GB/T 43846.1-2024 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43846.1-2024: Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 43846.1-2024	279	Add to Cart	3 days	Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan	Valid

Similar standards

GB/T 17360   GB/T 22062   GB/T 32387   GB/T 43847   GB/T 26600   GB/T 43846.3   

Basic data

Standard ID: GB/T 43846.1-2024 (GB/T43846.1-2024)
Description (Translated English): Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N32
Classification of International Standard: 37.020
Word Count Estimation: 14,143
Date of Issue: 2024-04-25
Date of Implementation: 2024-11-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 43846.1-2024: Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 37:020 CCSN32 National Standards of People's Republic of China Nomenclature of microscope objectives Part 1: Image field flatness/field flatness Part 1: Flatness of field/Plan (ISO 19012-1:2013,MOD) Released on 2024-04-25 2024-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Requirement 2 4:1 Sign 2 4:2 Determination of flat field objective 2 4:3 Determination of the number of draws 2 Appendix A (Informative) Calculation of Depth of Field in Object Space Using the Bellec Formula 3 A:1 Berek's formula 3 A:2 Depth of field of the objective lens calculated using the Bellec formula 3 References 6

Foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document is Part 1 of GB/T 43846 "Nomenclature of microscope objectives": GB/T 43846 has been published for the following part: --- Part 1: Image field flatness/flat field; --- Part 2: Chromatic aberration correction; --- Part 3: Spectral transmittance: This document is modified to adopt ISO 19012-1:2013 "Microscopes - Nomenclature of microscope objectives - Part 1: Image field flatness/flat field": The technical differences between this document and ISO 19012-1:2013 and their reasons are as follows: --- Deleted "The mark of the objective field number is not applicable to the objective sold before:2014:" (see 4:1) to comply with the Chinese standard Use habit: The following editorial changes were made to this document: --- Deleted "ISO 10934-1" in the note (see Chapter 1); --- Change "(unit is millimeters)" to "Note" (see 3:6); --- Change "expressed as: PFR = PFN/OFN" to "Note" (see 3:8); --- Add "(wavelength is 546:07nm)" in formula (2) (see 4:3); --- Added explanation of the item number and symbols in formula (A:1) (see Appendix A): Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the China Machinery Industry Federation: This document is under the jurisdiction of the National Technical Committee for Standardization of Optics and Photonics (SAC/TC103): This document was drafted by: Nanjing Donglilai Optoelectronics Industry Co:, Ltd:, Shanghai Qianxin Instrument Co:, Ltd:, Guangzhou Yuexian Optical Instrument Limited Liability Company, Fujian Foco Optoelectronics Co:, Ltd:, Motic Industrial Group Co:, Ltd:, University of Shanghai for Science and Technology, Ningbo Yongxinguang Co:, Ltd:, Guangzhou Mingmei Optoelectronics Technology Co:, Ltd:, Wuzhou Aoka Optical Instrument Co:, Ltd:, Ningbo Zhanjing Optical Instrument Co:, Ltd: Company, Suzhou Ruifei Optoelectronics Technology Co:, Ltd:, Ningbo Huaguang Precision Instrument Co:, Ltd:, Guangzhou Jinghua Precision Optics Co:, Ltd:, Shanghai Xiongbo Precision Instrument Co:, Ltd:, Nanjing Jiangnan Yongxin Optics Co:, Ltd:, Ningbo Teaching Instrument Co:, Ltd:, Jiangxi Phoenix Optics Science and Technology Co:, Ltd:, Shanghai Institute of Optical Instruments, Micro-Instrument Optoelectronics (Tianjin) Co:, Ltd:, Chongqing Aote Optical Instrument Co:, Ltd:, Shanghai Weishirui Optoelectronics Technology Co:, Ltd:, Ningbo Sunny Optical Instruments Co:, Ltd:, Shenzhen Aikexue Education Technology Co:, Ltd: The main drafters of this document are: Hong Yiping, Hua Yue, Li Migao, Huang Muwang, Chen Muwang, Zhang Wei, Cui Zhiying, Zhang Chunwang, Zhang Tao, Gan Linchao, Wan Xinjun, Kong Yanbo, He Jian, Zhu Yongjin, Yao Chen, Wang Guorui, Gao Bo, Feng Qionghui, Zhang Chang, Wu Guomin, Wang Weisheng, Hu Senhu, Zhang Qian:

Introduction

With the rapid development of various scientific and technological fields at home and abroad, microscopes are widely used in scientific research, teaching, medical care and industrial manufacturing: In the optical system, the microscope objective is an important part of various types of optical microscopes: It is the first light to form an image of an object: It is an important component to ensure the clear imaging of the microscope: Therefore, when designing and naming the microscope objective, it is necessary to consider the microscope The parameters and functions of the objective lens enable the optical microscope to function normally in various applications, thus ensuring the quality of the optical microscope product: Design, quality and application, promote coordination among enterprises and improve production efficiency: In view of the above reasons, it is very important to standardize and normalize the naming of microscope objectives according to the relevant parameters and functions of different types of objectives: Very necessary: GB/T 43846 "Nomenclature of microscope objectives" contains the terms, signs, logos and requirements of objectives, and is based on Objective lenses are named according to their parameters and functions: GB/T 43846 is divided into three parts: --- Part 1: Image field flatness/flat field: The purpose is to specify the use of the "flat field" mark on the microscope objective and define the flat field: The diameter of the clear image area on the object's surface: --- Part 2: Chromatic aberration correction: The purpose is to specify the categories of chromatic aberration correction and the minimum requirements for chromatic aberration correction: --- Part 3: Spectral transmittance: The purpose is to specify the way in which optical designers and microscope users describe the spectral transmittance of objectives: Nomenclature of microscope objectives Part 1: Image field flatness/field flatness

1 Scope

This document specifies the use of the notation "Flat Field" on microscope objectives, which defines the diameter of the region of sharp focus of the principal image on a flat object surface: This document applies to visual observations using the objective, tube lens, and eyepiece combinations specified by the manufacturer: The objective lens designations in this document are consistent with ISO 8578: NOTE: Flatness of field does not imply any degree of correction for other aberrations:

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: Note: GB/T 27668-2023 Microscopes - Optical microscopy - Terminology (ISO 10934:2020, MOD):

3 Terms and definitions

For the purposes of this document, the terms and definitions defined in ISO 10934 and the following apply: 3:1 An object containing several short lines perpendicular to the object field radius: 3:2 All meridian structure objects are focused and imaged clearly in the main image space, ignoring other curvatures except astigmatism and Petzvan curvature: Aberration: 3:3 An object containing several short lines parallel to the object field radius: 3:4 Sagittal image surface All sagittal objects are focused and imaged clearly in the principal image space, ignoring other aberrations except astigmatism and Petzvan curvature: 3:5 astigmatic difference The size difference between the sagittal image plane and the image plane along the optical axis in the meridional plane: 3:6 Planfield number planfieldnumber; PFN A numerical value used to specify the diameter of the main image clear area on the surface of a planar object: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 43846.1-2024_English be delivered?

Answer: Upon your order, we will start to translate GB/T 43846.1-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 43846.1-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 43846.1-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.