GB/T 41869.4-2024 English PDFUS$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 41869.4-2024: Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties Status: Valid
Basic dataStandard ID: GB/T 41869.4-2024 (GB/T41869.4-2024)Description (Translated English): Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L51 Classification of International Standard: 31.260 Word Count Estimation: 26,22 Date of Issue: 2024-11-28 Date of Implementation: 2025-03-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 41869.4-2024: Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Optics and photonics - Microlens arrays - Part 4.Test methods for geometrical properties Optics and Photonics Microlens Arrays Part 4.Geometrical properties test methods Optics and photonics-Microlens arrays- Part 4.Test methods for geometrical properties (ISO 14880﹘4.2006, MOD) ICS 31.260 CCS L 51 National Standard of the People's Republic of China Released on 2024-11-28 2025-03-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface ... Ⅲ Introduction ... V 1 Scope ... 1 2 Normative references ... 1 3 Terms and Definitions ... 1 4 Coordinate system ... 2 5 Sample preparation ... 2 6 Measurement of pitch and surface relief depth ... 3 7 Thickness measurement ... 7 8 Measurement of curvature radius ... 8 9 Test results and uncertainties 10 10 Test Report ... 10 Appendix A (Informative) Microlens Array Spacing Uniformity Test ... 12 Appendix B (Normative) Curvature radius test method based on Fizeau interferometer ... 15 References ... 17ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document is part 4 of GB/T 41869 "Optics and Photonics Microlens Arrays". GB/T 41869 has published the following part. Part 1.Terminology;- Part 2.Test methods for wavefront aberrations; Part 3.Test methods for optical properties; Part 4.Test methods for geometrical properties. - This document is modified to adopt ISO 14880﹘4.2006 "Optics and photonics microlens arrays Part 4.Geometric properties test method". Compared with ISO 14880﹘4.2006, this document has made the following structural adjustments. Chapter 5 corresponds to 5.4 of ISO 14880﹘4.2006; - 6.2.1 corresponds to 5.1.1.1 of ISO 14880﹘4.2006; - 6.2.2 corresponds to 5.1.1.2 and 5.1.1.3 of ISO 14880﹘4.2006; - 6.2.3 corresponds to 5.1.1.2 of ISO 14880﹘4.2006; - 6.3 corresponds to 5.1.2 of ISO 14880﹘4.2006; - 6.4.1 corresponds to 6.1.1 of ISO 14880﹘4.2006; - 6.4.2 corresponds to 6.1.2 of ISO 14880﹘4.2006; - 7.1 corresponds to 5.2.1 of ISO 14880﹘4.2006; - 7.2 and 7.3 correspond to 6.2 of ISO 14880﹘4.2006; - 8.1 corresponds to 5.3.1 of ISO 14880﹘4.2006; - 8.2.1 corresponds to 5.3.2.1 of ISO 14880﹘4.2006; - 8.2.2 corresponds to 5.3.2.2 of ISO 14880﹘4.2006; - 8.3 corresponds to 5.3.2.3 of ISO 14880﹘4.2006; - 8.4 corresponds to 6.3 of ISO 14880﹘4.2006; - Chapter 9 corresponds to Chapter 7 of ISO 14880﹘4.2006; - Chapter 10 corresponds to Chapter 8 of ISO 14880﹘4.2006; - Appendix A corresponds to Appendix B of ISO 14880﹘4.2006; - Appendix B corresponds to Appendix A of ISO 14880﹘4.2006.- The technical differences between this document and ISO 14880﹘4.2006 and their reasons are as follows. The normative reference GB/T 41869.1-2022 replaces ISO 14880﹘1 (see Chapter 3) to adapt to my country's technology condition; The term "microlens array thickness" (see 3.3 of ISO 14880﹘4.2006) has been deleted to adapt to my country's technical conditions; - The requirements for interferometry methods were changed and the informative references ISO 14880﹘2 and ISO /TR 14999﹘1 were adjusted to normative references. GB/T 41869.2 and ISO /TR 14999﹘1.2005 (see 8.2.1) are used to adapt to my country's technical conditions; The temperature requirements have been changed (see Chapter 5), with an additional ±2°C range on the basis of 20°C, taking into account the temperature instruments used in actual tests. The impact of errors on the results; Added an overview of "Measurement of Pitch and Surface Relief Depth" (see 6.1), describing contact profilometers and confocal microscopy The applicable scenarios of the two test methods make it easier for readers to choose the corresponding test method according to actual conditions; Added the test preparation of "Confocal Microscope Test Method" (see 6.3.5) to facilitate readers' understanding and operation; - Added the manufacturers and models of "Confocal microscopes and microscopes" in the test equipment (see Chapter 10) to accommodate the technology of our country condition; Added interference optical test method (see Appendix B) to adapt to my country's technical conditions and increase operability; Deleted the Shack-Hartmann device in the “Test method for radius of curvature based on Fizeau interferometer” (see ISO 14880﹘4. 