GB/T 42264-2022 English PDFUS$1419.00 ยท In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 42264-2022: Technical requirements for air pollutant governance facilities of fried brick and tile industry Status: Valid
Basic dataStandard ID: GB/T 42264-2022 (GB/T42264-2022)Description (Translated English): Technical requirements for air pollutant governance facilities of fried brick and tile industry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q15 Classification of International Standard: 13.040.99 Word Count Estimation: 70,748 Date of Issue: 2022-12-30 Date of Implementation: 2023-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 42264-2022: Technical requirements for air pollutant governance facilities of fried brick and tile industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 13.040.99 CCSQ15 National Standards of People's Republic of China Sintered brick and tile industry air pollutants Governance facility technical requirements Posted on 2022-12-30 2023-07-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 3 4 Pollutants and pollution load 5 5 General requirements 6 6 design 8 7 main equipment and materials 31 8 Inspection and process control 39 9 Main auxiliary works 43 10 Safety and Occupational Health 44 11 Engineering construction and acceptance 45 12 Operation and Maintenance 46 Appendix A (informative) Technical characteristics and scope of application of electrostatic precipitator efficiency improvement technology and efficiency improvement device 51 Appendix B (Normative) Evaluation method of dust removal easiness for raw material fuel by electrostatic precipitator 53 Appendix C (Informative) Typical Governance Technology Route 54 Appendix D (informative) Main system flow of typical limestone/lime-gypsum wet desulfurization emission technology 62 Appendix E (informative) Technical characteristics of different denitrification reducing agents 65 Reference 66forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Building Materials Federation. This document is under the jurisdiction of the National Standardization Technical Committee of Building Materials for Wall, Roof and Road (SAC/TC285). This document is drafted by. China Brick and Tile Industry Association, Haoyao Times (Fujian) Group Co., Ltd., Beijing Lideheng Environmental Protection Engineering Co., Ltd. Division, Gongli Machinery Co., Ltd., China City Investment Group Eighth Engineering Bureau Co., Ltd., Xi'an Kiln Equipment Research Institute, Linyi Yindi Machinery Manufacturing Co., Ltd. Co., Ltd., Leshan Hongchuan Environmental Protection Equipment Co., Ltd., China National Inspection and Testing Holding Group Xi'an Co., Ltd., Building Materials Industry Technology Supervision and Research Institute Research Center, Henan Yaxin Kiln Co., Ltd., Guangdong Wanyin Technology Co., Ltd., Dongguan Yongan Environmental Protection Technology Co., Ltd., Tianjin Binhuan Chemical Engineering Technology Research Institute Co., Ltd., China Railway 25th Bureau Group Fifth Engineering Co., Ltd., Zhejiang Fangyuan Building Materials Co., Ltd., Taizhou City Taifeng Environmental Protection Equipment Co., Ltd., Xi'an Liyuan Furnace Automation Equipment Co., Ltd., South China Environmental Science Research Institute of the Ministry of Ecology and Environment, Shandong Gold Mao Automation Equipment Co., Ltd., Gongyi Lianghui Environmental Protection Technology Co., Ltd., Gushi Great Wall Kiln Technology Co., Ltd., Liaocheng Runhong Glass Glass Steel Equipment Engineering Co., Ltd. The main drafters of this document. Zhou Xuan, Cheng Zhifeng, Guo Jing, Gao Ling, Shao Sanhu, Li Tao, Jiang Boxiong, Wu Zhanxing, Xu Qijiao, Zhao Wankun, Yu Peiqin, Liu Qinfeng, Chen Xinzhi, Chen Quansheng, Luo Jian, Zhang Xuhai, Wu Zonggang, You Haiyang, Bai Haocang, Cen Chaoping, Zhao Hailiang, Li Xueliang, Yang Jian, Feng Changbo, Chang Hao, Tang Jinquan, Liu Hongyan, Wang Zengzhen, Gao Hua, Liu Ning, Bai Chenggang, Lu Peng, Yu Xueqin. Sintered brick and tile industry air pollutants Governance facility technical requirements1 ScopeThis document specifies the pollutants and pollution load, general requirements, design, Main equipment and materials, testing and process control, main auxiliary engineering, safety and occupational health, engineering construction and acceptance, operation and maintenance technology technical requirements. This document is applicable to the discharge project of air pollutant control facilities in the sintered brick and tile industry, and the environmental impact assessment of the construction projects of sintered brick and tile enterprises. Price, design, construction, commissioning, acceptance and operation management of environmental protection facilities, as well as environmental supervision and approval of pollutant discharge permits. Non-fired brick and tile enterprises The discharge engineering of air pollutant control facilities can be implemented as a reference.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 2893.1 Graphical symbols Safety colors and safety signs Part 1.Design principles for safety signs and safety signs GB 2894 Safety Signs and Guidelines for Their Use GB/T 3087 Seamless steel tubes for low and medium pressure boilers GB/T 5310 Seamless steel tubes for high pressure boilers GB/T 6719 Technical requirements for bag filter GB 7231 Basic identification colors, identification symbols and safety signs of industrial pipelines GB 8978 Comprehensive Wastewater Discharge Standard GB 12158 General guidelines for preventing electrostatic accidents GB 12348 Environmental Noise Emission Standard for Industrial Enterprise Boundary GB/T 12801 General Principles of Safety and Sanitation Requirements for Production Process GB/T 13491 General Rules for Packaging of Paint Products GB/T 13931 Performance test method of electrostatic precipitator GB/T 16157 Determination of Particulate Matter in Exhaust Gas from Stationary Pollution Sources and Sampling Methods for Gaseous Pollutants GB 17681 Technical Requirements for Acceptance of Safety Monitoring and Early Warning System for Flammable and Explosive Tank Areas GB 18218 Identification of Major Hazard Sources of Hazardous Chemicals GB 18599 Pollution Control Standards for General Industrial Solid Waste Storage and Landfill GB/T 19229.1 Coal-fired flue gas desulfurization equipment Part 1.Coal-fired flue gas wet desulfurization equipment GB/T 19229.2 Coal-fired flue gas desulfurization equipment Part 2.Coal-fired flue gas dry/semi-dry desulfurization equipment GB/T 21508 Performance test method for coal-fired flue gas desulfurization equipment GB/T 21509 Coal-fired flue gas denitrification technology and equipment GB/T 22395 Code for Design of Boiler Steel Structure GB 26164.1 Electrical Safety Work Regulations Part 1.Thermal and Mechanical GB/T 27869 Electric bag composite dust collector ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42264-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 42264-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 42264-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42264-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
