2005 "Mica-based insulating materials Part 3.Specifications for individual materials Part 2. Mica Paper. This document has made the following structural adjustments compared to IEC 60371-3-2.2005. --- Added Chapter 3 "Terms and Definitions" and the numbers of other chapters and articles shall be postponed accordingly; --- Deleted the title of Chapter 3 "Overview" of IEC 60371-3-2.2005.Chapter 4 corresponds to 3.1 of IEC 60371-3-2.2005. The title of Chapter 4 was changed to “Classification”; --- Added Chapter 5 "Requirements" chapter title, 5.1 corresponds to Chapter 4 of IEC 60371-3-2.2005, 5.1.1 corresponds to IEC 60371-3-2. 2005 4.1, added 5.1.2, 5.2 corresponds to 4.2 of IEC 60371-3-2.2005; --- Tables 1 to 6 correspond to Table 2 of IEC 60371-3-2.2005; --- Chapter 6 corresponds to Chapter 5 of IEC 60371-3-2.2005, 6.1 corresponds to 5.1 of IEC 60371-3-2.2005, and 6.2 corresponds to IEC 60371-3-2.2005 5.1.1, 6.3 correspond to IEC 60371-3-2.2005 5.1.2; 6.4 "Quantity" and 6.5 "Thickness" are added. 6.6 “Air permeability”, 6.7 “Permeation time”, 6.8 “Conductivity of water extractables”, 6.9 “Mass loss”, 6.10 “Tensile strength” and 6.11 “Electrical strength”; --- Chapter 7 corresponds to 3.2 of IEC 60371-3-2.2005, and Chapter 8 corresponds to 3.3 of IEC 60371-3-2.2005; --- Deleted Figures 1 to 3 of IEC 60371-3-2.2005; --- Added Appendix A. The technical differences between this document and IEC 60371-3-2.2005 and their reasons are as follows. --- The content of "Scope" has been reorganized (see Chapter 1) to meet the needs of technical content; --- Deleted the normative reference IEC 60371-1.2003, and re-edited the "General requirements" for mica paper to meet the requirements of Technical content needs (see 5.1); ---Added MPM2-L2, MPM3-b, MPM3-L2, MPM3-L3, MPP4-L2, MPS5 product types The number and model description (see Chapter 4) has been deleted from the naming content in IEC 60371-3-2.2005 to conform to my country's actual situation. need; --- According to the actual needs of my country, the requirements for the joints of each roll of mica paper have been changed, and the joints of each roll have been subdivided according to the quantitative and roll length of mica paper. Requirements (see 5.1.1); --- Added thickness specifications to adapt to my country's technical conditions and improve operability (see 5.1.2); --- Added performance requirements for MPM2-L2, MPM3-b, MPM3-L2, MPM3-L3, MPP4-L2, and MPS5 The requirements of other original models were changed according to actual needs, and the requirements for mica paper thickness in IEC 60371-3-2.2005 were deleted. The requirements of degree are met to adapt to my country's technical conditions and improve operability (see Table 1 to Table 6); --- Added "quantitative" and replaced ISO 536.1995 (see 6.4) with the normative reference GB/T 451.2 to adapt to my country's technical requirements. Technical conditions, increase operability; --- Added "thickness" and replaced ISO 534.2005 (see 6.5) with the normative reference GB/T 451.3 to adapt to my country's technical requirements. Technical conditions, increase operability; --- Added "air permeability" (see 6.6) to adapt to my country's technical conditions and increase operability; --- Added "penetration time" (see 6.7) to adapt to my country's technical conditions and increase operability; --- Added "Conductivity of water extract" and replaced IEC 60589.1977 (see 6.8) with the normative reference GB/T 7196 to apply In response to my country's technical conditions, increase operability; --- Added "mass loss" (see 6.9) to increase operability; --- Added "tensile strength" (see 6.10) to adapt to my country's technical conditions and increase operability; --- Added "electrical strength" performance requirements and test methods (see Tables 1 to 6, 6.11) to meet the actual needs of my country; --- Deleted Figures 1 to 3 of IEC 60371-3-2.2005.The contents in the figures are not critical information in actual applications in my country. And it does not affect the core technical content of the standard. The following editorial changes have been made to this document. --- To coordinate with the existing standard, the name of the standard is changed to "Mica-based insulating materials Part 4.Mica paper"; --- Deleted the notes on MPM1 and MPM2 in IEC 60371-3-2.2005; --- Added Appendix A (informative). