GB/T 5008.1-2023 PDF EnglishUS$440.00 · In stock · Download in 9 seconds
GB/T 5008.1-2023: Lead-acid starter batteries - Part 1: Technical conditions and methods of test Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 5008.1: Historical versions
Similar standardsGB/T 5008.1-2023: Lead-acid starter batteries - Part 1: Technical conditions and methods of test---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5008.1-2023GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 29.220.20 CCS K 84 Replacing GB/T 5008.1-2013 Lead-Acid Starter Batteries – Part 1.Technical Conditions and Methods of Test (IEC 60095-1.2018, Lead-Acid Starter Batteries – Part 1.General Requirements and Methods of Test, MOD) Issued on. NOVEMBER 27, 2023 Implemented on. JUNE 1, 2024 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 Introduction... 6 1 Scope... 7 2 Normative References... 7 3 Terms, Definitions, Symbols and Classification... 7 4 Technical Requirements... 9 5 Test Methods... 12 6 Inspection Rules... 25 7 Marking, Packaging, Transportation and Storage... 29 Appendix A (Informative) Comparison of Structural Numbers between this Document and IEC 60095-1.2018... 31 Appendix B (Informative) Technical Differences and Causes between this Document and IEC 60095-1.2018... 33 Appendix C (Normative) Sign of Lead-Acid Battery... 36ForewordThis Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents. This Document is Part 1 of GB/T 5008 Lead-Acid Starter Batteries. GB/T 5008 has published the following parts. --- Part 1.Technical Conditions and Methods of Test; --- Part 2.Dimensions of Batteries and Dimensions and Marking of Terminals; --- Part 3.Kinds of Products and Specifications and Dimensions and Marking of Terminals for Heavy Vehicles. This Document replaced GB/T 5008.1-2013 Lead-Acid Starter Batteries – Part 1.Technical Conditions and Methods of Test. Compared with GB/T 5008.1-2013, this Document has made the technical changes as follows besides the structural adjustments and editorial modifications. --- Add Class D and content in "battery classification by performance" (see 3.3.1 of this Edition); --- Change the technical requirements for "charging acceptance capability" (see 4.5 of this Edition; 4.5 of the 2013 Edition); --- Change the technical requirements for "cycle endurance capacity" (see 4.8.3 of this Edition; 4.8 of the 2013 Edition); --- Add technical requirements for "deep discharge recovery capability" (see 4.14 of this Edition); --- Add technical requirements for "parking condition cycle capability" (see 4.15 of this Edition); --- Change the requirements for the exit-factor time of "test samples" (see 5.2.1.1 of this Edition; 5.2.1.1of the 2013 Edition); --- Change the "test process" of the high temperature corrosion test (see 5.9.1.2 of this Edition; 5.9.1.2 of the 2013 Edition); --- Change the "test process" of the cyclic endurance test I (see 5.9.2.2 of this Edition; 5.9.2.2 of the 2013 Edition); ---Change the "cyclic endurance test II " (see 5.9.3 of this Edition; 5.9.3 of the 2013 Edition); --- Add the test method of "vibration resistance of Class-D batteries" (see 5.11 of this Edition); --- Add the test method of "deep discharge recovery capability" (see 5.15 of this Edition); --- Add the test method of "parking condition cycle capability" (see 5.16 of this Edition); --- Change the test items and sample quantity of "battery type inspection" (see 6.1.2 of this Edition; 6.1.2 of the 2013 Edition); --- Change the "battery casing material mark" (see C.1 of this Edition; A.1 of the 2013 Edition); --- Change the “warning sign” (see C.2 of this Edition; A.2 of the 2013 Edition) This Document modified and adopted IEC 60095-1.2018 Lead-Acid Starter Batteries – Part 1. General Requirements and Methods of Test. Compared with IEC 60095-1.2018, this Document has many adjustments in structure. See Appendix A for a comparison list of structural number changes between the two documents. Compared with IEC 60095-1.2018, this Document has many technical differences, and the involved clauses are marked with a vertical single line (|) in the outer margin of the page. A list of these technical differences and their causes is provided in Appendix B. This Document made the following editorial changes. --- In order to coordinate with the existing standards, change the name of the standard into Lead-Acid Starter Batteries – Part 1.General Requirements and Methods of Test. Please note some contents of this Document may involve patents. The issuing agency of this Document shall not assume the responsibility to identify these patents. This Document was proposed by China Electrical Equipment Industry Association. This Document shall be under the jurisdiction of National