GB/T 5008.2-2023 PDF EnglishUS$575.00 · In stock · Download in 9 seconds
GB/T 5008.2-2023: Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 5008.2: Historical versions
Similar standardsGB/T 5008.2-2023: Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5008.2-2023 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 29.220.20 CCS K 84 Replacing GB/T 5008.2-2013 Lead-acid starter batteries - Part 2.Dimensions of batteries and dimensions and marking of terminals (IEC 60095-2.2021, MOD) Issued on. NOVEMBER 27, 2023 Implemented on. JUNE 01, 2024 Issued by. State Administration for Market Regulation; National Standardization Administration. Table of ContentsForeword... 3 Introduction... 5 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 6 4 Symbols... 6 5 Battery model compilation and terminal polarity identification... 7 6 Battery classification and model... 9 7 Dimensions of battery terminals... 30 Appendix A (Informative) Comparison of structure numbers between this document and IEC 60095-2.2021... 34 Appendix B (Informative) Technical differences between this document and IEC 60095-2.2021 and their causes... 36ForewordThis document was drafted in accordance with the provisions of GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". This document is Part 2 of GB/T 5008 "Lead-acid starter batteries". GB/T 5008 has published the following parts. - Part 1.Technical conditions and methods of test; - Part 2.Dimensions of batteries and dimensions and marking of terminals; - Part 3.Kinds of products and specifications and dimensions and marking of terminals for heavy vehicles. This document replaces GB/T 5008.2-2013 "Lead-acid starter batteries - Part 2. Dimensions of batteries and dimensions and marking of terminals". Compared with GB/T 5008.2-2013, in addition to structural adjustments and editorial changes, the main technical changes are as follows. - CHANGE the scope of application (see Chapter 1; Chapter 1 of the 2013 edition); - ADD the terms and definitions (see Chapter 3); - CHANGE the content of symbols (see Chapter 4; Chapter 3 of the 2013 edition); - CHANGE the requirements for battery model compilation (see 5.1; 4.1 of the 2013 edition); - CHANGE the content of battery classification and model (see Chapter 6; Chapter 5 of the 2013 edition); - ADD the requirements for stud terminals (see 7.4). This document modifies and adopts IEC 60095-2.2021 "Lead-acid starter batteries - Part 2.Dimensions of batteries and dimensions and marking of terminals". Compared with IEC 60095-2.2021, this document has more structural adjustments. The comparison of structural number changes between the two documents is shown in Appendix A. Compared with IEC 60095-2.2021, this document has more technical differences, which are marked with a vertical single line (|) in the outer margin of the clauses involved. A list of these technical differences and their reasons is shown in Appendix B. Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume the responsibility for identifying patents. This document was proposed by the China Electrical Equipment Industry Association. This document shall be under the jurisdiction of the National Lead-acid Battery Standardization Technical Committee (SAC/TC 69). The drafting organizations of this document. Jiangsu Happy Power (Lianshui) Co., Ltd., Shenzhen Leoch New Energy Development Co., Ltd., Chaowei Power Group Co., Ltd., Zhejiang Guyue Power Co., Ltd., Fengfan (Yangzhou) Co., Ltd., Tianneng Battery Group Co., Ltd., Zhaoqing Leoch Power Technology Co., Ltd., Jiangxi Herunyu Power Technology Co., Ltd., Zhejiang Nandu Power Co., Ltd., Zhejiang Jujiang Power Manufacturing Co., Ltd., Guangdong Oakley Group Co., Ltd., Zhushan Qinba Barium Salt Co., Ltd., Shenyang Battery Research Institute Co., Ltd., Guangxi Xinfeng Power Technology Co., Ltd. The main drafters of this document. Qian Lijin, Dong Jie, Yang Yunzhen, Cao Miaogen, Li Gang, Hu Yan, Zhang Fanrong, Xiong Jianwen, Zhang Hengshan, Wang Yongdong, Shao Shuangxi, Li Shenglong, Luan Yundong, Liu Liang, Xu Shaopeng, Xu Zhiwei, Fu Fayou. The previous versions of this document and the documents it replaces are as follows. - It was first published in 1985 as GB/T 5008.2-1985 and GB/T 5008.3-1985.It was revised for the first time in 1991 and revised for the second time in 2005; - In the third revision in 2013, GB/T 5008.3-2005 "Starter batteries terminal size and markings" was incorporated; - This is the fourth revision.1 ScopeThis document specifies the model compilation and terminal polarity marking, battery model and classification, battery terminal position and terminal dimensions of lead-acid starter batteries (hereinafter referred to as batteries).2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, for dated references, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies to this document.3 Terms and definitionsThe terms and definitions defined in GB/T 2900.41 apply to this document.4 SymbolsThe names and symbols given in this document are shown in Table 1.5 Battery model compilation and terminal polarity identificationThe battery shall have a polarity identification on the terminal or cover. The symbol of the form "-" shall be used near the negative terminal.6 Battery classification and modelWhen the battery mass is less than or equal to 20 kg, it shall be designed to have no handle, one handle, or two handles; when the battery mass is greater than 20 kg, it can The frame and recess are integral parts of the battery trough; the battery can be fixed by means of the bottom of the battery trough.7 Dimensions of battery terminalsConical terminal classification T1 or T2 and the dimensions of the positive and negative terminals shall comply with Figure 29 and Table 14.Appendix A(Informative) Comparison of structure numbers between this document and IEC 60095-2.2021 ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 5008.2-2023 be delivered?Answer: The full copy PDF of English version of GB/T 5008.2-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 5008.2-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5008.2-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 5008.2-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 5008.2-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5008.2-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 5008.2-2023?A step-by-step guide to download PDF of GB/T 5008.2-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 5008.2-2023". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
