GB/T 26600-2024 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26600-2024: Microscopes - Immersion liquid for light microscopy Status: Valid GB/T 26600: Historical versions
Basic dataStandard ID: GB/T 26600-2024 (GB/T26600-2024)Description (Translated English): Microscopes - Immersion liquid for light microscopy Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N32 Classification of International Standard: 37.020 Word Count Estimation: 14,160 Date of Issue: 2024-04-25 Date of Implementation: 2024-11-01 Older Standard (superseded by this standard): GB/T 26600-2011 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 26600-2024: Microscopes - Immersion liquid for light microscopy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 37:020 CCSN32 National Standards of People's Republic of China Replaces GB/T 26600-2011 Immersion fluids for light microscopy (ISO 8036:2015,MOD) Released on 2024-04-25 2024-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Categories 1 5 Characteristics of the immersion liquid 1 6 Minimum Requirements 3 7 Ingredients 4 8 Identification of immersion liquid 4 9 Container labeling 4 10 Technical data sheet 4ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document replaces GB/T 26600-2011 "Immersion fluids for optical microscopy": Compared with GB/T 26600-2011, In addition to structural adjustments and editorial changes, the main technical changes are as follows: --- Change "immersion oil" to "immersion liquid" (see Chapter 4, Chapter 3 of the:2011 edition); --- Change "mercury-cadmium spectrum lamp" to "spectrum lamp with wavelengths of 546:07nm, 479:99nm and 643:85nm" (see 5:1,:2011 4:1 of the year); --- Change “Broade viscometer” to “Ubbelode viscometer” (see 5:4, 4:4 of the:2011 edition); --- Change "mixture" to "ingredient" (see Chapter 7, Chapter 6 of the:2011 edition); --- Deleted "The manufacturer shall provide users with products that comply with EU Technical Regulation 91/155/EEC and its amendment 93/112/EEC and 01/58/EC required safety data sheet: ” (see Chapter 6 of the:2011 edition): This document is modified to adopt ISO 8036:2015 “Immersion fluids for optical microscopy”: This document has the following structural adjustments compared to ISO 8036:2015: --- Added a chapter on "Terms and Definitions"; --- Chapter 4, Chapter 6 to Chapter 10 correspond to Chapter 3, Chapter 5 to Chapter 9 of ISO 8036:2015 respectively; --- Chapter 5 corresponds to Chapter 4 of ISO 8036:2015, and adds 5:6 and 5:7: The technical differences between this document and ISO 8036:2015 and their reasons are as follows: --- Change "immersion oil" to "immersion liquid" (see Chapter 4) to meet the technical requirements used in my country; --- Added "ne---refractive index at a wavelength of 546:07nm;" (see 5:1) to conform to the standard terminology of my country; --- Change "mercury-cadmium spectrum lamp" to "spectrum lamp with wavelengths of 546:07nm, 479:99nm and 643:85nm" (see 5:1): Meet the technical requirements of our country; --- Added the technical requirements of "chemical properties" (see 5:6) and "appearance" (see 5:7) to adapt to my country's technical conditions and ensure Safety and reliability of use: The following editorial changes were made to this document: --- Changed the examples in Chapter 8; --- Combine the reference temperature tolerance in Table 1 into the reference temperature column: Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the China Machinery Industry Federation: This document is under the jurisdiction of the National Technical Committee for Standardization of Optics and Photonics (SAC/TC103): This document was drafted by: Wuzhou Aoka Optical Instrument Co:, Ltd:, Guangzhou Jinghua Precision Optics Co:, Ltd:, Ningbo Sunny Optical Instruments Co:, Ltd:, Shanghai University of Technology, Ningbo Huaguang Precision Instrument Co:, Ltd:, Shanghai Qianxin Instrument Co:, Ltd:, Ningbo Teaching Instrument Co:, Ltd: Company, Motic Industrial Group Co:, Ltd:, Ningbo Yongxin Optics Co:, Ltd:, Nanjing Donglilai Optoelectronics Industry Co:, Ltd:, Guangzhou Guangdong Xian Optical Instrument Co:, Ltd:, Jiangxi Phoenix Optical Technology Co:, Ltd:, Shanghai Optical Instrument Research Institute, Suzhou Ruifei Optoelectronics Technology Co:, Ltd: Co:, Ltd:, Ningbo Xingxiang Optoelectronics Technology Co:, Ltd:, Nanjing Jiangnan Yongxin Optics Co:, Ltd:, China University of Metrology, Weiyi Optoelectronics (Tianjin) Co:, Ltd: Company, Shanghai Weishirui Optoelectronics Technology Co:, Ltd: The main drafters of this document are: Zhang Tao, He Jian, Hu Senhu, Zhang Wei, Kong Yanbo, Hua Yue, Wang Guorui, Chen Muwang, Cui Zhiying, Hong Yiping, Xu Tao, Gao Bo, Feng Qionghui, Wan Xinjun, Bao Jinquan, Yao Chen, Zhang Shuqin, Zhang Chang, and Wang Weisheng: The previous versions of this document and the documents it replaces are as follows: ---First published in:2011 as GB/T 26600-2011; ---This is the first revision:IntroductionWith the rapid development of various international and domestic scientific and technological fields, optical microscopes are widely used in scientific research, teaching, medical and health care, and In the modern optical microscope industry, especially in high-magnification microscopes, optical microscopy immersion fluids are widely used: Companies that mass produce optical microscopy solutions differ in their labeling methods, container label information and technical data sheets, and application procedures: This seriously affects the application of products and the evaluation of product performance: It is necessary to standardize and unify the numbers to improve the scientific research speed and product application of optical microscopes: In view of the above reasons, in order to improve the production efficiency of enterprises, promote coordination between enterprises, and improve the research and development of scientific research projects and new products, In order to speed up the development of optical microscopy solutions, it is necessary to standardize and regularize the identification, labeling information, technical data sheets and methods of use of optical microscopy solutions: Immersion fluids for light microscopy1 ScopeThis document describes the characteristics of immersion fluids used in microscopy, classifies them according to their application, and specifies the requirements for each type of immersion fluid: The corresponding test methods are described: This document specifies the method of identification of immersion liquids, the information to be included on the container label and the information to be provided on the technical data sheet:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: ISO 2592 Petroleum and related products Determination of flash point and fire point Cleveland open cup method Note: GB/T 3536-2008 Determination of flash point and fire point of petroleum products - Cleveland open cup method (ISO 2592:2000, MOD) ISO 8255-1 Microscope cover glasses - Part 1: Dimensional tolerances, thickness and optical properties (Microscopes-Coverglas- ISO 8255-2 Microscope cover glasses Part 2: Material quality, processing and packaging methods (Microscopes-Coverglas-3 Terms and definitionsThere are no terms or definitions that require definition in this document:4 CategoriesDepending on the application, immersion liquids are divided into the following three categories: ---Type N: Immersion fluid for ordinary visible light microscopy: ---Type F: Immersion fluid suitable for fluorescence microscopy: ---Type G: Spectral pure glycerine (scientific name: propylene glycol) for glycerine immersion:5 Characteristics of the immersion liquid5:1 Optical properties The optical properties of the immersion liquid are determined by the refraction at a wavelength of 546:07 nm at a specified temperature (23°C) and atmospheric pressure (101:325 kPa): The rate ne, and the Abbe number νe are defined: The Abbe number νe is calculated according to formula (1): νe= ne-1 nF'-nC' (1) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26600-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 26600-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26600-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26600-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 26600-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26600-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |