GB/T 45435-2025 English PDFUS$759.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 45435-2025: Technical requirements and test methods of BeiDou airborneequipment for aviation supplemental navigation Status: Valid
Basic dataStandard ID: GB/T 45435-2025 (GB/T45435-2025)Description (Translated English): Technical requirements and test methods of BeiDou airborneequipment for aviation supplemental navigation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E07 Classification of International Standard: 75.010 Word Count Estimation: 38,373 Date of Issue: 2025-03-28 Date of Implementation: 3/28/2025 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 45435-2025: Technical requirements and test methods of BeiDou airborneequipment for aviation supplemental navigation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. CCSE07 National Standard of the People's Republic of China Technical requirements for Beidou airborne equipment for aviation-aided navigation and test methods Released on 2025-03-28 2025-03-28 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 1 3.1 Terms and Definitions 1 3.2 Abbreviations 2 4 System composition 2 5 Requirement 3 5.1 Functional Requirements 3 5.2 Performance requirements 3 5.3 Interface Requirements 5 5.4 Reliability 5 6 Test Methods 5 6.1 Test Environment 5 6.2 Test equipment 6 6.3 Test Item 6 6.4 Functional Testing 7 6.5 Performance Testing 9 6.6 Interface Testing 21 6.7 Reliability Test 21 Appendix A (Normative) Standard receiving signal and interference environment 22 Appendix B (Normative) Positioning Accuracy Analysis Method 26 Appendix C (Normative) General Least Squares Solution and Weights in the Tropospheric Correction Algorithm 27 Appendix D (Normative) Receiver Autonomous Integrity Method 31 Reference 33ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the Equipment Development Department of the Central Military Commission. This document is under the jurisdiction of the National Satellite Navigation Standardization Technical Committee (SAC/TC544). This document was drafted by. Aerospace Star Technology Co., Ltd., COMAC Beijing Civil Aircraft Technology Research Center, Civil Aviation University of China, China Satellite Navigation Engineering Center, China Institute of Aerospace Standardization. The main drafters of this document are. Zhou Zhonghua, Yue Fuzhan, Zhang Zhan, Ma Zhenyang, Liu Ying, Li Zeming, Jiang Kexin, Meng Bin, Li Shenyang, Li Tieshuai, Jin, Z.-Wei, Wang, W.-J., Wang, P., and Zhu, B.IntroductionBeidou airborne equipment for aviation-aided navigation is based on the use of Beidou satellite navigation system by civil aviation industry users in transport aircraft and general aviation aircraft. It is an airborne dedicated terminal used by the target aircraft in the en-route phase to meet the actual application needs of the B1C frequency point for auxiliary navigation. The BeiDou airborne equipment specified in this document is expected to provide position/velocity/time (PVT) information to other airborne terminal equipment. A failure that causes erroneous information is a minor failure state, and a loss of function is a failure state with no safety impact. Beidou airborne navigation equipment refers to the relevant technical standards of my country's civil aviation. Generally, Beidou airborne equipment is divided into two types. Beta equipment and Gamma equipment, of which Beta equipment consists of independent Beidou airborne equipment, which is expected to be other terminal The terminal device provides information such as position/speed/time (PVT). The error information caused by the failure of Beta devices is a minor failure. Gamma equipment consists of Beidou airborne equipment and display and control devices, and has route guidance For devices with navigation and display functions, there is no standard minimum failure state category for Gamma devices. Record its functions when designing the device. Failure condition categories of loss and malfunction. In order to maintain the compliance of BeiDou airborne equipment with relevant civil aviation standards, the functions of BeiDou airborne equipment in this document are as follows. The energy and performance requirements are consistent with Beta equipment and are suitable for use on civil aircraft. Technical requirements for Beidou airborne equipment for aviation-aided navigation and test methods1 ScopeThis document specifies the technical requirements for BeiDou airborne equipment for aviation assisted navigation using BeiDou B1C signals and describes the corresponding tests. method. This document applies to the development, production, testing and acceptance of Beidou airborne equipment for aviation assisted navigation (hereinafter referred to as Beidou airborne equipment).2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 5080.7 Equipment reliability test - Failure rate and mean time between failures under the assumption of constant failure rate - Verification test plan GB/T 39267 Beidou Satellite Navigation Terminology GB/T 39413 Performance requirements and test methods for Beidou satellite navigation system signal simulator GB/T 39414.1-2020 BeiDou Navigation Satellite System Space Signal Interface Specification Part 1.Public Service Signal B1C 3 Terms, definitions and abbreviations 3.1 Terms and Definitions The terms and definitions defined in GB/T 39267 and the following apply to this document. 3.1.1 Alarm time timetoalert The time from when the fault is located to when the device issues an alarm. [Source. GB/T 42833-2023, 3.1.22] 3.1.2 Positioning failure The difference between the true position and the calculated position exceeds the corresponding horizontal protection level. 3.1.3 The radius of the circular horizontal area centered on the true position that contains the horizontal positioning position with 95% probability. 3.1.4 When the fault detection and elimination function is available, the radius of the circle centered on the true position that meets the requirements of missed alarms and failure elimination. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 45435-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 45435-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 45435-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 45435-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |