GB/T 44275.11-2024 English PDFUS$639.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 44275.11-2024: Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 11: Guidelines for the formulation of terminology Status: Valid
Basic dataStandard ID: GB/T 44275.11-2024 (GB/T44275.11-2024)Description (Translated English): Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 11: Guidelines for the formulation of terminology Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Word Count Estimation: 32,343 Date of Issue: 2024-08-23 Date of Implementation: 2024-08-23 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 44275.11-2024: Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 11: Guidelines for the formulation of terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 25.040.01 CCSN10 National Standard of the People's Republic of China Industrial Automation Systems and Integration Open Technical Dictionary and Its Application in Master Data Part 11.Guidelines for the development of terminology terminology (ISO 22745-11.2010,MOD) Released on 2024-08-23 2025-03-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Abbreviations 2 5 Basic Concepts and Assumptions 2 6 General Principles 3 7 Guidelines for the Development of English Terminology 4 8 Guidelines for the Development of English Definitions13 9 Conformity requirements17 10 Term Limitation 17 Appendix A (Normative) Document Identification 20 Appendix B (Informative) Restricted Expressions 21 Reference 22ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 11 of GB/T 44275 "Industrial Automation Systems and Integration Open Technology Dictionary and Its Application in Master Data" GB/T 44275 has published the following parts. --- Part 1.Overview and basic principles; --- Part 2.Terminology; --- Part 11.Guidelines for the development of terminology; --- Part 13.Identification of concepts and terms; --- Part 20.Maintenance procedures for the open technical dictionary. This document is modified to adopt ISO 22745-11.2010 "Industrial Automation Systems and Integration Open Technology Dictionary and its Application in Master Data" Part 11.Guidance for the development of terminology. Compared with ISO 22745-11.2010, this document deletes Annex B of ISO 22745-11.2010. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Automation System and Integration Standardization Technical Committee (SAC/TC159). This document was drafted by. China National Institute of Standardization, Jinhua Gaoge Software Co., Ltd., Suzhou Deji Automation Technology Co., Ltd., Qingdao Yufang Robot Industry Co., Ltd., Shenzhen Yiwei Technology Co., Ltd., Shenzhen Nuofeng Optoelectronic Equipment Co., Ltd., Jiangsu Daojin Intelligent Manufacturing Technology Co., Ltd., Hubei Huazhong Electric Power Technology Development Co., Ltd., Hunan Shentuo Intelligent Equipment Co., Ltd., Anhui Dingli Network Technology Co., Ltd., Fujian Heying Machinery Co., Ltd., Shenzhen Pingchen Semiconductor Technology Co., Ltd., Shenzhen Xinsai Keke Technology Development Co., Ltd., Cixi Dahua Electric Co., Ltd., Wuhan Fenjin Intelligent Machinery Co., Ltd., Wuxi Lead Intelligent Equipment Co., Ltd. Company, Hitachi Building Technology (Guangzhou) Co., Ltd. The main drafters of this document are. Liu Shouhua, Zheng Songbo, Lin Huancheng, Liu Liancheng, Chen Hui, Xu Lifeng, Fan Yongming, Jin Bing, Yu Xuekun, Gao Song, Shi Yihong, Yang Jun, Sheng Feng, Wang Lihua, Xu Jishui, Wang Zhiqiang, Xu Kaicheng, Yang Qinghai, Yue Gaofeng, Wang Shumin, Wen Na, Gao Liang, Yin Shurui, Zhong Zhaofeng, Ding Xiaolong, and Hu Xin.IntroductionThe descriptive technical system specified in GB/T 44275 includes. ---Open Technical Dictionary (OTD); --- Identification Guide (IG); ---Master data; ---Identification mode; ---Procedures for maintaining OTD; ---Interface for querying information from OTD, including terms related to a given concept. GB/T 44275 "Industrial Automation Systems and Integration Open Technology Dictionary and Its Application in Master Data" is intended to consist of the following parts. --- Part 1.Overview and basic principles. The purpose is to explain the overall architecture, basic principles and Principles and basic concepts. --- Part 2.Terminology. The purpose is to provide the terms and vocabulary used in the GB/T 44275 series of standards. --- Part 10.Dictionary representation. The purpose is to provide a conceptual model of OTD for computer-to-computer exchange of OTD XML schema for the XML physical file. --- Part 11.Guidelines for the development of terminology. The purpose is to provide guidelines for the development of terminology and the definition of concepts in open technical dictionaries. --- Part 13.Identification of concepts and terms. The purpose is to identify concepts, terms, Definitions and image identification rules, and the syntax of identifiers. --- Part 14.Dictionary query interface. The purpose is to provide query interface definitions and web service bindings supported by OTD. --- Part 20.Maintenance procedures for open technical dictionaries. The purpose is to standardize the maintenance procedures, publication rules, changes and Change programs, add programs, and maintain organizational structures. --- Part 30.Identification Guide Representation. The purpose is to provide the conceptual model and exchange format of IG. --- Part 35.Querying feature data. The purpose is to provide a conceptual model and exchange format for querying feature data. --- Part 40.Master data representation. The purpose is to provide a conceptual model and exchange format for master data. --- Part 50.Registration of Open Technical Dictionaries. The purpose is to provide the structure and operate. --- Part.200.Implementation guidance for incorporating master data into ISO 10303 product data. The purpose is to provide guidance on incorporating master data into ISO 10303 product data. The general requirements for directory data are represented in the data set of the Application Protocol (AP). --- Part 300.Master Data Guide. The purpose is to provide a common template for commonly used master data types. OTD is a term defined and derived from consensus bodies such as ISO, IEC, and other organizations that have a consensus