GB/T 3007-2017 (GB/T 3007-2006) PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 3007-2006: Refractories -- Determination of moisture content Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Obsolete GB/T 3007: Historical versions
GB/T 3007-2006: Refractories -- Determination of moisture content---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3007-2006GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 81.080 Q 40 GB 3007-2006 Replacing GB/T 3007-1982 Refractory – Determination of Moisture Content Issued on: SEPTEMBER 20, 2006 Implemented on: FEBRUARY 1, 2007 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Definition... 4 4 Principle... 4 5 Equipment... 5 6 Sampling... 5 7 Test Procedure... 5 8 Calculation and Determination of Results... 5 9 Test Report... 6 Refractory – Determination of Moisture Content1 ScopeThis Standard specifies the definition of and test method for moisture content of refractory. This Standard applies to the determination of moisture content of refractory materials and products. This Standard does not apply to the refractory materials containing volatile organic matters under the measuring temperature.2 Normative ReferencesThe provisions in following documents become the provisions of this Standard through reference in this Standard. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest editions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB/T 8170 Rules of Rounding off for Numerical Values GB/T 17617-1998 Refractory Products--Sampling of Raw Materials and Unshaped Products3 DefinitionMoisture content It is the ratio between the mass of free water contained in a refractory material sample and the original mass of the sample, with the values expressed in %.4 PrincipleThe sample of a refractory material is dried at 105°C to 110°C and its loss in mass is the mass of free water contained by the sample. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. |
