GB/T 5019.10-2022 English PDFUS$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5019.10-2022: Specification for insulating materials based on mica - Part 10: Mica paper tapes for flame-resistant security cables Status: Valid GB/T 5019.10: Historical versions
Basic dataStandard ID: GB/T 5019.10-2022 (GB/T5019.10-2022)Description (Translated English): Specification for insulating materials based on mica - Part 10: Mica paper tapes for flame-resistant security cables Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K15 Word Count Estimation: 14,143 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5019.10-2022: Specification for insulating materials based on mica - Part 10: Mica paper tapes for flame-resistant security cables---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Specification for insulating materials based on mica - Part 10.Mica paper tapes for flame-resistant security cables ICS 29.035.50 CCSK15 National Standards of People's Republic of China Replacing GB/T 5019.10-2009 Mica-based insulating material Part 10.Mica tapes for fire-resistant safety cables Published on 2022-07-11 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 10 of GB/T 5019 "Mica-based insulating materials". GB/T 5019 has released the following parts. --- Part 1.Definitions and general requirements; --- Part 2.Test methods; --- Part 3.Commutator diaphragms and materials; --- Part 4.Mica paper; --- Part 5.Mica boards for electric heating equipment; --- Part 6.Polyester film reinforced B-stage epoxy resin-bonded mica tape; --- Part 7.Glass cloth and film reinforced epoxy-bonded mica tape for vacuum pressure impregnation (VPI); --- Part 8.Glass cloth reinforced B-stage epoxy-bonded mica tape; --- Part 9.Epoxy-bonded polyester film mica tape for wrapping a single conductor; --- Part 10.Mica tapes for fire-resistant safety cables; --- Part 11.Molded mica plates; --- Part 12.High permeability glass cloth reinforced epoxy less glue mica tape. This document replaces GB/T 5019.10-2009 "Mica-based insulating materials - Part 10.Mica for fire-resistant safety cables Compared with GB/T 5019.10-2009, in addition to structural adjustment and editorial changes, the main technical changes are as follows. --- Changed the product model naming method (see Table 1, Chapter 3 of the.2009 edition); --- Added 0.20mm product thickness specification and corresponding performance requirements (see Table 2, 4.2.2 of the.2009 edition); --- Deleted the "edge curvature" property (see 4.2.2 of the.2009 edition); ---Adjust the required value of the power frequency dielectric strength of the product from ≥30MV/m to ≥10MV/m (see Table 5,.2009 edition 4.2.4). This document is modified by IEC 60371-3-8.1995 Amd1.2007 "Mica-based insulating materials Part 3.Individual materials Part 8 of the Specification. Mica Tapes for Fire-Resistant Safety Cables. Compared with IEC 60371-3-8.1995, this document has made the following structural adjustments. --- Integrate 6.7, 6.8, 6.9 of IEC 60371-3-8.1995 into Table 5. The technical differences between this document and IEC 60371-3-8.1995 and their reasons are as follows. ---Replace IEC 60371-2.2004 (see Chapter 2) with the normative reference GB/T 5019.2-2009, between the two documents The degree of consistency is modified to adapt to our country's technical conditions and improve operability; --- Replaced IEC 60371-3-2.2005 (see Chapter 2) with the normative reference GB/T 5019.4, the consistency between the two documents The degree of flexibility is modified to adapt to the technical conditions of our country and improve the operability; --- Changed the product model naming method in IEC 60371-3-8.1995 to meet the actual needs of our country (see Chapter 4); --- Change the glass cloth sizing agent content from not more than 3% (by mass) to 2% to meet the application requirements of our country (see 5.2); --- Changed the requirements for the film and added the normative reference GB/T 13542.6 (see 5.3) to adapt to our country's technical regulations parts to improve operability; --- Added the product thickness specification of 0.20mm refractory mica tape and the corresponding performance requirements to meet the application requirements of our country (see Section 6 Chapter 2); ---Change the maximum width of refractory mica tape full width material and sheet material after trimming from 1000mm to 860mm, to Meet the application requirements of our country (see 6.2.2); --- Considering the actual situation in my country, the length is expressed by the diameter of the reel (see 6.2.3); --- Increase the dimensional specifications and dimensional tolerances of the die to meet the application requirements of our country (see 6.2.4); --- Taking into account the actual needs of our country, the naming and performance requirements of artificial synthetic mica have been added (see Chapter 4, 6.3, 6.4); --- Considering the actual needs of our country, the performance requirements for "power frequency electrical strength", "volume resistivity" and "insulation resistance" have been added (see 6.4); --- Taking into account the actual needs of our country, the chapters "Test Methods" and "Inspection Rules" have been added, and the normative references have been added. GB/T 31838.4, GB/T 19216.11 and GB/T 19216.21 (see Chapter 7 and Chapter 8). The following editorial changes have been made to this document. --- In order to harmonize with existing standards, the standard name is changed to "Mica-based insulating materials - Part 10.Cloud for fire-resistant safety cables master tape"; --- For the convenience of use, the composition format of different types of mica tapes in IEC 60371-3-8.1995 has been integrated and edited. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Technical Committee for Standardization of Insulating Materials (SAC/TC51). This document is drafted by. Zhejiang Rongtai Electrical Equipment Co., Ltd., Hubei Ping An Electrical Technology Co., Ltd., Beijing Yitian Lingyun Branch Technology Co., Ltd., Hubei Ping An Electrical Industry Co., Ltd., Yangzhou Xinqite Cable Material Co., Ltd., Guilin Saimeng Testing Technology Co., Ltd. Company, Harbin University of Science and Technology, Guilin Electrical Apparatus Research Institute Co., Ltd., Guangdong Yisheng Testing Co., Ltd., Zhejiang Huiri Environmental Testing Co., Ltd. Company, Xi'an Kaijinzhe Testing Co., Ltd., Guangdong Yidu Technology Co., Ltd., Guangdong Chengxin Technology Co., Ltd., Zhejiang Anya Intelligent Technology Co., Ltd. Co., Ltd., Zaozhuang Huitian Meiya Thermal Insulation and Energy Saving Building Materials Co., Ltd., Shaanxi Runzheng Testing Technology Co., Ltd., Yiwu Jinglong Mould Co., Ltd. Company, Xi'an Jingzhongsheng Technology Co., Ltd. The main drafters of this document. Zheng Minmin, Pan Dujiang, Chi Qingguo, Li Xinhui, Zhao Jie, Li Jun, Wang Xianfeng, Li Wei, Wu Haifeng, Tang Chongshu, Li Jingbo, Yu Wenwu, Zhang Tiandong, Luo Chuanyong, Xiang Xiaoyun, Wang Cuilin, Wu Caichun, Li Shouying, Huang Jianwei, Nan Shaowei, Song Guangsheng, Deng Daicong, Gong Lihua and Xiang Huaming. The previous versions of this document and its superseded documents are as follows. ---First published in.2009 as GB/T 5019.10-2009. ---This is the first revision.IntroductionThe electrical mica insulating material standard is widely used in the research and development, production, quality inspection, sales, acceptance and technical exchange of this series of products. Electrical mica insulating materials involve many types of products, and the corresponding IEC 60371 "mica-based insulating materials" series of standards are Divided into different parts (or chapters), in order to maintain the basic consistency with the corresponding IEC standard writing method, in addition to different kinds of mica materials. The technical performance requirements of the products are also different. When compiling this product standard, it is necessary to list different parts separately. GB/T 5019 specifies the definition and general requirements, test methods, and product standards of individual materials for electrical mica insulating materials. It consists of the following parts. --- Part 1.Definitions and general requirements. The purpose is to determine the terms and definitions, general requirements for electrical mica insulating materials. --- Part 2.Test methods. The purpose is to determine a test method for mica insulating materials for electrical purposes. --- Part 3.Commutator diaphragms and materials. The purpose is to determine the general requirements, dimensions, defects and conductivity of commutator diaphragms and materials Particles, performance requirements, shapes and signs. --- Part 4.Mica paper. The purpose is to determine the classification, supply, marking, requirements and test methods of mica paper. --- Part 5.Mica boards for electric heating equipment. The purpose is to determine the classification, general requirements, defects and electrical conductivity