2006), this equipment does not fall within the scope of interferometer test equipment. The following editorial changes were made to this document. Deleted Note 2 of 3.1; - Deleted Note 3 of 3.2; - Adjust the paragraph 6.1.1 of ISO 14880﹘4.2006 to a list format (see 6.4.1); - Adjust the paragraph 6.3 in ISO 14880﹘4.2006 to be expressed in item form (see 8.4). - Please note that some of the contents of this document may involve patents, and the issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Optics and Photonics (SAC/TC 103). This document was drafted by. Xi'an Institute of Applied Optics, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Southwest Institute of Technical Physics Institute, China Ordnance Industry Standardization Institute, Guangdong Opto-Mandy Technology Co., Ltd., Zhejiang Weixing Optics Co., Ltd., Aipu Optical Technology (Xiamen) Co., Ltd., Shenzhen Dongzheng Optical Technology Co., Ltd., Zhejiang Crystal Optoelectronics Technology Co., Ltd., HIGH TECHNOLOGY INC. The main drafters of this document are. Peng Fulun, Zhang Weiguo, Ye Dahua, Meng Yinxia, Ren Junyu, Meng Fanping, Wang Yansong, Wu Jianbin, Cao Yu, Jin Lijian, Li Zeyuan, Tu Kexu.IntroductionMicrolens array is an important optical element in array optical devices. It is widely used in the form of single lens, two or more lens arrays. Widely used in three-dimensional displays, coupling optics related to array optical radiation sources and optical detectors, enhanced liquid crystal displays and optical parallel processor components. With the continuous advancement of science and technology, it is necessary to formulate a set of national standards with technical content in line with international standards, which will not only help promote the development of micro-transmitters in my country, but also The mirror array industry can develop in a standardized and orderly manner, and can better promote trade, exchanges and technical cooperation in related fields. The "Photonics Microlens Array" was drafted and formulated in this context. The microlens array standard is planned to consist of the following four parts. Part 1.Terminology. The purpose is to facilitate the application of microlens array products by defining the basic terms of microlenses and their arrays. It helps researchers and industry practitioners to exchange concepts based on a common understanding. Part 2.Test method for wavefront aberration. The purpose is to clarify the basic Performance characteristics. Part 3.Optical property test methods. The purpose is to improve the quality of optical properties of different suppliers by standardizing the test methods of the main optical property indicators. The compatibility and interchangeability of products from other parties will promote the advancement of microlens array technology. Part 4.Geometric property test methods. The purpose is to standardize the test methods of the main geometric property indicators and standardize the test methods of the different suppliers. To ensure the consistency of supplier product performance and expand its application areas. Optics and Photonics Microlens Arrays Part 4.Geometrical properties test methods1 ScopeThis document describes the test parameters, test principles, test equipment, test preparation, test procedures and test results report. This document is applicable to the testing of geometric characteristics of microlens arrays with surface relief structures and gradient refractive index microlens arrays.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies. in this document. GB/T 41869.1-2022 Optics and photonics Microlens arrays Part 1.Terminology (GB/T 41869.1-2022, ISO 14880﹘1.2019, MOD) GB/T 41869.2 Optics and photonics Microlens arrays Part 2.Test method for wavefront aberration (GB/T 41869.2-2022, ISO 14880﹘2.2006, MOD) ISO /TR 14999﹘1.2005 Optics and photonics Interferometry of optical elements and optical systems Part 1.Terminology, definitions and Optics and photonics-Interferometric measurement of optical elements and optical systems terms-Part 1.Terms, definitions and fundamental relationships)3 Terms and definitionsThe terms and definitions defined in GB/T 41869.1-2022 and the following apply to this document. NOTE 1 This document uses symbols to describe the geometrical properties of microlens arrays, some of which may not be commonly used to describe surface structure measurements. Note 2.This document uses Px, Py and h to describe the geometric parameters in surface structure measurement. Px, Py are the spacings, as defined in 3.1.h is the surface relief depth, See 3.2 for definition. See Figure 1 for the geometrical parameters of the microlens array. Index number description. 1 - substrate; Tc ─ physical thickness; Rc - radius of curvature; Px, Py - spacing; h - surface relief depth (lens sagittal height). Fig.1 Geometric parameters of microlens array ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41869.4-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 41869.4-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 41869.4-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41869.4-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