Technical Committee on Lead-Acid Battery of Standardization Administration of China (SAC/TC 69). Drafting organizations of this Document. Camel Group Battery Research Institute Co., Ltd.; Shenzhen Leoch Power Development Co., Ltd.; Tianneng Battery Group Co., Ltd.; Zhejiang Guyue Battery Co., Ltd.; Fengfan (Yangzhou) Co., Ltd.; Henan Chilwee Genshore Power Co., Ltd.; Ningbo Donghai Storage Battery Co., Ltd.; Jiangxi Herou Power Technology Co., Ltd.; Zhejiang Narada Power Source Co., Ltd.; Wolong Electric Group Zhejiang Dengta Power Source Co., Ltd.; Jujiang Power Technology Co., Ltd.; Guangdong Aokly Group Co., Ltd.; Zhushan County Qinba Barium Salt Co., Ltd.; Chilwee Group Co., Ltd.; Shandong TengXiang Product Quality Testing Co., Ltd.; Shenzhen Renergy Electric Equipment Co., Ltd.; Shenyang Battery Research Institute Co., Ltd.; and Guangxi Xinfeng New Energy Group Co., Ltd. Chief drafting staffs of this Document. Gao Guoxing, Dong Jie, Zhang Hao, Cao Miaogen, Li Gang, Liang Tianbao, Zhang Shuxiang, Qian Lijin, Xiong Jianwen, Zhang Hengshan, Zhu Weiming, Zhang Wei, Shao Shuangxi, Peng Bin, Li Juan, Xu Yanxia, Li Zhuke, Luan Yundong, Fu Bingbing, Shi Junlei, Li Guifa, and Fu Fayou. The historical editions replaced by this Standard are as follows. --- GB/T 5008.1-1985 was first-time published in 1985; first-time revised in 1991; second-time revised in 2005; third-time revised in 2013; --- It is fourth-time revised hereby.1 ScopeThis Document specifies the classification, technical requirements, inspection rules and marking, packaging, transportation and storage requirements of lead-acid starter batteries (hereinafter referred to as batteries), and describes the corresponding test methods.2 Normative ReferencesThe provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 2900.41 Electrotechnical terminology - Primary and secondary cells and batteries (GB/T 2900.41-2008, IEC 60050-482.2003, IDT) GB/T 5008.2 Lead-acid starter batteries - Part 2.Dimensions of batteries and dimensions and marking of terminals (GB/T 5008.2-2023, IEC 60095-2.2021, MOD)3 Terms, Definitions, Symbols and ClassificationA low-water loss battery that does not require maintenance during its service life, provided that specified conditions are met.4 Technical RequirementsWhen the battery is tested according to 5.5.2, and the battery is discharged, the terminal voltage is no less than 7.5V for 10s, the terminal voltage is no less than 7.2V for 30s, and the terminal voltage is no less than 6.0V for 90s (the terminal voltage at 90s is a reference value and can be selected by the manufacturer). When the battery is tested according to 5.9.1, the cycle period shall be no less than 4 cycles. When Class D parking vehicle batteries are tested according to 5.16, the service life shall be no less than those listed in Table 1.5 Test MethodsThe thermometer used to measure temperature shall have an appropriate range, its graduation value shall be no greater than 1°C, and the calibration accuracy of the thermometer shall be no less than 0.5°C. batteries need to be activated. After the battery is fully charged according to 5.2.2, it shall be kept at an ambient temperature of 25℃±2℃ according to the method of 5.2.4.6 Inspection Rules6.3 Determination rules 6.3.2 All test items evaluated based on test data shall be determined based on the test data of such item. 6.3.5 During the type inspection, when one sample test fails to meet the requirements, double sample test shall be conducted for a second time. If there is still one product that does not meet the standard requirements, it shall be judged as unqualified.7 Marking, Packaging, Transportation and Storage7.3.1 During transportation, the product shall not be subject to severe mechanical impact, exposure to sun or rain, and shall not be turned upside down. 7.4.2 It shall be protected from direct sunlight and shall be no less than 2m away from heat sources (heating equipment, etc.). 7.4.3 Avoid contact with any liquids and harmful substances, and no metal impurities shall fall into the product. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 5008.1-2023 be delivered?Answer: The full copy PDF of English version of GB/T 5008.1-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 5008.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5008.1-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 5008.1-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 5008.1-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5008.1-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 5008.1-2023?A step-by-step guide to download PDF of GB/T 5008.1-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 5008.1-2023". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