of mica boards for electric heating equipment Particles, thicknesses and tolerances, performance requirements, test methods, forms of supply and markings. --- Part 6.Polyester film reinforced B-stage epoxy-bonded mica tape. The purpose is to identify polyester film reinforced B-stage epoxy resins The naming and packaging of adhesive mica tapes. --- Part 7.Vacuum pressure impregnation (VPI) epoxy-bonded mica tapes reinforced with glass cloth and film. The purpose is to determine the vacuum Classification, requirements, test methods, inspection rules, glass cloth and film reinforced epoxy resin bonded mica tapes for pressure impregnation (VPI), Packaging, marking, transportation and storage. --- Part 8.Glass cloth reinforced B-stage epoxy-bonded mica tape. The purpose is to determine glass cloth reinforced B-stage epoxy bonding Product classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage of mica tapes. --- Part 9.Single wire wrapping with epoxy resin bonded polyester film mica tape. The purpose is to determine the epoxy used for wrapping a single wire Classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage of resin-bonded polyester film mica tapes. --- Part 10.Mica tape for fire-resistant safety cables. The purpose is to determine the product model, requirements and test of mica tapes for fire-resistant safety cables. inspection methods, inspection rules, packaging, marking, transportation and storage. --- Part 11.Plastic mica plates. The purpose is to determine the product classification, requirements, test methods, inspection rules, package packaging, marking, transport and storage. --- Part 12.High permeability glass cloth reinforced epoxy less glue mica tape. The purpose is to identify high permeability glass for vacuum pressure impregnation Classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of cloth-reinforced epoxy resin-less mica tapes. --- Part 13.High thermal conductivity glass cloth with less glue mica tape. The purpose is to determine the product classification, requirements and test methods of plastic mica boards. laws, inspection rules, packaging, marking, transportation and storage. Mica-based insulating material Part 10.Mica tapes for fire-resistant safety cables1 ScopeThis document specifies the use of fire-resistant safety cables reinforced with alkali-free glass fiber cloth/plastic film and mica paper bonded with suitable resins. Types, requirements, test methods, inspection rules, marking, packaging, transportation and storage of mica tapes (hereinafter referred to as "refractory mica tapes"). This document applies to refractory mica tapes for cables that can continue to operate after a fire, with a nominal thickness from 0.10mm to 0.20mm, and Available in strips, sheets or rolls in a soft state.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 5019.2-2009 Mica-based insulating materials - Part 2.Test methods (IEC 60371-2.2004, MOD) GB/T 5019.4 Mica-based insulating materials Part 4.Mica paper (GB/T 13542.4-2009, IEC 60371-3-2. 2005, MOD) GB/T 13542.6 Films for Electrical Insulation Part 6.Polyimide Films for Electrical Insulation (GB/T 13542.6-2006, IEC 60674-3-4/6.1993, MOD) GB/T 19216.11 Line Integrity Test of Cable or Optical Cable under Flame Conditions Part 11.Test Device Flame Temperature Separate fire not lower than 750℃ (GB/T 19216.11-2003, IEC 60331-11.1999, IDT) GB/T 19216.21 Line Integrity Test of Cable or Optical Cable under Flame Conditions - Part 21.Test Procedures and Requirements Cables with constant voltage of 0.6/1.0kV and below (GB/T 19216.21-2003, IEC 60331-21.1999, IDT) GB/T 31838.4 Dielectric and resistance characteristics of solid insulating materials - Part 4.Resistance characteristics (DC method) Insulation resistance (GB/T 31838.4-2019,IEC 62631-3-3.2015,IDT)3 Terms and DefinitionsThere are no terms and definitions that need to be defined in this document.4 product modelsThe product models divided according to the type of powder mica paper used in the product and the different reinforcing materials and forms are shown in Table 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5019.10-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 5019.10-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5019.10-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5019.10-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5019.10-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5019.10-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
