GB/T 43780-2024 English PDFUS$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 43780-2024: General technical requirements for manufacturing equipment intellectualization Status: Valid
Basic dataStandard ID: GB/T 43780-2024 (GB/T43780-2024)Description (Translated English): General technical requirements for manufacturing equipment intellectualization Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P84 Classification of International Standard: 25.040 Word Count Estimation: 14,126 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 43780-2024: General technical requirements for manufacturing equipment intellectualization---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.CCSP84 National Standards of People's Republic of China General technical requirements for intelligent manufacturing equipment Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical Requirements 2 4.1 General 2 4.2 IntelliSense 2 4.3 Monitoring and diagnosis 3 4.4 Adaptation and Optimization 4 4.5 Interaction and Collaboration 4 4.6 Interconnection and Integration 5 4.7 Digital Modeling and Simulation 6 4.8 Data and Information Services 7 5 Evaluation Requirements 7 Appendix A (Informative) Intelligent Assessment Method 9 Reference 10ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Industrial Process Measurement, Control and Automation Standardization Technical Committee (SAC/TC124). This document was drafted by. Mechanical Industry Instrumentation Comprehensive Technical and Economic Research Institute, China Shipbuilding Industry Corporation 716 Research Institute Institute, Suzhou Saiteng Precision Electronics Co., Ltd., Maide Medical Industrial Equipment Co., Ltd., Beijing Hollysys Intelligent Technology Co., Ltd. Company, Shenyang Institute of Automation, Chinese Academy of Sciences, Wuzhong Instrument Co., Ltd., Huawei Technologies Co., Ltd., Beijing Hollysys System Engineering Co., Ltd., Beijing Dongtu Technology Co., Ltd., CRRC Qingdao Sifang Locomotive and Rolling Stock Co., Ltd., Dongfang Electric Group Science and Technology Research Institute Co., Ltd., Guizhou Aerospace Electric Co., Ltd., Beijing Aerospace Metrology and Testing Technology Research Institute, Qinchuan Machine Tool Group Co., Ltd., ZTE Corporation, Beijing University of Aeronautics and Astronautics, Beijing Jingdiao Technology Group Co., Ltd., Siemens (China) Co., Ltd., Schneider Electric De Electric (China) Co., Ltd., Chongqing Mengxun Electronic Technology Co., Ltd., Shandong Boshi Pengcheng Intelligent Technology Co., Ltd., and Hunan University of Science and Technology. The main drafters of this document are. Fang Yifang, Du Mengxin, Chen Weibin, Liu Yanwei, Lin Junhua, Jia Feng, Liu Tao, Song Yanyan, Zhang Hualiang, Wang Xuepeng, Fu Haifang, Wu Dayuan, Wu Yaping, Gao Shan, Yan Zhiwei, Jia Guangyue, Wang Liwen, Wang Hongliang, Qin Ling, Zhang Xiujian, Zhang Yunhua, Luo Jian, Zhu Hongjun, Li Qingxin, Xu Dan, Zhang Baoquan, Zhu Guoliang, Yan Xinhua, Jia Hua, Yang Panpan, Zhao Wanlin, Zheng Yiran, Chen Jing, Liang Le, Lin Ying, Ma Lixin, Cheng Jixun, Zhang Fan. General technical requirements for intelligent manufacturing equipment1 ScopeThis document specifies the technical requirements and evaluation requirements for intelligent manufacturing equipment. This document is applicable to the design, optimization, transformation and evaluation of intelligent manufacturing equipment.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 17178.1-1997 Information technology Open systems interconnection conformance test methods and framework Part 1.Basic concepts GB/T 30976.2 Industrial control system information security Part 2.Acceptance criteria IEC 61158-1.2023 Fieldbus Specification for Industrial Communication Networks Part 1.Overview of the IEC 61158 and IEC 61784 series for theIEC 61158 and IEC 61784 series)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Equipment used in the design, production/manufacturing, management and service processes to complete specific manufacturing process (procedure) operations. Note. Includes manufacturing equipment hardware, embedded software and intelligent software, etc. 3.2 Intellectualization The object (device, equipment or terminal) has the ability to analyze and judge objective things reasonably, act purposefully and effectively handle the surrounding environment. The state or process of being able to respond to environmental matters. Note. The intelligent capabilities of manufacturing equipment are represented by intelligent features and are actually reflected through specific intelligent functions. 3.3 It can complete predetermined functions and tasks and exhibit various characteristics similar to human intelligence (such as reasoning and learning). Note. Intelligent features are divided into intelligent perception, monitoring and diagnosis, adaptation and optimization, interaction and collaboration, interconnection and integration, digital modeling and simulation, and data and information Services, etc. 3.4 Intelligent functioninteligent function The specific functions implemented by the manufacturing equipment (3.1) under the intelligent features (3.3). Note. This includes the functions of the equipment itself, or the functions achieved with the help of intelligent technology and its intelligent auxiliary system. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43780-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43780-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 43780-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43780-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
