GB/T 42213-2022 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42213-2022: Requirements for space payloads re-flight
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 42213-2022	279	Add to Cart	3 days	Requirements for space payloads re-flight	Valid

Similar standards

GB/T 43223   GB/T 32453   GB/T 32307   GB/T 43224   

Basic data

Standard ID: GB/T 42213-2022 (GB/T42213-2022)
Description (Translated English): Requirements for space payloads re-flight
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: V71
Classification of International Standard: 49.020
Word Count Estimation: 14,165
Date of Issue: 2022-12-30
Date of Implementation: 2023-07-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 42213-2022: Requirements for space payloads re-flight

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 49.020 CCSV71 National Standards of People's Republic of China Space Payload Refly Requirements Posted on 2022-12-30 2023-07-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General requirements 2 5 re-fly work item 3 5.1 Re-fly Sustainability Assessment 3 5.2 Re-fly technical status analysis 3 5.3 Re-fly risk management 4 5.4 State change process control 4 5.5 Re-flight Technical Status Verification 4 5.6 Re-flight evaluation and release 6 Appendix A (Normative) Assessment Release Inspection Item Table 7 Appendix B (Informative) Checklist Sample 11

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document was proposed by the Chinese Academy of Sciences. This document is under the jurisdiction of the National Space Science and Its Application Standardization Technical Committee (SAC/TC312). This document is drafted by. Center for Space Application Engineering and Technology, Chinese Academy of Sciences, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Chinese Academy of Sciences College Changchun Institute of Optics, Fine Mechanics and Physics, Institute of Optoelectronics Technology, Chinese Academy of Sciences, Beijing Space Vehicle Overall Design Department. The main drafters of this document. Huang Kun, Li Peng, Dang Wei, Fu Hongyong, Zhao Liping, Deng Xiaomei, Yuan Yongchun, Guo Xu, Fan Bin, Liang Xiaofeng, Zhao Zhenhao.

Introduction

On-orbit reuse of space payloads can reduce project costs and shorten ground preparation time, while ensuring that functions and performance meet requirements and Under the premise of safety and reliability, carrying out on-orbit missions in the form of reflight is an important way to deal with the problems of high density of space missions and high development costs. The use of refly payloads has the following three characteristics. a) Need to recover scientific experiment equipment and samples after completing the mission in orbit; b) Space science programs have continuity and commonality, so there are cases where the functions and structures of payload equipment are similar or even the same However, the generalized and standardized payload development method increases the possibility of re-flying missions on different spacecraft platforms. sex; c) The quality level of components used in payload equipment has been continuously improved, ensuring that the design life of the payload far exceeds that of space science The mission cycle, the payload can still work normally after recovery, and has the basic ability to perform re-flying missions. This document will standardize my country's space payload re-flying missions, promote the establishment of a generalized and internationalized space science platform, and facilitate the global Large-scale, long-term, and multi-type space science experiment projects within the scope of cooperation. Space Payload Refly Requirements

1 Scope

This document specifies the work items and content requirements for the space payload to perform the ground phase before the reflight mission. This document is applicable to the execution of payload plans on space vehicle platforms such as satellites, spaceships, space laboratories, space stations, and space probes Ground preparation for the refly mission.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 19017 Quality Management Technology Status Management Guidelines GB/T 30114.1 Terminology for Space Science and Its Applications Part 1.Basic General GB/T 32299 Aerospace project risk management

3 Terms and Definitions

GB/T 19017, GB/T 30114.1, GB/T 32299 and the following terms and definitions apply to this document. 3.1 re-flight After returning to the ground after going through the orbital operation of the space, the related activities of planning the orbital operation again. 3.2 re-flight space payloads Equipment loaded on the space vehicle platform and planned to fly again, especially the instruments for performing space science, space exploration and applied research missions device, device or system. Note. Hereinafter referred to as "re-fly load". 3.3 original status original status No design changes will be made to the re-fly payload, such as function and performance, structure, material, interface, etc., and the original technical status of the payload will be maintained. 3.4 refurbishment status refurbishment status Make changes to the re-fly load and replace the technical status of life-limited parts. 3.5 Improvement status improvementstatus The main functions and performances of the re-flying payload remain unchanged, and the secondary functions and performances of the payload are optimized or added or deleted. state. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 42213-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 42213-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 42213-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 42213-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.