GB/T 4127.11-2008 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4127.11-2008: Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 4127.11-2008	209	Add to Cart	3 days	Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks	Valid

Similar standards

GB/T 2493   GB/T 2480   GB/T 23541   GB/T 4127.16   GB/T 4127.14   GB/T 4127.15   

Basic data

Standard ID: GB/T 4127.11-2008 (GB/T4127.11-2008)
Description (Translated English): Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J43
Classification of International Standard: 25.100.70
Word Count Estimation: 9,927
Date of Issue: 2008-06-03
Date of Implementation: 2009-01-01
Older Standard (superseded by this standard): GB/T 4127-1997
Adopted Standard: ISO 603-11-1999, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.9 (Total No.122)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the following models millstone dimensions, marking and requirements. In millimeters: 9010 Type: rectangular polished terrazzo, 9011 Type: Square polished terrazzo, 9020 Type: Triangle polished terrazzo, 9021 Type: knife-shaped polished terrazzo, 9030 Type: Round polished terrazzo, 9040 Type: semi- polished terrazzo. This section provides the abrasive surface suitable for a variety of generation and grinding, the workpiece by hand, polished terrazzo hand pull.

GB/T 4127.11-2008: Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Bonded abrasive products Dimensions Part 11. Hand finishing sticks ICS 25.100.70 J43 National Standards of People's Republic of China Partially replace GB/T 4127-1997 Abrasive size Part 11. Hand-held polishing grindstone (ISO 603-11.1999, MOD) Posted 2006-06-03 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 4127 "abrasive Size" is divided into 16 parts. --- Part 1. Cylindrical grinding wheel (workpiece clamping between centers); --- Part 2. centerless cylindrical grinding wheel; --- Part 3. inner circle grinding wheel; --- Part 4. Surface grinding with peripheral grinding wheel; --- Part 5. Surface grinding end face grinding wheel; --- Part 6. Tools and tool room grinding wheels for; --- Part 7. Manually operated grinding wheel; --- Part 8. deburring, snagging and rough grinding with a grinding wheel; --- Part 9. heavy-duty grinding wheel; --- Part 10. ultra-fine grinding and honing grindstone; --- Part 11. Hand polishing grindstone; --- Part 12. vertical grinder deburring and shortage of scrub round; --- Part 13. Vertical grinder deburring and shortage of scrub round; --- Part 14. angle grinder deburring, snagging and rough grinding wheel; --- Part 15. fixed or mobile cutting machine cutting wheel; --- Part 16. Hand-held power tool with a cutting wheel. This section GB/T Part 114 127, modification using ISO 603-11. section 1999 "abrasive size 11. Hand Holding polishing grindstone "(in English). Taking into account China's national conditions, in the use of ISO 603-11.1999 when this part has made several modifications. About the technical differences have been incorporated into the text And identifies a single vertical line in which they are involved with the provisions margin. This part of ISO 603-11.1999 for the degree of consistency Modify the use of the main differences are as follows. --- 9021 provision increased blade type grindstone; --- Marking products, technical requirements and to mark our national standards. This Part replaces GB/T 4127-1997 of "4.3 Rectangular millstone", "4.4 square millstone", "triangle millstone 4.5", "4.6 blade mill Stone "," millstone round 4.7 "," 4.8 semicircle millstone ", the main changes are as follows. --- In order to be consistent with international names such products, the standard of "ordinary abrasive" to "abrasive"; --- Increase the marked products, technical requirements and marking requirements. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee Abrasives (SAC/TC139) centralized. This section is drafted. Chengdu Wheel Co., Ltd. The main drafters of this section. Lin Bin. This part of the standard replaces the previous editions are. --- GB 4127-1984, GB/T 4127-1997. Abrasive size Part 11. Hand-held polishing grindstone

1 Scope

GB/T 4127 provisions of this section the following models grindstone dimensions, marking and requirements in millimeters. --- 9010 type. rectangle polishing grindstone; --- 9011 type. square polishing grindstone; --- 9020. Triangular polishing grindstone; --- 9021 type. blade polishing grindstone; --- 9030. Round polishing grindstone; --- 9040 type. semicircular polishing grindstone. Provisions of this Part apply to all kinds of abrasive surface generation and grinding, the workpiece with the hand, polishing grindstone hand pull.

2 Normative references

The following documents contain provisions which, through reference in this part of the GB/T 4127, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2484 Bonded Abrasives - General requirements (GB/T 2484-2006, ISO 525.1999, MOD) GB/T 2485 abrasive technical conditions

3 Dimensions

3.1 9010 Type. Rectangular millstone polishing Figure 1 and Table 1, Table 2. Fig. 19010 Type Table 19010 type polishing grindstone size (A series) in millimeters BCL ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 4127.11-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 4127.11-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 4127.11-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 4127.11-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.