process for developing terminology. OTD is a collection of terms, definitions, and images used to describe concepts such as individuals, organizations, locations, goods, and services. In GB/T 44275, items are described by membership in a class and a set of attribute-value pairs. OTD. --- Allows attributes to be explicitly defined in ISO 10303; --- Allowing information to be clearly defined and exchanged between multinational partners without loss of meaning; ---Supports database synchronization with minimal data mapping requirements; ---Provide transparent information flow between multiple information formats, especially between government and commercial systems; ---Provide timely and accurate data to support financial and accounting processes; ---Support cost-effective procurement; ---Support inventory management and rationalization; ---Provide commercial and intergovernmental affairs; ---Support multiple units of measurement and international currencies; ---Support multiple categories and multiple languages. Any consensus organization can submit terms for inclusion in the OTD. GB/T 44275 does not establish a new process for standardizing terms. An OTD will provide a globally unambiguous identifier for each concept and provide a reference to the original term (term, definition and image). The OTD aims to link terms and definitions with the same semantic content and to cite the original source of each term and definition. Duplicate existing standards and instead provide a comprehensive collection of terms for describing people, organizations, locations, goods, and services. Although the process of harmonizing terminology is beyond the scope of GB/T 44275, the OTD can be used as a useful research tool to assist in the coordination of Coordination process, such as the coordination process between ISO, IEC and other standards. The IG specifies which concepts are used and constrains which concepts are linked to each other. An example of the latter is when the IG specifies attributes that are linked to classes. Additionally, where there are multiple terms, definitions and images for a concept, the IG specifies which terms, definitions and images are applicable. Master data is data held by an organization that describes entities that are both independent and fundamental to the organization and that need to be referenced in order to be used. Execute its business. A directory represents master data in the form of attribute-value pairs. For a more detailed overview of GB/T 44275, see GB/T 44275.1. This document provides suggested guidelines for the development of cataloguing concept terms. Note. Concept terms include terms, definitions and images. Inclusion of a term or definition in an OTD does not require compliance with these guidelines. The OTD provides a framework to ensure consistency and understandability of definitions. Terms that meet these guidelines will be noted in the OTD. This will support users in Run a search to filter terms that match this document. The examples in this document are selected and simplified for ease of explanation. When converting to other languages, you may need to select other examples. illustrate. The guidance and examples for developing terminology in Chapter 7, the guidance and examples for developing definitions in Chapter 8, and the guidance and examples for developing terms in Chapter 10 are provided in Chapter 11. The examples in Chapters 7 and 8, as well as Chapter 10, do not need to be converted, but are based on each language. Subsequent versions of this document may include Chapters 7, 8 and 10 for languages other than English. Adjustment. Industrial Automation Systems and Integration Open Technical Dictionary and Its Application in Master Data Part 11.Guidelines for the development of terminology1 ScopeThis document provides recommended guidelines for developing definitions of terms and concepts in the Open Technology Dictionary (OTD). NOTE 1.The current version of this document does not contain guidance on the development of images for cataloguing concepts. Such guidance may be added in subsequent versions. NOTE 2.Compliance with these guidelines is not required for inclusion of a term or definition in the open technical dictionary. These guidelines provide a basis for industry terminologists to The framework will be developed to ensure consistency and understandability of definitions. Terms that meet these guidelines will be noted in the Open Technology Dictionary. This will allow users to Run a search to filter terms that match this document. This document applies to terminology that is standardized in the development or maintenance of open technical dictionaries. This document does not apply to terminology obtained from consensus organizations. Terminology,These organizations standardize terminology before submitting it for inclusion in the Open Technology Dictionary. The following contents fall within the scope of this document. --- General provisions; ---Guidelines for the development of English terminology; ---Guidelines for the development of English definitions. Note 3.Concepts represented in the Open Technology Dictionary include. ---kind; ---characteristic; ---Function; ---express; ---Units of measurement; ---Metrology calibration; ---Characteristic value; ---currency; ---Data type. The following are outside the scope of this document. --- Identifiers of concepts, terms, definitions and images; ---Open Technical Dictionary Maintenance Program. Appendix A specifies the document identifiers for this document.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. ISO 22745-2 Industrial automation systems and integration open technical dictionary and its application to master data Part 2.Terminology tomasterdata-Part 2.Vocabulary) Note. GB/T 44275.2-2024 Industrial Automation Systems and Integration Open Technology Dictionary and its Application in Master Data Part 2.Terminology ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 44275.11-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 44275.11-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 44275.11-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 44275.11-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
