GB/T 41853-2022 English PDFUS$384.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 41853-2022: Semiconductor devices - Micro-electromechanical devices - Wafer to wafer bonding strength measurement Status: Valid
Basic dataStandard ID: GB/T 41853-2022 (GB/T41853-2022)Description (Translated English): Semiconductor devices - Micro-electromechanical devices - Wafer to wafer bonding strength measurement Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L55 Classification of International Standard: 31.080.99 Word Count Estimation: 22,264 Date of Issue: 2022-10-14 Date of Implementation: 2022-10-12 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 41853-2022: Semiconductor devices - Micro-electromechanical devices - Wafer to wafer bonding strength measurement---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Semiconductor devices -- Micro-electromechanical devices -- Wafer to wafer bonding strength measurement ICS 31.080.99 CCSL55 National Standards of People's Republic of China Semiconductor Devices Micro-Electro-Mechanical Devices Bond Strength Measurement Between Wafers Published on 2022-10-12 2022-10-12 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Measurement method 1 4.1 General 1 4.2 Visual inspection method 1 4.3 Tensile test method 2 4.4 Double Cantilever Test Method 4 4.5 Electrostatic test method 6 4.6 Bubble test method 7 4.7 Three-point bending test method 9 4.8 Chip Shearing Test Method 12 Appendix A (Informative) Bond Strength Example 15 Appendix B (Informative) Example of Manufacturing Process of Three-point Bending Test Specimen 16 Reference 17 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is equivalent to IEC 62047-9.2011 "Semiconductor Devices Microelectromechanical Devices Part 9.Inter-wafer bonding of MEMS Strength Measurement". A chapter "Terms and Definitions" has been added to this document. The following minimal editorial changes have been made to this document. a) In order to harmonize with existing standards, the name of the standard is changed to "Measurement of bond strength between wafers of MEMS devices for semiconductor devices"; b) Incorporating the amendments of IEC 62047-9.2011/COR1.2012, the outer margin position of the clauses involved is vertical Double lines (‖) are marked; c) Corrected errors in the original IEC 62047-9.2011.ISO 6892-1.2009 and ASTME399-06e2 in Chapter 2. 2008 is an informative reference in the text, delete ISO 6892-1.2009 and ASTME399-06e2.2008; in the bibliography Added ISO 6892-1.2009 and ASTME399-06e2.2008; d) Corrected the error in the original IEC 62047-9.2011.the two-dimensional plots in Figures 5 and 6 do not clearly identify the width of the specimen, Corrected to a three-dimensional diagram, Figure 6 added the unit label "unit is millimeter". Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Standardization Technical Committee of Microelectromechanical Technology (SAC/TC336). This document is drafted by. The Thirteenth Research Institute of China Electronics Technology Group Corporation, Hebei Beitai Electronic Technology Co., Ltd., China Machinery Productivity Promotion Center Co., Ltd., East China Institute of Optoelectronic Integrated Devices, Hangzhou Zuolan Microelectronics Technology Co., Ltd., Shenzhen Meisi Advanced Electronics Co., Ltd. Co., Ltd., Akashi Innovation (Yantai) Micro-Nano Sensing Technology Research Institute Co., Ltd., Shaoxing SMIC Manufacturing Co., Ltd. The main drafters of this document. Li Qian, Wang Weiqiang, Gu Feng, Li Genzi, Zhai Xiaofei, He Kaixuan, Tian Songjie, Liu Jiansheng, Cui Bo, Wu Bin, Wang Wei, Gao Feng, Wang Chong. Semiconductor Devices Micro-Electro-Mechanical Devices Bond Strength Measurement Between Wafers1 ScopeThis document specifies the method for measuring the bond strength after wafer bonding, which is applicable to various wafers such as silicon-silicon eutectic bonding, silicon-glass anodic bonding, etc. The circular bonding method, and the evaluation of the bonding strength of the relevant structural dimensions in the MEMS process and assembly process. This document applies to bond strength measurements between wafers from ten microns to several millimeters thick.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. IEC 60749-19 Mechanical and climatic test methods for semiconductor devices - Part 19.Chip shear strength (Semiconductor3 Terms and DefinitionsThere are no terms and definitions that need to be defined in this document.4 Measurement methods4.1 General Bonding strength measurement methods are. visual method, tensile test method, double cantilever beam test method, electrostatic test method, bubble (air tightness) test method, three Point bending (deformation) test method, and chip shear test method. 4.2 Visual inspection 4.2.1 Types of visual inspection methods By observing the color change of the silicon substrate and the glass surface, we can only determine the basic information of whether the two materials are bonded together. should be used The test method confirms whether a subsequent bond strength test should be performed, and which area should be selected for testing. The silicon-glass and glass-glass bonding interfaces should be observed with an optical microscope. An infrared camera should be used to observe the silicon-silicon bonding interface for voids. Note. Visual inspection is a qualitative test method. 4.2.2 Equipment Applicable inspection equipment may use one or more, including. Optical Microscope (OM), Scanning Acoustic Microscope (SAM), Scanning Electron Microscope Microscope (SEM), Transmission Electron Microscopy (TEM), and Infrared Camera (IR) or Optical Camera (OR). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41853-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41853-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 41853-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41853-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