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Technical Committee for Standardization of Insulation Materials (SAC/TC51). This document was drafted by. Tongcheng Yunshui Mica Technology Co., Ltd., Zhejiang Rongtai Electrical Equipment Co., Ltd., Beijing Yitian Lingyun Mica Co., Ltd., Hubei Ping'an Electrical Materials Co., Ltd., Sichuan Dongcai New Materials Co., Ltd., Goode Electrical Materials Systems (Suzhou) Co., Ltd., Guilin Electric Science Research Institute Co., Ltd., Suzhou Jufeng Electrical Insulation Systems Co., Ltd., Harbin University of Science and Technology, Hubei Zhongtian Mica Products Co., Ltd., Hubei Ping'an Electric Technology Co., Ltd., Pingjiang County Weipai Mica Insulation Materials Co., Ltd., Sichuan Science City Jiuxin Technology Co., Ltd., Hunan Ruida Mica New Materials Co., Ltd., Pingjiang County Shengying Mica Industrial Co., Ltd., Jiangsu Yuming New Materials Co., Ltd., China Southern Power Grid Co., Ltd. Ultra-High Voltage Transmission Company, Guilin Saimeng Testing Technology Co., Ltd., Weikai Detection Technology Co., Ltd., CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd., Beijing Goldwind Science and Technology Wind Power Equipment Co., Ltd., CRRC Zhuzhou Electric Machinery Co., Ltd., CRRC Yongji Electric Co., Ltd., Dongfang Electric Corporation Dongfang Electric Co., Ltd., Harbin Electric Power Equipment Co., Ltd., Shanghai Electric Group Shanghai Electric Machinery Factory Co., Ltd., China Southern Power Grid Co., Ltd. Ultra-high Voltage Transmission Company Nanning Bureau, Shenzhen Power Supply Bureau Co., Ltd., Mingzhu Electric Co., Ltd. The main drafters of this document are. Kong Wei, Li Xinhui, Zhang Changhai, Zheng Minmin, Li Jun, Wei Chen, Huang Jing, Xu Na, Wu Haifeng, Zhao Jie, Wang Xianfeng, Liang Qianqian, Xia Yu, Zhu Miao, Song Yuxia, Chi Qingguo, Ge Heyi, Li Shulin, Hu Liang, Li Qiangjun, Zhang Yun, Wang Weiwei, Hu Xuelian, Chen Hongsheng, Liu Guanfang, Zhu Yongming, Dong Dinglu, He Mingpeng, Huang Xiaozili, Deng Zhiyong, Zhou Cheng, Tian Jianyong, Ou Mingjie, Ouyang Limin, Ouyang Yun, Wu Shaowu, Wang Sanfu, Cheng Yanyuan, Feng Qu, Zeng Yu, Tang Jinquan, Tang Feng, and Luo Chuanyong. The previous versions of this document and the documents it replaces are as follows. --- This document was first published in 1988 as GB/T 10216-1988; ---First revised in.1998; ---Second revision in.2009, the standard number was changed to GB/T 5019.4-2009; ---This is the third revision.introductionThe standard for mica insulation materials for electrical use is widely used in the research and development, production, quality inspection, sales, acceptance and technical exchanges of this series of products. Mica insulation materials for electrical use involve a wide variety of products, and the corresponding IEC 60371 (mica-based insulation materials) series standards are It is divided into different parts (or chapters) to maintain the same writing method as the corresponding IEC standard, and to add different types of mica materials The technical performance requirements of the products are also different, so different parts need to be compiled separately when compiling this product standard. GB/T 5019 "Mica-based insulating materials" specifies the definition and general requirements, test methods, various The single material product standard is planned to consist of the following parts. --- Part 1.Definitions and general requirements. The purpose is to determine the terms and definitions, general requirements of mica insulating materials for electrical use. --- Part 2.Test methods. The purpose is to determine the test methods for mica insulating materials for electrical use. --- Part 3.Commutator separators and materials. The purpose is to determine the general requirements, dimensions, defects and conductivity of commutator separators and materials Particles, performance requirements, shape and marking. --- Part 4.Mica paper. The purpose is to determine the classification, supply, marking, requirements and test methods of mica paper. --- Part 5.Rigid mica sheets for electric heating equipment. The purpose is to determine the classification, general requirements, defects and Traps and conductive particles, thickness and tolerances, performance requirements, test methods, supply forms and marking. --- Part 6.Polyester film reinforced B-stage epoxy resin bonded mica tape. The purpose is to determine the polyester film reinforced B-stage epoxy resin Naming and packaging of adhesive mica tape. --- Part 7.Glass cloth and film reinforced epoxy resin