GB/T 4324.5-2012 English PDFUS$359.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4324.5-2012: Methods for chemical analysis of tungsten -- Part 5: Determination of arsenic content -- Hydrogenate atomic absorption spectrometry Status: Obsolete GB/T 4324.5: Historical versions
Basic dataStandard ID: GB/T 4324.5-2012 (GB/T4324.5-2012)Description (Translated English): Methods for chemical analysis of tungsten -- Part 5: Determination of arsenic content -- Hydrogenate atomic absorption spectrometry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H63 Classification of International Standard: 77.120.99 Word Count Estimation: 9,939 Older Standard (superseded by this standard): GB/T 4324.5-1984 Regulation (derived from): National Standards Bulletin No. 41 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the tungsten powder, tungsten, tungsten trioxide, tungsten blue, purple, tungsten, tungsten carbide, tungsten acid, ammonium metatungstate paratungstate Determination of arsenic. This section applies to tungsten powder, tungsten, t GB/T 4324.5-2012: Methods for chemical analysis of tungsten -- Part 5: Determination of arsenic content -- Hydrogenate atomic absorption spectrometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Methods for chemical analysis of tungsten Part 5. Determination of arsenic content Hydrogenate atomic absorption spectrometry ICS 77.120.99 H63 National Standards of People's Republic of China Replacing GB/T 4324.5-1984 Chemical analysis of tungsten Part 5. Determination of arsenic content Hydride generation atomic absorption spectrometry Part 5. Determinationofarseniccontent- Issued on. 2012-12-31 2013-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 4324 "chemical analysis of tungsten" is divided into 28 parts. --- Part 1. Determination of lead content - flame atomic absorption spectrometry; --- Part 2. Determination of bismuth content hydride generation atomic absorption spectrometry; --- Part 3. Determination of tin content hydride generation atomic absorption spectrometry; --- Part 4. Determination of antimony content hydride generation atomic absorption spectrometry; --- Part 5. Determination of arsenic content by hydride generation atomic absorption spectrometry; --- Part 6. Determination of iron content of phenanthroline spectrophotometry; --- Part 7. Determination of cobalt content by inductively coupled plasma atomic emission spectrometry; --- Part 8. Determination of the amount of nickel by inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry Diacetyldioxime Gravimetric method; --- Part 9. Determination of cadmium content by inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry; --- Part 10. Determination of copper content - Flame atomic absorption spectrometry; --- Part 11. Determination of aluminum content by inductively coupled plasma atomic emission spectrometry; --- Part 12. Determination of the amount of silicon tetrachloride - molybdenum blue spectrophotometric method; --- Part 13. Inductively coupled plasma calcium atomic emission spectrometry; --- Part 14. Chlorinated Volatile residue amount after Gravimetric method; --- Part 15. Determination of magnesium content - Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry; --- Part 16. Determination of loss on ignition - Gravimetric method; --- Part 17. Determination of sodium content by flame atomic absorption spectrometry; --- Part 18. Determination of potassium content by flame atomic absorption spectrometry; --- Part 19. Determination of titanium content of two methane antipyrine spectrophotometry; --- Part 20. vanadium content - Inductively coupled plasma atomic emission spectrometry; --- Part 21. Determination of chromium content by inductively coupled plasma atomic emission spectrometry; --- Part 22. manganese content - Inductively coupled plasma atomic emission spectrometry; --- Part 23. Determination of sulfur content of combustion conductance method and frequency combustion infrared absorption method; --- Part 24. Determination of phosphorus content - Molybdenum blue spectrophotometric method; --- Part 25. Determination of oxygen pulse heating inert gas fusion - infrared absorption method; --- Part 26. Determination of nitrogen pulse heating inert gas fusion - thermal conductivity method and Nessler reagent spectrophotometric method; --- Part 27. Determination of carbon content in the high-frequency combustion infrared absorption method; --- Part 28. Determination of molybdenum content - Thiocyanate spectrophotometric method. This section GB/T 54324 Part of. