GB/T 42125.17-2024 English PDFUS$514.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 42125.17-2024: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 17: Particular requirements for equipment intended to be used in educational establishments by children Status: Valid
Basic dataStandard ID: GB/T 42125.17-2024 (GB/T42125.17-2024)Description (Translated English): Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 17: Particular requirements for equipment intended to be used in educational establishments by children Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Classification of International Standard: 19.080 Word Count Estimation: 26,220 Date of Issue: 2024-11-28 Date of Implementation: 2025-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 42125.17-2024: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 17: Particular requirements for equipment intended to be used in educational establishments by children---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 17.Particular requirements for equipment intended to be used in educational establishments by children Safety of electrical equipment for measurement, control and laboratory use Requirements Part 17.Children in educational institutions Special requirements for equipment use Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 17.Particular requirements for equipment intended to be used in educational establishments by children (IEC 61010-2-130.2021, Safety requirement for electrical equipment for measurements, control, and laboratory use-Part 2-130.Particular requirements for equipment intended to be used in educational establishments by children, IDT) ICS 19.080 CCS N 10 National Standard of the People's Republic of China Published on 2024-11-28 Implemented on 2025-12-01 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface ... Ⅲ Introduction ... Ⅳ 1 Scope and Purpose ... 1 2 Normative references ... 1 3 Terms and Definitions 2 4 Experiments ... 2 5 Logo and Documentation ... 3 6 Protection against electric shock ... 5 7 Protection against mechanical hazards ... 6 8 Mechanical stress resistance ... 10 9 Prevent the spread of fire ... 10 10 Temperature limits and heat resistance of equipment ... 10 11 Protection against hazards from fluids and solid foreign matter ... 11 12 Protection against radiation (including laser sources), sound pressure and ultrasonic pressure 11 13 Protection against released gases and substances, explosions and implosions 12 14 Components and Assemblies ... 12 15 Protection by interlocking device ... 13 16 Hazards caused by application ... 13 17 Risk Assessment ... 13 Appendix ... 15 Appendix B (Normative) Standard Test Guidelines 16 References ... 16ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document is part 17 of GB/T 42125 Safety requirements for electrical equipment for measurement, control and laboratory use. The following parts have been published. Part 1.General requirements;- Part 2.Particular requirements for laboratory equipment for heating materials; Part 3.Particular requirements for refrigeration equipment; Part 4.Particular requirements for climate and environmental tests and other temperature regulation equipment; Part 5.Particular requirements for laboratory centrifuges; Part 7.Safety requirements for hand-held and hand-operated probe assemblies for electrical measurement and testing; Part 10.Particular requirements for insulation resistance measurement and dielectric strength test equipment; - Part 14.Particular requirements for automatic and semi-automatic equipment for laboratory use for analytical and other purposes; - Part 17.Particular requirements for equipment used by children in educational institutions; Part 18.Particular requirements for control equipment; - Part 19.Particular requirements for electrically controlled valve actuators. - This document is equivalent to IEC 61010﹘2﹘130.2021 "Safety requirements for electrical equipment for measurement, control and laboratory use Part 2﹘130 Part 1.Particular requirements for equipment used by children in educational institutions. The following minimal editorial changes were made to this document. In order to coordinate with the existing standards, the name of the standard was changed to "Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 17" Part 1.Special requirements for the use of equipment by children in educational institutions; The informative Appendix L “Term Index” has been deleted. - Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Safety Standardization of Measurement, Control and Laboratory Electrical Equipment (SAC/TC 338). This document was drafted by. Mechanical Industry Instrumentation Comprehensive Technical and Economic Research Institute, Beijing Institute of Graphic Communication, China Quality Certification Center, Beijing Medical Device Inspection Institute (Beijing Medical Biological Protection Equipment Inspection and Research Center), Fujian Shunchang Hongrun Precision Instrument Co., Ltd. China Electronics Technology Standardization Institute, China Silian Instrument Group Co., Ltd., Fujian Shangrun Precision Instrument Co., Ltd., China National Accreditation Service for Conformity Assessment, MicroPort Investment Holdings Co., Ltd., Sichuan Institute for Drug Control (Sichuan Medical Device Testing Center Center), Guangdong Medical Device Quality Supervision and Inspection Institute, Shanghai Instrument and Automation System Inspection and Testing Institute Co., Ltd., Liaoning Provincial Metrology Science Research Institute, Guangzhou Lightia Lighting Co., Ltd., Rhine Testing and Certification Services (China) Co., Ltd., Zhengzhou Great Wall Science and Technology Industry and Trade Co., Ltd. Company, Fujian Product Quality Inspection Institute, Zhejiang Keen Experimental Equipment Co., Ltd., Hunan Strict Intelligent