GB/T 4513.5-2017 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4513.5-2017: Monolithic (unshaped) refractory products -- Part 5: Preparation and treatment of test pieces Status: Valid
Basic dataStandard ID: GB/T 4513.5-2017 (GB/T4513.5-2017)Description (Translated English): Monolithic (unshaped) refractory products -- Part 5: Preparation and treatment of test pieces Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q40 Classification of International Standard: 81.080 Word Count Estimation: 18,114 Date of Issue: 2017-10-14 Date of Implementation: 2018-09-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 4513.5-2017: Monolithic (unshaped) refractory products -- Part 5: Preparation and treatment of test pieces---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Monolithic (unshaped) refractory products - Part 5. Preparation and treatment of test pieces ICS 81.080 Q40 National Standards of People's Republic of China Unshaped refractory material Part 5. Preparation and pretreatment of test specimens Monolithic (unshaped) refractoryproducts-Part 5. (ISO 1927-5.2012, MOD) 2017-10-14 Published 2018-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordGB/T 4513 "amorphous refractory" is divided into the following eight sections. --- Part 1. Introduction and classification; --- Part 2. Sampling; --- Part 3. Basic characteristics; --- Part 4. Determination of fluidity of castables; --- Part 5. Sample preparation and pretreatment; --- Part 6. Determination of physical properties; --- Part 7. Determination of preforms; --- Part 8. Determination of additional performance. This section GB/T 4513 Part 5. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the redrafted law Amendment uses ISO 1927-5.2012 "amorphous refractory materials Part 5. Preparation and pre-sample Reason. " This part of the structure compared with ISO 1927-5.2012 more adjustments, listed in Appendix A of this section and ISO 1927-5. 2012 chapter number control list. This section there are technical differences compared with ISO 1927-5.2012, the provisions of these differences have been passed in the outer margin of the page margin The vertical line (|) is marked. Appendix B lists the technical differences between this part and ISO 1927-5.2012 and the reason one Table. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This part of the National Refractories Standardization Technical Committee (SAC/TC193) and focal point. This section is responsible for the drafting unit. Sinosteel Luoyang Refractory Research Institute Co., Ltd., Henan Ruitai Refractory Technology Co., Ltd., MCC Wuhan Metallurgical Construction Research Institute Co., Ltd. The main drafters of this section. Zhang Yi, Zhai Jianwei, Wu Shujun, Liu Yunzheng, Guo Tengfei, Wu Jiaxuan, Jiang Dongmei, Yang Fan, Li Longfei, Ding Junjie, Xu Rulin, Xia Chang Yong. Unshaped refractory material Part 5. Preparation and pretreatment of test specimens1 ScopeThis section GB/T 4513 specifies the size of amorphous refractory sample, describes the preparation and pretreatment of the sample (curing, drying And heat treatment) method. This section applies to dense castable, insulation castable, refractory ramming material, refractory plastic and dry material.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 4513.1 amorphous refractory materials - Part 1 Introduction and classification (GB/T 4513.1-2015, ISO 1927-1.2012, MOD) GB/T 4513.4 amorphous refractory - Part 4. Determination of fluidity of castables (GB/T 4513.4-2017, ISO 1927-4.2012, MOD) GB 5749 drinking water health standards GB/T 6682 analytical laboratory water specifications and test methods (GB/T 6682-2008, ISO 3696.1987, MOD) GB/T 17732 dense shaped carbon-containing refractory products test method (GB/T 17732-2008, ISO 10060.1993, MOD)3 sample sizeThe sample size has the following types .A-shaped .230mm × 114mm × 64mm; B-shaped .230mm × 64mm × 54mm; C-shaped 230mm × 64mm × 64mm; D-shaped. 160mm × 40mm × 40mm. The width of the sample preparation as the test height, deviations should be recorded, C, D-shaped specimen molding surface should be marked. In addition to ramming Materials and dry materials, the sand can be used to prepare hammer hammer 50mm diameter and height of 50mm ± 1mm of the sample, a variety of materials, sample size Select Table 1. C-shaped laboratory arbitration sample size. The size of the sample chosen by the parties concerned to determine. Table 1 sample size type Castables Maximum particle size < 15mm Maximum particle size > 15mm B or C or DA Direct test b √ Other tests √ Direct test b √a Other tests √ Ramming material √ Plastic √ aB, C or D-shaped specimen can be A-shaped specimen cut. b There are no size restrictions. The test items that can be directly used for the results include the flexural strength, compressive strength at room temperature, the change of permanent heating lines and the geometric bulk density. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4513.5-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 4513.5-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4513.5-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4513.5-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