bonded mica tape for vacuum pressure impregnation (VPI). The purpose is to determine the vacuum Classification, requirements, test methods, inspection rules, and other requirements for glass cloth and film-reinforced epoxy resin bonded mica tapes for pressure impregnation (VPI) Packaging, labeling, transportation and storage. --- Part 8.Glass cloth reinforced B-stage epoxy resin bonded mica tape. The purpose is to determine the glass cloth reinforced B-stage epoxy resin bonded mica tape. Product classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage of mica tapes. --- Part 9.Epoxy resin bonded polyester film mica tape for wrapping single conductors. The purpose is to determine the epoxy resin bonded polyester film mica tape for wrapping single conductors. Classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage of resin-bonded polyester film mica tape. --- Part 10.Mica tape for fire-resistant safety cables. The purpose is to determine the product model, requirements, test conditions, and other requirements of mica tape for fire-resistant safety cables. Test methods, inspection rules, packaging, marking, transportation and storage. --- Part 11.Shaped mica sheets. The purpose is to determine the product classification, requirements, test methods, inspection rules, packaging Packaging, marking, transportation and storage. --- Part 12.Highly permeable glass cloth reinforced epoxy low-resistance mica tape. The purpose is to determine the high permeability glass used for vacuum pressure impregnation Classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of cloth reinforced epoxy low-resistance mica tape. --- Part 13.High thermal conductivity glass cloth reinforced with low-resistance mica tape. The purpose is to determine the high thermal conductivity glass cloth reinforced with vacuum pressure impregnation Classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage of strong and low-resistance mica tapes. Mica-based insulation materials Part 4.Mica paper1 ScopeThis document specifies the classification, requirements, supply, marking and test methods of mica paper for electrical insulation. This document applies to the manufacture of mica paper for electrical insulation.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 451.2 Paper and board — Part 2.Determination of weight (GB/T 451.2-2023, ISO 536.2019, MOD) GB/T 451.3 Paper and board — Determination of thickness (GB/T 451.3-2002, idt ISO 534.1988) GB/T 5019.2-2009 Mica-based insulating materials Part 2.Test methods (IEC 60371-2.2004, MOD) Note. There is no technical difference between the referenced content of GB/T 5019.2-2009 and the referenced content of IEC 60371-2.2004. GB/T 7196 Test method for determination of ionic impurities in electrical insulating materials by liquid extraction (GB/T 7196-2012, IEC 60589. 1977, IDT) GB/T 20628.2-2006 Cellulose paper for electrical purposes Part 2.Test methods (IEC 60554-2.2001, MOD) Note. There is no technical difference between the referenced content of GB/T 20628.2-2006 and the referenced content of IEC 60554-2.2001. ISO 5636-5 Paper and board, determination of air permeability (medium range) — Part 5.Gurley method3 Terms and DefinitionsThere are no terms or definitions that require definition in this document.4 CategoriesMica paper can be divided into several types according to the properties of the mica minerals used and the manufacturing process. There are differences in physical and chemical properties. Mica paper is marked with the symbols MPM, MPP or MPS, depending on the properties of the mica mineral used. MPM---Mica paper made of muscovite as raw material; MPP---Mica paper made of phlogopite as raw material; MPS---Mica paper made from artificial synthetic mica as raw material. Commonly used mica paper types are as follows. MPM1 type. mica paper made from calcined muscovite and chemical pulping; MPM2-L1 type. mica paper made from calcined muscovite and mechanically pulped; MPM2-L2 type. mica paper made from calcined muscovite and aramid fiber, mechanically pulped; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5019.4-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 5019.4-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5019.4-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5019.4-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5019.4-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5019.4-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