Technology Co., Ltd., Hunan Hahang Hydraulic Technology Co., Ltd., Hangzhou Meiyi Automation Co., Ltd. The main drafters of this document are. Shang Yujia, Jiao Huimin, Hu Nan, Liu Xiaojing, Feng Lei, Chen Zhiyang, Guo Jianyu, Li Jinlan, Ge Jian, Ni Jia, Wang Liwen, Ding Yi, Guan Hui, Fan Xiang, Zhang Yixiang, Liang Guoding, Lu Henan, Mai Miao, Wang Chengying, Wang Jiakai, Zhu Nairong, Yuan Lijun, Jiang Hanxiong, An Kang, Liu Na, and Ye Zhizeng.IntroductionGB/T 42125 "Safety requirements for electrical equipment for measurement, control and laboratory use" is planned to consist of 20 parts. Part 1.General requirements. The purpose is to specify the general safety requirements of electrical equipment for measurement, control and laboratory use and their accessories. Require. Part 2.Particular requirements for laboratory equipment for heating materials. The purpose is to specify the special requirements for laboratory equipment for heating materials. All requirements. Part 3.Particular requirements for refrigerating equipment. The purpose is to specify special safety requirements for refrigerating equipment for measurement, control and laboratory use. Part 4.Special requirements for climate and environmental tests and other temperature regulation equipment. The purpose is to specify climate and environmental tests And special safety requirements for other temperature regulating equipment. Part 5.Particular requirements for laboratory centrifuges. The purpose is to specify the special safety requirements for laboratory centrifuges. Part 6.Particular requirements for test and measuring circuits. The purpose is to specify special safety requirements for test and measuring circuits. Part 7.Safety requirements for hand-held and hand-operated probe assemblies for electrical measurement and testing. The purpose is to specify the safety requirements for hand-held and hand-operated probe assemblies. Safety requirements for components and related accessories. Part 8.Particular requirements for hand-held and hand-operated current sensors for electrical measurement and testing. Special safety requirements for flow sensors. Part 9.Particular requirements for hand-held multimeters for household and professional use capable of measuring mains voltage. Particular safety requirements for hand-held multimeters for household and professional use operating at mains voltage. Part 10.Particular requirements for insulation resistance measurement and dielectric strength test equipment. The purpose is to specify the output voltage AC 50 V or Safety requirements for equipment used for insulation resistance measurement and dielectric strength testing above 120 V DC. Part 11.Particular requirements for sterilizers and washer-disinfectors for processing medical materials. Particular safety requirements for sterilizers and washer-disinfectors. Part 12.Particular requirements for mixing and stirring equipment for laboratory use. The purpose is to specify electric mixers for mechanical stirring and agitation. Particular safety requirements for laboratory equipment and its accessories. Part 13.Particular requirements for laboratory atomic spectrometers using thermal atomization and ionization. Particular safety requirements for atomic spectrometers involving protonation and ionization. Part 14.Particular requirements for automatic and semi-automatic equipment for laboratory use for analytical and other purposes. Particular safety requirements for automatic and semi-automatic equipment for analysis and other purposes. Part 15.Particular requirements for cabinet type X-ray systems. The purpose is to specify the special safety requirements for cabinet type X-ray systems. Part 16.Particular requirements for in vitro diagnostic (IVD) medical devices. The purpose is to specify the intended use for in vitro diagnostic medical purposes Special requirements for medical devices. Part 17.Particular requirements for equipment used by children in educational institutions. The purpose is to specify the equipment used by student operators in educational institutions. Particular safety requirements for equipment and accessories. Part 18.Particular requirements for control equipment. The purpose is to specify the special requirements for control equipment used in industrial environments and related Identification test. Part 19.Particular requirements for electric control valve actuators. The purpose is to specify the requirements for electric control valve actuators used for installation in industrial processes or discrete control loops. Safety requirements for electric control valve actuators and solenoid coils in an environment. Part 20.Particular requirements for industrial communication circuits and communication port interconnections. The purpose is to specify the requirements for industrial communication circuits and communication port interconnections installed in process or discrete control loops. Special safety requirements for industrial communication circuits in an environment. Note. The correspondence between each part and the IEC 61010 series standards is as follows. Part 1 corresponds to IEC 61010﹘1; - Part 2 corresponds to IEC 61010﹘2﹘010; - Part 3 corresponds to IEC 61010﹘2﹘011; - Part 4 corresponds to IEC 61010﹘2﹘012; - Part 5 corresponds to IEC 61010﹘2﹘020; - Part 6 corresponds to IEC 61010﹘2﹘030; - Part 7 corresponds to IEC 61010﹘031; - Part 8 corresponds to IEC 61010﹘2﹘032; - Part 9 corresponds to IEC 61010﹘2﹘033; - Part 10 corresponds to IEC 61010﹘2﹘034; - Part 11 corresponds to IEC 61010﹘2﹘040; - Part 12 corresponds to IEC 61010﹘2﹘051; - Part 13 corresponds to IEC 61010﹘2﹘061; - Part 14 corresponds to IEC 61010﹘2﹘081; - Part 15 corresponds to IEC 61010﹘2﹘091; - Part 16 corresponds to IEC 61010﹘2﹘101; - Part 17 corresponds to IEC 61010﹘2﹘130; - Part 18 corresponds to IEC 61010﹘2﹘201; - Part 19 corresponds to IEC 61010﹘2﹘202; - Part 20 corresponds to IEC 61010﹘2﹘203.- The purpose of this document is to specify special safety requirements for equipment and accessories used by student operators in educational institutions. Operators are children between the ages of 3 and 16 who operate electrical equipment under the supervision of a responsible person. The device and its accessories are intended for use in educational institutions, as expressly stated in the documentation accompanying the device or in the sales and marketing materials. This does not restrict other devices from being used in educational institutions. When devices and accessories that do not meet the requirements of this document are used by student operators Additional measures and certification may be required. Predictable behavior by student operators includes poking into materials and objects accompanying the equipment and accessories, causing additional damage to the determination of reasonably foreseeable misuse. Therefore, educational equipment requires more stringent standards for access to potentially hazardous parts than general laboratory equipment. The maximum temperature of parts that may be touched by children should be lower than the maximum temperature of equipment that adults may touch. People consider ergonomics and mechanical hazards. This document should be combined with GB/T 42125.1-2024 "Safety requirements for electrical equipment for measurement, control and laboratory use Part 1.General Use with Requirements. The part marked "Applicable" in this document indicates that the corresponding clauses of GB/T 42125.1-2024 apply to this document; The part marked "replace" or "modify" indicates that the terms of this document shall prevail. The part marked "add" in this document indicates that in addition to complying with In addition to the corresponding clauses of GB/T 42125.1-2024, the additional clauses in this document must also be complied with. The clauses in 42125.1-2024 and the clauses added by this document are numbered starting with 101, for example, 3.5.101. Compared with GB/T 42125.1-2024, the main differences between this document and GB/T 42125.1-2024 are as follows. Add signs to indicate to the responsible person that the equipment is intended for use by student operators under supervision; a) Considering that children have the habit of inserting foreign objects, increase the accessibility requirement; b) Considering that children’s skin is more sensitive, the temperature limit is lowered; c) Considering that children are smaller in size, reduce the space requirements for mechanical contact; d) Limits for the introduction of non-parallel optical radiation; e) Reduce the limit of ionizing radiation; f) The use of removable parts smaller than a certain size is prohibited; g) Manufacturers are required to take into account the unpredictable behavior of student operators. h) Safety of electrical equipment for measurement, control and laboratory use Requirements Part 17.Children in educational institutions Special requirements for equipment use1 Scope and purposeExcept for the following contents, Chapter 1 of GB/T 42125.1-2024 is applicable. 1.1.1 Equipment to which this document applies delete. Delete the first paragraph. replace. Replace the content before the lettered item in the second paragraph with the following. This document specifies the special requirements for equipment of types a), b) or c) and their accessories in educational institutions intended for use by children under the supervision of responsible persons. This document specifies the general safety requirements for equipment in educational institutions intended for use by children aged 3 to 16 years under the supervision of a responsible person. Require. Children are persons between the ages of 3 and 16. Pupils who require additional educational or physical support may have needs beyond the limits in this document (see Chapter 17, Risk Assessment). NOTE 1 The term “child” is used in this document differently from the definition in ISO /IEC Guide 50 and other documents. If equipment or parts of equipment are within the scope of the IEC 61010 series of standards and are also within the scope of this document, then other parts The requirements of the standard apply. NOTE 2 In some countries, age limits may differ from those used in this document, or age limits may be replaced by competency requirements. 1.1.3 Computing Devices Modify note to note 1. Increase. Add the following note after the original note. Note 2.General information technology equipment used in educational institutions by children, such as projectors, tablet computers, monitors, electronic whiteboards, power supplies, etc., are not included in this equipment within the scope of this document unless such equipment is specifically designed for equipment types within the scope of the IEC 61010 series of standards. 1.2.1 Aspects included in the scope of this document Replace the original note with the following note. NOTE 1 Attention should be paid to additional requirements imposed by national authorities responsible for health and safety in education. In particular, there may be radiation materials, X-rays, laser equipment, etc. and limit values for hazardous substances. NOTE 2.Attention may be drawn to additional requirements imposed by national authorities responsible for the health and safety of children in education.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies. in this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42125.17-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 42125.17-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 42125.17-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42125.17-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