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 4324.5-1984 "chemical analysis of tungsten and molybdenum blue photometric method for determination of arsenic content." This portion of the GB/T 4324.5- Compared to 1984, the main technical changes are as follows. --- Determination by the "molybdenum blue photometric method" to "hydride generation atomic absorption spectrometry"; --- Range of tungsten added blue, purple tungsten, tungsten carbide, ammonium paratungstate, measured by the scope of "0.00008% to 0.020%" with "0.00005% ~ 0.020% "; --- In order to ensure the application of different sample dissolution methods in the "sample" in the fine, the average particle size of the tungsten carbide coarse particles were defined; --- The "measurement frequency" in the "three" to "independently of the two measurements, the average value"; --- Tungsten powder, tungsten, tungsten oxide, tungstic acid, ammonium paratungstate were modified sample dissolution method, an increase of tungsten blue, purple tungsten, tungsten carbide, metatungstate Ammonium dissolving method; --- Increasing the foreword, precision and test reports, and a standard format editing. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is drafted. Chenzhou Diamond Tungsten Products Co., Ltd., Ganzhou Nonferrous Metallurgy Research Institute, Hunan Nonferrous Metals Co. Shizhuyuan Liability company. The main drafters of this section. Du just, Hou Guiqiong, Luo Kai, Ouyang Zi Jing, Chen Tao, Zhongdao Guo, Yang Feng, Wangzhou Lin, Chen Xiaohong. This part of the standard replaces the previous editions are. --- GB/T 4324.5-1984. Chemical analysis of tungsten Part 5. Determination of arsenic content Hydride generation atomic absorption spectrometry1 ScopeGB/T 4324 provisions of this part of the tungsten powder, tungsten trioxide, tungsten, tungsten blue, purple tungsten, tungsten carbide, tungsten acid, ammonium metatungstate, ammonium paratungstate Determination of arsenic content. This Part applies to tungsten powder, tungsten measure, tungsten trioxide, tungsten blue, purple tungsten, tungsten carbide, tungsten acid, ammonium metatungstate, ammonium paratungstate arsenic content set. Determination range of 0.00005% to 0.020%.2 Method summaryTungsten powder, tungsten, tungsten blue, fine particles of tungsten carbide and sodium hydroxide, hydrogen peroxide decomposition; tungsten trioxide, tungstic acid, ammonium paratungstate, metatungstate acid With ammonium hydroxide decomposition; purple tungsten, tungsten carbide coarse particles after burning into tungsten trioxide decomposition with sodium hydroxide. Phosphate tungsten complex in hydrochloric acid medium Stroma, thiourea, ascorbic acid and titanium trichloride restore the pentavalent arsenic to trivalent by flow injection - hydride generator and atomic absorption spectrometer MS determination of arsenic content.3 ReagentsUnless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity. 3.1 Hydrogen peroxide (ρ = 1.10g/mL), pure class distinctions. 3.2 phosphoric acid (ρ = 1.69g/mL). 3.3 Sodium hydroxide solution (100g/L). 3.4 hydrochloride (14). 3.5 thiourea solution (100g/L). 3.6 ascorbic acid solution (50g/L). 3.7 titanium trichloride solution. Pipette 10mL conc titanium trichloride solution [15% ~ 20% (w/w)], hydrochloride (19) was diluted to 100mL. The time is now equipped with. 3.8 solution of potassium borohydride (10g/L). Weigh 2g 0.6g potassium borohydride and sodium hydroxide dissolved in 200mL of water. The time is now equipped with. 3.9 tungsten matrix. the nature of the sample should be substantially similar to the arsenic content is not more than 0.00005%. 3.10 arsenic standard stock solution. Weigh 0.1320g advance by 110 ℃ drying of arsenic trioxide benchmark reagents, beaker, add 1mL sodium hydroxide solution (3.3) was dissolved with hydrochloric acid (19) and move to 1000mL volumetric flask, dilute to the mark with hydrochloric acid (19) Degree, shake. This solution 1mL containing 0.1mg arsenic. 3.11 Arsenic Standard Solution A. Pipette 10.00mL arsenic standard stock solution (3.10) in 200mL volumetric flask, with hydrochloric acid solution (19) diluted To the mark, shake, solution 1mL containing 5μg arsenic. 3.12 arsenic standard solution B. Pipette 20.00mL arsenic standard solution A (3.11) in 200mL volumetric flask, with hydrochloric acid solution (19) Dilute to the mark, shake, 1mL solution containing 0.5μg arsenic. 3.13 phenolphthalein solution (10g/L). Weigh 1g phenolphthalein dissolved in 100mL absolute ethanol. 3.14 HCl carrier (199). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4324.5-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 4324.5-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4324.5-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4324.5-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4324.5-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4324.5-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
